And again. (she's alive) Tech1 touring 335i (pg3)
Moderator: martauto
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
na na i just wanna hear a sound clip with that system and that engine 

Considering Selling the Cabby, looks like its gonna go
-
zaust
- Zone day release
- Posts: 13007
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Somewhere in Hertfordshire , or press Ctrl + W
-
bmw-mad
- E30 Zone Addict

- Posts: 2684
- Joined: Fri Mar 02, 2007 11:00 pm
- Location: Birmingham
I think someone got there m30 running today 
-
zaust
- Zone day release
- Posts: 13007
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Somewhere in Hertfordshire , or press Ctrl + W
-
zaust
- Zone day release
- Posts: 13007
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Somewhere in Hertfordshire , or press Ctrl + W
-
fuzzy
- He who sleeps with "Gingers"
- Posts: 14351
- Joined: Sat Jun 04, 2005 11:00 pm
- Location: melbourne Australia
4 dodgy injectors? it must be quite rare to have 4 injectors failing at once?
-
zaust
- Zone day release
- Posts: 13007
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Somewhere in Hertfordshire , or press Ctrl + W
Yeah I know, Hooked them up out of the manifold and only one was doing it's job properly, They are supposed to have been sonic cleaned. More like sonic killed. Have stuck the small cc one's in out the 325 for the moment, I'm sure I still have a 8 of grey's from my cossie day's in my loft. If not I know I have some green's. Time to start digging.
Well at least it run's.
Well at least it run's.
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
Good news that, well done mate, been for a test drive yet?? 

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
zaust
- Zone day release
- Posts: 13007
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Somewhere in Hertfordshire , or press Ctrl + W
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
Good man, just be careful as the roads are really shit atm

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
nothing to do with back pressure, but hey howhipsey wrote:will there be enough back pressure to move it? i remember when mine fell off at the bottom of the downpipes it just mad shedloads of noise but got up to about 5mph in it
-
zaust
- Zone day release
- Posts: 13007
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Somewhere in Hertfordshire , or press Ctrl + W
Shes dead again.
On the drive to get the exhaust mated to the system. Heat went up. Checked and had to much pressure in the coolant system.
Went home did a gasket check, and it has gone. Already stripped it out and taken the head to be skimmed and checked. Should get it back by the end of the week so that means i can fit next monday (only day off) and should be complete again the monday after that.
Opend up on the way home from top gear. Absoulty grate sound with just a manifold on (through the hatfield tunnel) . Could not resist...
Oh well, Soon soon.
On the drive to get the exhaust mated to the system. Heat went up. Checked and had to much pressure in the coolant system.
Went home did a gasket check, and it has gone. Already stripped it out and taken the head to be skimmed and checked. Should get it back by the end of the week so that means i can fit next monday (only day off) and should be complete again the monday after that.
Opend up on the way home from top gear. Absoulty grate sound with just a manifold on (through the hatfield tunnel) . Could not resist...
Oh well, Soon soon.
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
Not good news Zaust, but hopefully you'll get there. 

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
gooner1
- Out humping Reindeer
- Posts: 13280
- Joined: Fri Apr 14, 2006 11:00 pm
- Location: Northampton.For my sins.
Sorry to here that Zaust, begining to feel guilty about selling you that lump now
Incidentally, have just PM the chap who cleaned the injectors, just in case it is his cleaning process that destroyed the injectors. What other reasons would there be for internal damage to injectors as a matter of interest?.
Incidentally, have just PM the chap who cleaned the injectors, just in case it is his cleaning process that destroyed the injectors. What other reasons would there be for internal damage to injectors as a matter of interest?.

-
zaust
- Zone day release
- Posts: 13007
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Somewhere in Hertfordshire , or press Ctrl + W
The gasket had dry'd out. Remember it had beed sitting for over two years and had no coolant in it. I should have done it before putting it in but i thought i'd get away with it. If I was paying someone to do the work it would be different but i'm enjoying it. It's time that's my problem as i only get monday's and just a few hour's at that.
Rob at least I know this is one very strong lump and won't need toching again for a long time once it's back together. And I managed to find my green injectors aswell as having a set of yellows given to me so no worries.
And yes I do think sonic cleaning is a bad thing. They should always be stored in a rail that still has fuel in and then they hold the pressure....
Rob at least I know this is one very strong lump and won't need toching again for a long time once it's back together. And I managed to find my green injectors aswell as having a set of yellows given to me so no worries.
And yes I do think sonic cleaning is a bad thing. They should always be stored in a rail that still has fuel in and then they hold the pressure....
-
zaust
- Zone day release
- Posts: 13007
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Somewhere in Hertfordshire , or press Ctrl + W
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
well done that man

Considering Selling the Cabby, looks like its gonna go
-
zaust
- Zone day release
- Posts: 13007
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Somewhere in Hertfordshire , or press Ctrl + W
Wright The last part turned up to day, So I have been putting it back together again. Only the rad left to secure in place. But I did turn the key and she jumped in to life
.
Will not get a chance to touch it now till next monday, which is when I can run it up for 30min's then re torque the head bolt's and take to have the exhaust mated to the manifold.
All in all a good day.
Will not get a chance to touch it now till next monday, which is when I can run it up for 30min's then re torque the head bolt's and take to have the exhaust mated to the manifold.
All in all a good day.
-
zaust
- Zone day release
- Posts: 13007
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Somewhere in Hertfordshire , or press Ctrl + W
-
gooner1
- Out humping Reindeer
- Posts: 13280
- Joined: Fri Apr 14, 2006 11:00 pm
- Location: Northampton.For my sins.
Post the sound up Marc,your nearly there mate. 

-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
Pics please 

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
ImysE30
- Married to the E30 Zone

- Posts: 22478
- Joined: Mon Jul 07, 2008 11:00 pm
- Location: Derby Massive!!
Pics and Vid please 
Current Fleet:
E30 335i Turbo M3 Convertible Replica
E30 335i Turbo M3 Convertible Replica
-
zaust
- Zone day release
- Posts: 13007
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Somewhere in Hertfordshire , or press Ctrl + W
Will do a sound clip when I work out how to take it from my phone to the pc
But in the mean time i have been looking for an air leak that i could hear but not find.
Un fortunatly i found it yesterday after the exhaust was fitted.
Found a crack in the under side of the inlet manifold...... Pis**d off to say the least.
But in the mean time i have been looking for an air leak that i could hear but not find.
Un fortunatly i found it yesterday after the exhaust was fitted.
Found a crack in the under side of the inlet manifold...... Pis**d off to say the least.
-
ImysE30
- Married to the E30 Zone

- Posts: 22478
- Joined: Mon Jul 07, 2008 11:00 pm
- Location: Derby Massive!!
Bluetooth or USB
Not good news
Not good news
Current Fleet:
E30 335i Turbo M3 Convertible Replica
E30 335i Turbo M3 Convertible Replica
-
zaust
- Zone day release
- Posts: 13007
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Somewhere in Hertfordshire , or press Ctrl + W
-
ImysE30
- Married to the E30 Zone

- Posts: 22478
- Joined: Mon Jul 07, 2008 11:00 pm
- Location: Derby Massive!!
I usually bluetooth my pics and vids. Not sure if it works the same as USB
Current Fleet:
E30 335i Turbo M3 Convertible Replica
E30 335i Turbo M3 Convertible Replica
-
oakey
- E30 Zone Addict

- Posts: 4891
- Joined: Fri Feb 10, 2006 11:00 pm
- Location: Surrey
Is it just a sound clip or a video?

-
gooner1
- Out humping Reindeer
- Posts: 13280
- Joined: Fri Apr 14, 2006 11:00 pm
- Location: Northampton.For my sins.
Feck Marc, just spotted this. I,m really begining to believe this engine is jinxed in some way.
Look at it,s history when i had it, Touring, it was going in, tries to crush me, touring it was going in gets crushed itself. The exhaust manifolds mysteryiously dissapear. The injector rail
gets crushed by my daughter. The injectors i had cleaned, turn out to be fooked. Thats when i had it. Seems to be continuing under your ownership. The air leak you have now, could you here it before the exhaust was fitted, or would it of been too noisy then?
Look at it,s history when i had it, Touring, it was going in, tries to crush me, touring it was going in gets crushed itself. The exhaust manifolds mysteryiously dissapear. The injector rail
gets crushed by my daughter. The injectors i had cleaned, turn out to be fooked. Thats when i had it. Seems to be continuing under your ownership. The air leak you have now, could you here it before the exhaust was fitted, or would it of been too noisy then?

-
zaust
- Zone day release
- Posts: 13007
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Somewhere in Hertfordshire , or press Ctrl + W
Way too noisy, but the drive was fun. 
Rob it is now running lovley (fingers crossed spit spit) Will have a fan that actually cools the rad soon too thanks tho theo, And my new front end has been painted and is on route
Only thing left after that is run it in and wrap it round a post or tree lol
Rob it is now running lovley (fingers crossed spit spit) Will have a fan that actually cools the rad soon too thanks tho theo, And my new front end has been painted and is on route
Only thing left after that is run it in and wrap it round a post or tree lol
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
I don't think you will Zaust, with the amount of rear wheel drive babies you've driven


If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
zaust
- Zone day release
- Posts: 13007
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Somewhere in Hertfordshire , or press Ctrl + W
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
Which ones the m30 in now??? 

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
zaust
- Zone day release
- Posts: 13007
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Somewhere in Hertfordshire , or press Ctrl + W
-
zaust
- Zone day release
- Posts: 13007
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Somewhere in Hertfordshire , or press Ctrl + W
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
How did you mount the elec fan, did you mount it onto the rad itself, or really close, as i think mine is abit too far from the radzaust wrote:All running properly now. New fan work's much better and actully cool's the rad. Just got to fit the new front on next monday and she's ready to drive. Still some snaggin to do but that can be done as and when..
roll on march the first and some tax.

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL


