hi guys
i have blown my headgasket on my m20 325i turbo last nite and im in need of repalcing it
i wanna go mls way but dont know which one to go for
im running 10psi on a t34 turbo with standard internals
i have the later type m20 with the low comp block.
will be going holset in the future.
thanks guys
hass
which mls gasket for me
Moderator: martauto
-
Colonel Sanders
- Le Surrender Monkey.
- Posts: 1296
- Joined: Mon Aug 07, 2006 11:00 pm
- Location: guernsey.... i mean france munching on garlic and drinking wine with my children.
i have a .120 mls gasket for sale, it has been fitted but never started the motor with it, cost me £150, it takes the compresion down to around 8.0cr, make me an offer if you want it?
-
march109
- Engaged to the E30 Zone
- Posts: 6632
- Joined: Sun Aug 20, 2006 11:00 pm
- Location: Bournemouth
The CR depends whether OP has decked his block or had his head skimmed already.
325i Tech 1 Touring, breaking.
2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
-
hass
- E30 Zone Regular
- Posts: 421
- Joined: Sat Jul 16, 2005 11:00 pm
- Location: north london
wont i need longer bolts with the .120 mls
-
Colonel Sanders
- Le Surrender Monkey.
- Posts: 1296
- Joined: Mon Aug 07, 2006 11:00 pm
- Location: guernsey.... i mean france munching on garlic and drinking wine with my children.
not sure mate i used arp bolts, the only reason i took it out was i got bored and decide to rebuild the whole motor and oring and weld the head so i can use a standard gasket.