chipping 318is

Discuss general engine, turbo and supercharger conversions in this section

Moderator: martauto

Post Reply
e30Alex
E30 Zone Newbie
E30 Zone Newbie
Posts: 196
Joined: Wed Feb 07, 2007 11:00 pm
Location: Southport

Sun Aug 03, 2008 11:00 pm

Is there any point to chipping a 318is? If so what are the likely gains/costs etc? Thankyou Alex
Im a two car man. Shame my bike gets used more.Damn the MOT!
User avatar
hoshy
E30 Zone Wiki Guru
E30 Zone Wiki Guru
Posts: 4118
Joined: Tue Jan 18, 2005 11:00 pm
Location: Munich

Sun Aug 03, 2008 11:33 pm

cheap. worth it. don't get caught up in a few bhp here and there - a chip isn't about peak power boost. it's drivability. the power will come in a bit earlier. usually you get a few extra rpms on the limit which is nice also as it gets you to 62 in 2nd gear :)
E46 M3 CSL but dreaming of another E30.
e30Alex
E30 Zone Newbie
E30 Zone Newbie
Posts: 196
Joined: Wed Feb 07, 2007 11:00 pm
Location: Southport

Sun Aug 03, 2008 11:42 pm

nice point - 58mph in 2nd really does my head in. When you say cheap what are we talking? Can I fit it with my limited electronic skills? Do you know any prefered suppliers? Thanks Alex
Im a two car man. Shame my bike gets used more.Damn the MOT!
tomtomiS
E30 Zone Camper
E30 Zone Camper
Posts: 1216
Joined: Sun Aug 21, 2005 11:00 pm
Location: Cricket Hill, Yateley

Sun Aug 03, 2008 11:49 pm

its really easy to fit, you can do it in about half hour not breaking a sweat,
User avatar
hoshy
E30 Zone Wiki Guru
E30 Zone Wiki Guru
Posts: 4118
Joined: Tue Jan 18, 2005 11:00 pm
Location: Munich

Sun Aug 03, 2008 11:58 pm

fitting is easy for all but the completely inept :)

4x10mm nuts hold the ecu under the dash, drivers side. a few torx bits and some bend over metal tabs hold the cover on. Chip is easily identifiable, 28pins and pushed in to a socket, usually with a silver label on it. Ease it out very gently with a flat-blade screwdriver - take your time with it working one end then the nexxt, and make a note of which way around the chip goes. there is a notch at one end of the chip. then just take the new chip and ensure the pins line up. it takes a little time to ensure all the pins are lined up before pushing it in firmly. again, take your time with it.

A common supplier on the zone is evo-s - you can click the Evolve link at the top of the site. There's also a guy called Jayson from "chippped uk" who sells them. I think BBR and Superchips also have offerings.
E46 M3 CSL but dreaming of another E30.
Post Reply