im in st neots in cambridge. engine only has straight through exhaust about a foot long at the minute, itl sound better once ive got the exhaust madeDanThe wrote:Sounds like a dumper truck![]()
Where abouts in the country are you?
my e30 3.6 td project proper driving vid with exhaust page 7
Moderator: martauto
-
336tdse
- E30 Zone Newbie

- Posts: 195
- Joined: Tue Oct 28, 2008 11:00 pm
-
336tdse
- E30 Zone Newbie

- Posts: 195
- Joined: Tue Oct 28, 2008 11:00 pm
should be moted early next year hopefullyaj_mckay wrote:Looking forward to seeing this in it's finished state, MOTd and road worthy! Very cool...
-
336tdse
- E30 Zone Newbie

- Posts: 195
- Joined: Tue Oct 28, 2008 11:00 pm
i think a few people defo thought it wouldnt workdjk wrote:Been following this thread from the start, think you've already proven the doubters wrong! Good luck with getting it sorted, I for one want to see this on the road.
-
aj_mckay
- E30 Zone Squatter

- Posts: 1782
- Joined: Sun Nov 11, 2007 11:00 pm
- Location: Winchester
How do you plan to use a front bumper and valence if you get your hands on one? Won't that rad be in the way...?336tdse wrote:parts i do need are drivers front wing, drivers wing mirror, rear bumper, front bumper and front valance.
-
336tdse
- E30 Zone Newbie

- Posts: 195
- Joined: Tue Oct 28, 2008 11:00 pm
i want to make my own front end eventually but for now just wana fit valance and bumper and just cut centre out where rad is. then have some mesh or a grill to cover the rad.aj_mckay wrote:How do you plan to use a front bumper and valence if you get your hands on one? Won't that rad be in the way...?336tdse wrote:parts i do need are drivers front wing, drivers wing mirror, rear bumper, front bumper and front valance.
-
town325i
- E30 Zone Team Member

- Posts: 7050
- Joined: Thu Jun 26, 2008 11:00 pm
- Location: cannock staffordshire
i cant wait to see what this looks like when its done (not in a horrible way) it will just look anti social

-
Ziggy
- E30 Zone Team Member

- Posts: 11534
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: floating round my tin can...
That sounds awesome! 
E30 in need of wiring loom smoke since April '11...
-
aj_mckay
- E30 Zone Squatter

- Posts: 1782
- Joined: Sun Nov 11, 2007 11:00 pm
- Location: Winchester
town325i wrote:i cant wait to see what this looks like when its done (not in a horrible way) it will just look anti social
-
MarkF
- E30 Zone Regular

- Posts: 493
- Joined: Thu Mar 13, 2008 11:00 pm
- Location: Sittingbourne, Kent
Rediculously oversized, unusual engines FTW!!!
Cant wait to see this finished

Cant wait to see this finished
-
336tdse
- E30 Zone Newbie

- Posts: 195
- Joined: Tue Oct 28, 2008 11:00 pm
got vac pipe for brake servo and power steering pipes sorted tonight. running range rover v8 steering pump. picked up a belt on the way home so should be sorted tmrw. got a push switch wired into the cab for glow plugs, starts much better now it has 6 new glow plugs working, only had 2 before
i wana run an intercooler but im rapidly running out of room, cant put one on the front of the rad as its gonna stick out to far.
i wana run an intercooler but im rapidly running out of room, cant put one on the front of the rad as its gonna stick out to far.
-
marcp1987
- E30 Zone Newbie

- Posts: 130
- Joined: Thu Apr 26, 2007 11:00 pm
Thats wicked! Understand now what you mean about the noise that engine made!
Im only in Peterborough, run up to see my mate in cambridge alot, will have to look out for you!
Im only in Peterborough, run up to see my mate in cambridge alot, will have to look out for you!
-
robbo86
- E30 Zone Addict

- Posts: 3758
- Joined: Fri Jun 15, 2007 11:00 pm
- Location: planet thanet
Keep an ear out, you will hear him coming first!!!will have to look out for you
Proud member of the PARDON? club!
-
336tdse
- E30 Zone Newbie

- Posts: 195
- Joined: Tue Oct 28, 2008 11:00 pm
got spring assistors in tonight. about 4" clearance now and much firmer itl do for a bit of testing. power steering ready to try. heater pipes fitted. im hopefully gonna make the exhaust up saturday morning then give it a drive
will have brakes now too as the servo vac pipe is on.
-
robbo86
- E30 Zone Addict

- Posts: 3758
- Joined: Fri Jun 15, 2007 11:00 pm
- Location: planet thanet
After this crazyness, wanna do my m40 to m42. Should take you about 1 minute of head scratching and 3 minutes of spannering in comparison!
Proud member of the PARDON? club!
-
Felix79
- All loved up !
- Posts: 5134
- Joined: Sat May 24, 2008 11:00 pm
- Location: Hereford
My hat goes off to you for achiving that.
Felix79 aka Dan
If you got haters, then your doing something right!
E85 Z4M Roadster
If you got haters, then your doing something right!
E85 Z4M Roadster
-
Rosc0PColtrane
- Married to the E30 Zone

- Posts: 9757
- Joined: Tue Mar 01, 2005 11:00 pm
- Location: With Ceiling cat, watching you masturbate.
hahahaha sounds great!! Nice work!
-
ImysE30
- Married to the E30 Zone

- Posts: 22478
- Joined: Mon Jul 07, 2008 11:00 pm
- Location: Derby Massive!!
Sounds awesome, great work 
Current Fleet:
E30 335i Turbo M3 Convertible Replica
E30 335i Turbo M3 Convertible Replica
-
336tdse
- E30 Zone Newbie

- Posts: 195
- Joined: Tue Oct 28, 2008 11:00 pm
got steering working after pipe blowing off had to make a union. got cone air filter fitted. havnt got room for header tank so gonna use bmw one just needs a 2 into 1 bleed pipe fitting as bmw header tank only has 1 inlet.
-
336tdse
- E30 Zone Newbie

- Posts: 195
- Joined: Tue Oct 28, 2008 11:00 pm
got exhaust downpipe done tonight 5 joints already
if all goes to plan wil have a proper vid of it driving tmrw 
-
BreadBin
- E30 Zone Regular

- Posts: 256
- Joined: Sun Jan 15, 2006 11:00 pm
I was trying to think of helpful suggestions for the intercooler but that monster will need something pretty large I'd imagine?
Humph
-
336tdse
- E30 Zone Newbie

- Posts: 195
- Joined: Tue Oct 28, 2008 11:00 pm
well got exhaust done. was a nightmare though im gonna get a new welder mine is crap, one minute wire feeds ok then jumps
got a vid of me driving it too
uploading to youtube now
few pics of exhaust, mixture of range rover pipe, vm flange, rs turbo pipe and rs turbo back box.





few pics of exhaust, mixture of range rover pipe, vm flange, rs turbo pipe and rs turbo back box.





-
336tdse
- E30 Zone Newbie

- Posts: 195
- Joined: Tue Oct 28, 2008 11:00 pm
doesnt run one as standard but if i tune it will need one, il make room if needs beBreadBin wrote:I was trying to think of helpful suggestions for the intercooler but that monster will need something pretty large I'd imagine?
-
336tdse
- E30 Zone Newbie

- Posts: 195
- Joined: Tue Oct 28, 2008 11:00 pm
in car vid
ignore the grinding noise when im braking alternator is just catching front panel under braking
i got 55 mph up the farm roadway and had to brake well early cause of alternator rubbing
and suffering loads of wheelspin
i got 55 mph up the farm roadway and had to brake well early cause of alternator rubbing
Last edited by 336tdse on Sat Nov 29, 2008 9:15 pm, edited 1 time in total.
-
johnl320
- E30 Zone Addict

- Posts: 3124
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Hampshire
Fantastic, love the way you can year that turbo spooling up when you pull away. 
-
336tdse
- E30 Zone Newbie

- Posts: 195
- Joined: Tue Oct 28, 2008 11:00 pm
me love it toojohnl320 wrote:Fantastic, love the way you can year that turbo spooling up when you pull away.
should be pretty quick once the proper diff is in i reckon.
-
Felix79
- All loved up !
- Posts: 5134
- Joined: Sat May 24, 2008 11:00 pm
- Location: Hereford
IT LIVES IT LIVES!
Felix79 aka Dan
If you got haters, then your doing something right!
E85 Z4M Roadster
If you got haters, then your doing something right!
E85 Z4M Roadster
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
Well done, love to see that thing in the flesh, how you going to put the front on as the rad looks too far out??? 

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
336tdse
- E30 Zone Newbie

- Posts: 195
- Joined: Tue Oct 28, 2008 11:00 pm
wana make a custom front end eventually but for now im just gonna cut out where rad sits and use standard stuff once i get it.Rav335uk wrote:Well done, love to see that thing in the flesh, how you going to put the front on as the rad looks too far out???
-
cool_ram_in
- E30 Zone Newbie

- Posts: 87
- Joined: Mon Jun 23, 2008 11:00 pm
Great stuff!
that´s one strange conversion, but it´s running just fine!
Keep us posted on the progress!
:thumbs:
that´s one strange conversion, but it´s running just fine!
Keep us posted on the progress!
:thumbs:
-
336tdse
- E30 Zone Newbie

- Posts: 195
- Joined: Tue Oct 28, 2008 11:00 pm
cool_ram_in wrote:Great stuff!
that´s one strange conversion, but it´s running just fine!
Keep us posted on the progress!
:thumbs:
will do
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Theres one thing for sure, it sounds better than the average diesel 
-
336tdse
- E30 Zone Newbie

- Posts: 195
- Joined: Tue Oct 28, 2008 11:00 pm
ive got an e36 325 tds and the e30 vm soundtrack is much better for meDanThe wrote:Theres one thing for sure, it sounds better than the average diesel
my e30 3.6 tdse project thread
http://www.e30zone.net/modules.php?name ... c&t=117100
http://www.e30zone.net/modules.php?name ... c&t=117100
-
336tdse
- E30 Zone Newbie

- Posts: 195
- Joined: Tue Oct 28, 2008 11:00 pm
well think the alternator rubbing is sorted got a good 10mm gap now. header tank is on. engine has had no oil feed to the rockers til today as i only just noticed feed is external and had been bunged off ! all sorted now though
bonnet is resting in place about 2" to high but only seems to be hiting header tank cap and top hose so i think reclocated top hose and a hole in the bonnet for header tank cap and bonnet should be within 1/2" of original position
bonnet is resting in place about 2" to high but only seems to be hiting header tank cap and top hose so i think reclocated top hose and a hole in the bonnet for header tank cap and bonnet should be within 1/2" of original position
my e30 3.6 tdse project thread
http://www.e30zone.net/modules.php?name ... c&t=117100
http://www.e30zone.net/modules.php?name ... c&t=117100
-
336tdse
- E30 Zone Newbie

- Posts: 195
- Joined: Tue Oct 28, 2008 11:00 pm


my e30 3.6 tdse project thread
http://www.e30zone.net/modules.php?name ... c&t=117100
http://www.e30zone.net/modules.php?name ... c&t=117100
-
336tdse
- E30 Zone Newbie

- Posts: 195
- Joined: Tue Oct 28, 2008 11:00 pm
header tank is done and bonnet is done
bonnet runs on th original rollers at the back then just 2 blots hlod it down at the front
just need a vent now for the hole where header tank cap is










my e30 3.6 tdse project thread
http://www.e30zone.net/modules.php?name ... c&t=117100
http://www.e30zone.net/modules.php?name ... c&t=117100
