(feeler) Big brake conversion

[Phill172]

I was a bit unsure of what area to put this in but as its a group buy....!

Right guys the amount of posts I read on the forum about what brakes to upgrade to etc etc....

Spoke to a company who do discs, i bought some for my clio sport ages ago, but basically long story short they can do 4 x 100 Audi TT discs (312mm x 24mm vented for around £108 inc vat....

Based on if i can get enough interest saying around 10 people? There is no limit to the amount of people for the group buy, but aslong as its above 10!

I would like to make this into a whole package, well discs and adaptors, But what i need to do first is to get ones myself, and sort adaptors for standerd calipers and also Brembos.

All i aim for is to make it a damn site cheaper then 300mm.de!

any thoughts/interest?

[DaveD]

if you can do it for 15"wheels ...280mm.. as a package..

[Phill172]

shouldnt be a problem, if i get the interest and get my head round the caliper brackets

[Rik178m]

What wheel sizes would the TT brakes fit/not fit?

[Phill172]

defiently fit 17", unsure about 16's i may be able to squeeze them under my 16" compomotives but will have to find out....

[Rik178m]

If they fit under 16's which I have and am quite fond of then I'm game

[DanThe]

they can do 4 x 100 Audi TT discs (312mm x 24mm vented for around £108 inc vat....

sounds expensive to me, who manufactures the disc?

[tomson]

I might be interested in this as I will be in the market for a brake upgrade in the new year, depends on the cost....

[adil325i]

im interested also - what options are there on caliper?

[Phill172]

The way im working on it is basically Im going to look into the 280mm set up first that saying really shouldnt take to long!

For a 280 set up, i believe, correct me if im wrong the Mazda 4 pots from a RX7 can be used....

Also have been told the 406 coupe/fiat coupe Brembos are all the same, and will accomendate the 312mm discs...
So thats basically what I am aiming to be able to provide disc and cailper adaptors so all you simply have to do is find the calipers

280mm set up, you can get discs for around £50

[Ant]

312mm discs just fit under 16" Borbet B's and Alpina 7Js

the 280mm discs are from a golf G60 iirc.

I'd suggest the brembo 4 pots are a non starter though due to the sheer bulk of the things, 750 sliding single pots require a bit of surface grinding to fit and leave a 4mm gap between wheel and caliper with new pads and discs fitted, thats with wheels of the correct offset btw and no spacer required.

[Gunni]

You can buy the Audi discs with all the bolt holes already from numerous suppliers.

[dcoeinside]

I was a bit unsure of what area to put this in but as its a group buy....!

Right guys the amount of posts I read on the forum about what brakes to upgrade to etc etc....

Spoke to a company who do discs, i bought some for my clio sport ages ago, but basically long story short they can do 4 x 100 Audi TT discs (312mm x 24mm vented for around £108 inc vat....

Based on if i can get enough interest saying around 10 people? There is no limit to the amount of people for the group buy, but aslong as its above 10!

I would like to make this into a whole package, well discs and adaptors, But what i need to do first is to get ones myself, and sort adaptors for standerd calipers and also Brembos.

All i aim for is to make it a damn site cheaper then 300mm.de!

any thoughts/interest?

Hi,

this is the disc you speek about. But....... with 4x100 bolt circle, centerhole for e30 and PowerGroove. !!!
You can have it in:
312x25 / 4x100 or 5x120(no double circle)
300x25 / 4x100 or 5x120(no double circle)

[Demlotcrew]

^ Looks like a ATE Disk to me.

Just buy the brackets from 300mm.de which are TUV approved and get on with it!

Andrew

[Keg_gt]

IM in on this if its still on i have the calipers just need the tt discs and adaptors.

[rhett325i]

I was a bit unsure of what area to put this in but as its a group buy....!

Right guys the amount of posts I read on the forum about what brakes to upgrade to etc etc....

Spoke to a company who do discs, i bought some for my clio sport ages ago, but basically long story short they can do 4 x 100 Audi TT discs (312mm x 24mm vented for around £108 inc vat....

Based on if i can get enough interest saying around 10 people? There is no limit to the amount of people for the group buy, but aslong as its above 10!

I would like to make this into a whole package, well discs and adaptors, But what i need to do first is to get ones myself, and sort adaptors for standerd calipers and also Brembos.

All i aim for is to make it a damn site cheaper then 300mm.de!

any thoughts/interest?

Hi,

this is the disc you speek about. But....... with 4x100 bolt circle, centerhole for e30 and PowerGroove. !!!
You can have it in:
312x25 / 4x100 or 5x120(no double circle)
300x25 / 4x100 or 5x120(no double circle)

do you have a link to where those rotors can be purchased?

[Keg_gt]

this still happening?

[frenchman]

I was a bit unsure of what area to put this in but as its a group buy....!

Right guys the amount of posts I read on the forum about what brakes to upgrade to etc etc....

Spoke to a company who do discs, i bought some for my clio sport ages ago, but basically long story short they can do 4 x 100 Audi TT discs (312mm x 24mm vented for around £108 inc vat....

Based on if i can get enough interest saying around 10 people? There is no limit to the amount of people for the group buy, but aslong as its above 10!

I would like to make this into a whole package, well discs and adaptors, But what i need to do first is to get ones myself, and sort adaptors for standerd calipers and also Brembos.

All i aim for is to make it a damn site cheaper then 300mm.de!

any thoughts/interest?

Hi,

this is the disc you speek about. But....... with 4x100 bolt circle, centerhole for e30 and PowerGroove. !!!
You can have it in:
312x25 / 4x100 or 5x120(no double circle)
300x25 / 4x100 or 5x120(no double circle)

Interesting stuff!

I guess the man who is going to manufacturethe biggest kit for BBS 15" wheels would earn a lot of money!

[Dave_M3]

I was a bit unsure of what area to put this in but as its a group buy....!

Right guys the amount of posts I read on the forum about what brakes to upgrade to etc etc....

Spoke to a company who do discs, i bought some for my clio sport ages ago, but basically long story short they can do 4 x 100 Audi TT discs (312mm x 24mm vented for around £108 inc vat....

Based on if i can get enough interest saying around 10 people? There is no limit to the amount of people for the group buy, but aslong as its above 10!

I would like to make this into a whole package, well discs and adaptors, But what i need to do first is to get ones myself, and sort adaptors for standerd calipers and also Brembos.

All i aim for is to make it a damn site cheaper then 300mm.de!

any thoughts/interest?

Hi,

this is the disc you speek about. But....... with 4x100 bolt circle, centerhole for e30 and PowerGroove. !!!
You can have it in:
312x25 / 4x100 or 5x120(no double circle)
300x25 / 4x100 or 5x120(no double circle)

do you have a link to where those rotors can be purchased?

+ 1

Need to sort discs for my new brakes

[Bob_S]

the 312 will fit under 16" hartge's too

I still think a pair of discs and machining is cheaper..

[miniblob]

they can do 4 x 100 Audi TT discs (312mm x 24mm vented for around £108 inc vat....

Are they genuine audi discs???

I'm sure i've heard (from a reliable source i think, just can't remember who/where!) that the genuine discs are lighter than all the others available, that are 'the same'!!!!

I'm sure the genuine audi discs were more than that from a dealer when i checked last year!!!

If they are genuine, i might be interested in a few months!! Can't commit at the mo though!!

[Dave_M3]

the 312 will fit under 16" hartge's too

I still think a pair of discs and machining is cheaper..

They fit under some 15"s too

[Bob_S]

the 312 will fit under 16" hartge's too

I still think a pair of discs and machining is cheaper..

They fit under some 15"s too

which ones as they are damn tight on 16's?!

[Dave_M3]

the 312 will fit under 16" hartge's too

I still think a pair of discs and machining is cheaper..

They fit under some 15"s too

which ones as they are damn tight on 16's?!

Saw a set of Revolutions on a track car for sale recently and it had Brembos and Audi dics but thinking back now I think they were only 300mm.

[325tourer]

fiat coupe brembos wont fit on 15", 16" as standard have 3mm clearence between alloy and caliper. thats std alloys.

they are 305mm discs with 4x98mm.

ive a fiat coupe aswell as the 325i,2nd hand brembos fetch between £100-£150 and a refurb kit is about £40 for seals etc.

[bene30jane]

will they fit 17", the fiat brembo's? how much are the 312mm discs and adaptors?