are these still available when is the cut off date?
thanks
Lee
Group buy - 318is or Rieger front spoiler 'add on' splitters
Moderator: martauto
Fecking Paypal is giving me problems again and I'm in Spain now so can't sort it 
If this is still going when I get back and it sorted out, I'd take an iS one
If this is still going when I get back and it sorted out, I'd take an iS one
M42 rightness above 6500rpm, nobody can hear you scream
I was hoping to get 6, I have got three definate so far, Dan is sending a cheque this week so if Scot pulls out then you could take his spot.essexboy wrote:are these still available when is the cut off date?
thanks
Lee
I might get 8 if your seriously intrested? (As they are coming over in two boxes Ill work in even numbers / mild Ocd)
Cut off date is when everyones paid
Its only the 'extension' its self Dips which bolts up underneath not the full front spoiler...dips346 wrote:when do you think you will get them by and how much for the reiger item with the smaller lip bit
Just waiting for payment the about 2 weeks from that date after funds are cleared.
OBs
For those involved, Im still waiting for payment off a couple more but have been in contact with them 
$ to the £ looks sh!te at the moment, hopefully it dosnt drop any further when it comes to ordering.
Cheers
OBs
$ to the £ looks sh!te at the moment, hopefully it dosnt drop any further when it comes to ordering.
Cheers
OBs
-
leftcoaste30
- E30 Zone Newbie
- Posts: 30
- Joined: Tue Oct 10, 2006 11:00 pm
- Location: Seattle, WA
Figured I'd stop by and say what's up. I'm Brendan, and I'm the one who's over in the US building these splitters. OBs said he had a few guys who wanted and I stumbled upon this thread. OBs has it all covered and did great with this, but figured if any of you have questions about the material or anything like that, let me know. Also, feel free if you can get a group of 6 together any time, I'll honor the price I'm getting OBs. So if you miss this one, feel free to let me know and we can work something out. Great site by the way. Used to check it out when I was gonna m30 swap my e30, but haven't since I went m50. I've got more pictures if you guys want them of how the fitment is.
-
leftcoaste30
- E30 Zone Newbie
- Posts: 30
- Joined: Tue Oct 10, 2006 11:00 pm
- Location: Seattle, WA
The one's on the front page up top are actually different splitters. Mine are a thicker material and actually cover the underside all the way around the sides.
-
leftcoaste30
- E30 Zone Newbie
- Posts: 30
- Joined: Tue Oct 10, 2006 11:00 pm
- Location: Seattle, WA
No worries, just waitin patiently, gonna go get material soon as funds are transfered. Also, you outta change the 2 pics of the splitters on the front page, those aren't mine and I don't wanna have to deal w/ stuff from the person who shall remain nameless which they belong to.OBs wrote:Hi Brendan, Thanks for putting the pictures up buddy
Will contact you as soon as funds are recieved
Take care mate
OBs
'G' That would be bad Brendanleftcoaste30 wrote:No worries, just waitin patiently, gonna go get material soon as funds are transfered. Also, you outta change the 2 pics of the splitters on the front page, those aren't mine and I don't wanna have to deal w/ stuff from the person who shall remain nameless which they belong to.
Edited
-
leftcoaste30
- E30 Zone Newbie
- Posts: 30
- Joined: Tue Oct 10, 2006 11:00 pm
- Location: Seattle, WA
Thanks
-
leftcoaste30
- E30 Zone Newbie
- Posts: 30
- Joined: Tue Oct 10, 2006 11:00 pm
- Location: Seattle, WA
If its ok with OBS its fine w/ me if you guys have over 6. I can cram them into boxes and make it work if you want. Shipping will odviously be like 10 more dollars than the other box because of more weight, but I can do more than 6. Also, that picture is a 1.5" lip.
1. OBs - 1" (is) ~ Paid
2. Dan325iSport - 1" (is) x 2 ~ Paid (Cheque)
4. 5. Henry_IS - 1" (is) ~ Paid
5. Magpie - 1" (is) ~ Paid
6. Essexboy - 1.5" (Rieger) ~ Paid
2. Dan325iSport - 1" (is) x 2 ~ Paid (Cheque)
4. 5. Henry_IS - 1" (is) ~ Paid
5. Magpie - 1" (is) ~ Paid
6. Essexboy - 1.5" (Rieger) ~ Paid
Last edited by OBs on Fri Nov 07, 2008 7:41 pm, edited 3 times in total.
I've just managed to get hold of Scot (Player6) at last, he can't go for one in this group buy . Take his name off the list please OBS. Feeling slightly embarrassed now.
. Take his name off the list please OBS. Feeling slightly embarrassed now.
-
leftcoaste30
- E30 Zone Newbie
- Posts: 30
- Joined: Tue Oct 10, 2006 11:00 pm
- Location: Seattle, WA
Sweet. Just got and sent back a reply to OBs about payment and all of those ugly details. So here's my deal. I can't get my order in until monday for material, so I'm gonna get that order in as soon as possible and see if they off chance have any in stock. Otherwise next wednesday I'll have material in my hands and ready to go. Sadly I'm in college and have 4 tests next week, so it will be next weekend I'll sit down and get them done most likely, if not I'll have 1 or so left so the big chunk will be done. So basically expect them to be on their way to your side of the pond around the 16th. Sorry if that's slow for anyone, college is a real downer in terms of time.
Also, huge thanks to you all, I'm actually applying for my business lisense soon and going to start a little side company doing the splitters for now because of the huge response I've had from you guys as well as the spece30 racers in the US, and hoping to after college turn it as well as more fabrication into a career. By the way the name will most likely be Speed Fabrication. So again, huge thanks to OBs for organizing this, he said over on r3v he had friends who were interested, now I know its this forum so I'll for sure link any group buys i do in future over to here for anyone else who is interested but can't quite yet.
Also, huge thanks to you all, I'm actually applying for my business lisense soon and going to start a little side company doing the splitters for now because of the huge response I've had from you guys as well as the spece30 racers in the US, and hoping to after college turn it as well as more fabrication into a career. By the way the name will most likely be Speed Fabrication. So again, huge thanks to OBs for organizing this, he said over on r3v he had friends who were interested, now I know its this forum so I'll for sure link any group buys i do in future over to here for anyone else who is interested but can't quite yet.
1. OBs - 1" (is) ~ Paid
2. Dan325iSport - 1" (is) x 2 ~ Paid
4. 5. Henry_IS - 1" (is) ~ Paid
5. Magpie - 1" (is) ~ Paid
6. Essexboy - 1.5" (Rieger) ~ Paid
PM received Dan, sorry everyone Ive been mucho busieo the last few days
We have our 6 so the group buy is in motion
Cheers guys
OBs
2. Dan325iSport - 1" (is) x 2 ~ Paid
4. 5. Henry_IS - 1" (is) ~ Paid
5. Magpie - 1" (is) ~ Paid
6. Essexboy - 1.5" (Rieger) ~ Paid
PM received Dan, sorry everyone Ive been mucho busieo the last few days
We have our 6 so the group buy is in motion
Cheers guys
OBs
magpie wrote:cheers obs great coms/ deal/ the nuts mucho gracioo
Pleasure, I was meaning to pop on and reassure you guys the rumors are not true, I haven't fled with my 'winnings' and got my self a cosy little bedsit up Brixton with a hefty crack habit
As Brendan said he is pretty tied up with College but will soldier on with them asap
-
leftcoaste30
- E30 Zone Newbie
- Posts: 30
- Joined: Tue Oct 10, 2006 11:00 pm
- Location: Seattle, WA
Its a blessing and a curse...magpie wrote:an e30 habit is enough on it's own
lol-
leftcoaste30
- E30 Zone Newbie
- Posts: 30
- Joined: Tue Oct 10, 2006 11:00 pm
- Location: Seattle, WA
Sorry I haven't updated in a bit. Material is all here and getting them cut out in rough shape. Hoping to be to the point where I can get them all perfected friday so package them over the weekend and ship them monday. That's how I'm hoping it'll go. Somewhere int here on saturday though I've gotta get an e36 running on megasquirt w/ a freshly rebuilt turbo motor. Should be fun, hopefully won't take long so I can get these all perfect.