Not far off now. Help !!!

[zaust]

In the pic below. There is the power wire that come's off the relocation kit,
It is laying up the windscreen for the perpose of the pic.

Do I need to connect this to the starter motor, Or is the one I connected off the loom near where the loom feed's through the bulk head doing the same job ? , As down by the starter there is wire's that match the starter.

[Jhonno]

there should be a 2 lives to the starter.. one throws the pinion out the other turns the motor

[zaust]

There is three on there now. This seem's to be an extra. Will take a pic tomorrow. Will make more sence.

Cheer's anyway.

[Demlotcrew]

That cable provides the Starter with extra current to turn over that Massive and Heavy engine!

[zaust]

LOL

SO don't use it then ???

[zaust]

Had her turning over a coulpe fo times. Then nothing.
Now I think the starter has packed up.

If I put a cable on the earth of the starter and to the body, then i'm getting a click from the solinoid but nought happening. (have tried a hammer + jump off another car for a stronger bolt to)

Dose some one have a wireing diag for the starter or look at there's and tell me what's where please, So I can make sure i'm all on correct.


Cheer's in advance

[HartgeH27]

http://www.autolib.diakom.ru/CAR/BMW/19 ... 0DIAGRAMS/

[zaust]

Ok, Same colours same places.

Thank's.