scuttle panel

Post Sat Sep 13, 2008 11:40 am

Just a quickie before you vanish,are these LHD/RHD specific?Do they include the upper column bracket,please?

Post Sat Sep 13, 2008 12:34 pm

the scuttle panel is LHD/RHD specific but this is jut the part you see at bottom of windscreen.

Do you mean the bulkhead panel?

Post Sat Sep 13, 2008 1:10 pm

Paul,I have been daft enough to buy an engineless LHD touring to convert to RHD,so I need the steering column mounts and pedal box mounts...not sure if it is scuttle or bulkhead that I would need....

Post Sat Sep 13, 2008 1:13 pm

You dont need the scuttle, this just sits below the windscreen and is a narrow'ish strip.

The bulkhead shouldnt need modifying with a new panel should it? I thought there was a bung or hole that could be pushed out for the steering collumn. I might be wrong though.

Post Sat Sep 13, 2008 1:20 pm

bmwe30mtech wrote:You dont need the scuttle, this just sits below the windscreen and is a narrow'ish strip.

The bulkhead shouldnt need modifying with a new panel should it? I thought there was a bung or hole that could be pushed out for the steering collumn. I might be wrong though.

No mounts for the pedals

seems to be the main snag,the steering column upper bracket may be easier with a new bit and I have found the hole

for the lower end.

Post Mon Sep 15, 2008 10:36 am

Thanks for the PM,Paul...back to the drawing board...

Post Mon Sep 15, 2008 11:01 am

daimlerman wrote:Thanks for the PM,Paul...back to the drawing board...

Track it