how do i convert my 325i sport to 5 stud hus?

[steve_k]

hi guys
this has propably been posted before but here goes
i'm looking at converting my 325i sport hubs to a five stud/bolt hub & i was just trying to find out wot parts i'll need & how hard it is to do
i really hope you guys can help cuz this is really getting on my nerves not knowing how to go about it
thanks in advance for any help & advice you guys can give me
cheers steve

[curryp]

Try m3 parts mate.could be expensive though.

iv got e36 m3 front hubs and brakes on my e30 but you will need m3 evo control arms and offset bushes.also you can use the rear setup off a e36 318ti compact.they are nigh on identical and bolt staight up.

[jaistanley]

You could buy my complete M3 suspension set up and 15" BBS M3 wheels... One bolt on sollution.

[antony]

There's a few options.
Here's another: http://www.ubersaloons.co.nz/uber3/5lug.htm

[antony]

Double post

[steve_k]

thanks for that guys
hey antony that link is pretty helpfull i'll print it off ready for when i get the parts together,
thanks again when(if) i nget round to doing it i'll try to get some photo's up of the convertion as i'm doing it
cheers guys steve