thanx for your attention...help stuck on 325i or 327i ?
Moderator: martauto
-
junkman
- E30 Zone Newbie
- Posts: 142
- Joined: Mon Apr 02, 2007 11:00 pm
- Location: famagusta cyprus
ok boys here it is, doing a conversion on my 320i, replacement engine suggested by my mechanic 2.7 block 81 mm crank 83.98mm bore the stroke i have no idea, with 2.5 head and intake... what i'm confused about is which would be more powerfull the 325i or the 2.7 conversion...pls any suggestions and advice will be considered as most valued last min help.
because we never grow up
and
not a lot of people know that
and
not a lot of people know that
-
charlE30
- E30 Zone Addict
- Posts: 3818
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Warwick
2.7 is the way forward for more power and torque 
Have you read through this? http://www.e30zone.net/e30zonewiki/inde ... ding_a_2.7
Have you read through this? http://www.e30zone.net/e30zonewiki/inde ... ding_a_2.7BMW E30 344i track car 
BMW F31 335d xdrive
BMW F31 335d xdrive
-
oakey
- E30 Zone Addict
- Posts: 4891
- Joined: Fri Feb 10, 2006 11:00 pm
- Location: Surrey
A good 2.7 can have 50bhp and 50 ftlb more than a standard 2.5 
-
junkman
- E30 Zone Newbie
- Posts: 142
- Joined: Mon Apr 02, 2007 11:00 pm
- Location: famagusta cyprus
thank you for all replies will proceed as suggested by my mechanic.
because we never grow up
and
not a lot of people know that
and
not a lot of people know that
-
junkman
- E30 Zone Newbie
- Posts: 142
- Joined: Mon Apr 02, 2007 11:00 pm
- Location: famagusta cyprus
i've found the link very helpfull thank youcharlE30 wrote:2.7 is the way forward for more power and torque
because we never grow up
and
not a lot of people know that
and
not a lot of people know that