e36 m44 lumpy idle

Discuss Non-E30 BMW's in here - No selling!

Moderator: martauto

Post Reply
town325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 7050
Joined: Thu Jun 26, 2008 11:00 pm
Location: cannock staffordshire

Sun Oct 05, 2008 5:15 pm

this problem has just started and it happens when the car is cold and at running temp ive ordered new inlet gaskets as they are only pence so im going to change them first
Image
Jeepster
E30 Zone Newbie
E30 Zone Newbie
Posts: 203
Joined: Tue Jan 16, 2007 11:00 pm

Mon Oct 06, 2008 9:06 am

Common for the boot between the maf and the inlet to crack, worth a check.
Image
town325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 7050
Joined: Thu Jun 26, 2008 11:00 pm
Location: cannock staffordshire

Mon Oct 06, 2008 10:49 am

ive replaced this as matter of cause allready when i changed the crank sensor
Image
Jeepster
E30 Zone Newbie
E30 Zone Newbie
Posts: 203
Joined: Tue Jan 16, 2007 11:00 pm

Mon Oct 06, 2008 10:53 am

You haven't just changed the plugs or anything have you? ICV is always worth a check too.
Image
town325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 7050
Joined: Thu Jun 26, 2008 11:00 pm
Location: cannock staffordshire

Mon Oct 06, 2008 10:55 am

i serviced it in january with genuine parts because they were cheaper than pattern parts. where is the icv hidden on these and can you take them apart to clean them out?
Image
town325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 7050
Joined: Thu Jun 26, 2008 11:00 pm
Location: cannock staffordshire

Mon Oct 06, 2008 3:43 pm

found the problem broken oil breather pipe by the bulkhead
Image
Jeepster
E30 Zone Newbie
E30 Zone Newbie
Posts: 203
Joined: Tue Jan 16, 2007 11:00 pm

Mon Oct 06, 2008 5:02 pm

AHH good work.
Image
town325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 7050
Joined: Thu Jun 26, 2008 11:00 pm
Location: cannock staffordshire

Tue Oct 07, 2008 12:10 am

now all ive got to do is get a water pump pully and fit that after i broke it trying to get the viscus fan off that some coont had lock tighted on
Image
Post Reply