i want more power out of my 318

Need technical Q/A then you're in the right place

Moderator: martauto

Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22666
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Thu Oct 30, 2008 7:59 pm

fuzzy wrote:
Alex wrote:
78dude wrote:A lot of ppl are thinking very often that the only way to get a car to go fast is a big engine!
Is that always the case?

First of all, to make a fast car, you need to have a fast driver behind the wheel, and you need to have a car you trust in hi speeds, that makes you to first think that upgrade the suspension is a vise idea...
And yes it is! Upgrade your 318i with some better shocks, springs and brakes is my advice into this, then you upgrade the engine. Im on a Alfa Romeo forum too, and the ppl there are so much better to talk about road handling than a big engine under the hood.

Before you start to tune a car, you should first take it to a tuning shop who have a dyno so you could check up how much power you have, and from there start to twist more horses out of the engine.
+1

its 6 pot owners who seem to think that putting a begger engine in will solve all problems :wink: :teehee:
i threw away my 6 pot for a much more powerful and smaller 4 pot.
there is replacement for displacement.... a turbo :teehee:
1an
E30 Zone Addict
E30 Zone Addict
Posts: 2384
Joined: Sat Oct 28, 2006 11:00 pm
Location: benfleet, essex

Thu Oct 30, 2008 10:32 pm

ive now ownd several e30's,

my 316i which i did all the suspension work to and left the engine standard was great fun could drive it with confidence quickly throug hthe twisties,

my 318is in my opinon not all they were raved up to be, had to drive it hard to move it,

a 320i was nice to have the torque but was a slug to drive.

and now i have a 325i its the best i have driven, dont notice that much difference up front, and the power and torque is great. and when i transfer all the polybushes over on to it, ill have the confidence to push on harder through the bends, plus you cant beat a 2.5 with a slipper :D

so in my opinion chuck a 2.5 engine in it for tops of 500 worst case which will give somewhere near 170bhp, and there is no way youll get thta power from a 318 without forced induction or lots of n/a tunning.
Image

Audi S3 and Racing Puma track car.
Andyboy
Alpina Colada
Posts: 12576
Joined: Mon Sep 11, 2006 11:00 pm

Fri Oct 31, 2008 11:58 am

I have an M50 2.5 engine and box............ :D
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!
Contact:

Fri Oct 31, 2008 12:07 pm

Andyboy wrote:I have an M50 2.5 engine and box............ :D
Win..
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
User avatar
toby
E30 Zone Addict
E30 Zone Addict
Posts: 3609
Joined: Thu Aug 11, 2005 11:00 pm
Location: Kent

Sun Nov 02, 2008 9:34 am

Alex wrote:
toby wrote:Is it on a carb at the moment?
it says, 318i
Does it?

The title says 318 not 318i. Which made me think it might be a 1.8 316.
Image
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22666
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Sun Nov 02, 2008 12:43 pm

hello all

I am new to E30's and have just got a nice 1986 318 i like the car but at the mo it is standard as standard can be !!!

i want to get more power out of the car and dont know where to start?...

if someone could help me out with a list of good mods that dont brake the bank to much and a good place to order parts from please?


if someone could help me out with this it would help me out alot!!!

cheers
318i :wink: i know what you mean tho sometimes people call 316's 318's
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22666
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Sun Nov 02, 2008 12:44 pm

just relised the I bit aint actually part of the 318 :mad: could be either then :P
Post Reply