Evo / DTM Type Hood Seals

Mon Jun 02, 2008 8:22 pm

Would there be any interest in a group buy here for these?

So far we only ship in the USA but If there is enough interest we will work something out.

We have it made in small runs of specially formulated EDPM in order to suit the conditions IE heat, UV, oil resistance etc. the reason being was that the OE product would harden and cause hood closing issues and also the rubber would degenerate rapidly and the off the shelf products were just as bad.

Entwicklung DreiÃŸig Zen II E30 HOOD SEALS are constructed in the USA from 100% High performance EPDM rubber. The seals fit between the hood and the fender. This seal completely covers / seals the space between the hood and the fender for better aerodynamics. [/FONT]

Trunk Seal Images

Here are some larger images of the hood seals

BMW E30 Performance Chassis Specialists

Mon Jun 02, 2008 10:19 pm

I'd be interested in a set of both.

Tue Jun 03, 2008 4:06 am

Possibly the hood seals depending on price!!!

What sort of cost would we be looking at and how many people would be required to get a good price??

Wed Jun 04, 2008 9:52 pm

Hmmmm....hood seals would be worth a look

as above ....Price!!

Wed Jun 04, 2008 10:44 pm

interested dpending on price for bonnet/hood ones.

Wed Jun 04, 2008 10:48 pm

Same as the above's! But intrested in bonnet ones.

Wed Jun 04, 2008 11:31 pm

they are $46 each on his site plus shipping...trunk ones for me

Fri Jun 06, 2008 5:04 am

I assume everyone is here from the UK, what if one of you looks into postage cost from here to the UK. The shipping weight is about one Lbs each set (Hood and Trunk (bonnnet and boot))

I could send one shipment to one of you and you could distribute them?

Here is an example of a group buy on these combination boot and bonnet kits:
http://www.r3vlimited.com/board/showthread.php?t=109023

Fri Jun 06, 2008 8:36 am

How much to ship to here each, or both, individually and how much for 10+ as the other thread on r3vl + how much discount would a bulk buy give us

Fri Jun 06, 2008 7:44 pm

DaveD wrote:How much to ship to here each, or both, individually and how much for 10+ as the other thread on r3vl + how much discount would a bulk buy give us

I will do 10+ Boot and Bonnet kits for $62 US per kit shipped in bulk to one address.

I wouldn't really want to deal with shipping each individually (

customs paperwork gives me brain damage...Or at the very least make the damage I already have worse)

Fri Jun 06, 2008 7:58 pm

its a good price folks the front evo ones from the stealers are £30 =

but who wants to organise it..................

by the way does that include the shipping costs?

Fri Jun 06, 2008 8:08 pm

Im in if we get someone to organise it

1. Eko

Fri Jun 06, 2008 8:23 pm

ditto... but I only want the trunk seal...if someone wants a bonnet only?

1. Eko
2 Daved (trunk only)

Fri Jun 06, 2008 9:42 pm

DaveD wrote:ditto... but I only want the trunk seal...if someone wants a bonnet only?

1. Eko
2 Daved (trunk only)

Dave Benjy has got a touring so boot is no good to him anyway.

Fri Jun 06, 2008 10:20 pm

Yep, I'll take a bonnet set. Cheers

Fri Jun 06, 2008 11:26 pm

I'll try organise something similar to Ireland like we were talking about on R3v

Sat Jun 07, 2008 12:03 am

1. Eko
2 Daved (trunk only)
2Benjy (Bonnet only)

Sat Jun 07, 2008 12:09 am

1. Eko (full kit)
2 Daved (trunk only)
2Benjy (Bonnet only)

Sun Jun 08, 2008 9:54 am

1. Eko (full kit)
2. Daved (trunk only)
3. Benjy (Bonnet only)
4. Aziz (Full Kit)

Mon Jun 09, 2008 3:37 am

You can reach me here: daniel_colegrove@sbcglobal.net

or form mail me from the site: http://www.bmwzenperformance.com/contact.html

Thu Jun 12, 2008 9:13 am

1. Eko (full kit)
2. Daved (trunk only)
3. Benjy (Bonnet only)
4. Aziz (Full Kit)
5. Appletree (full kit) (can some one PM if this goes ahead i'am crap at remebering to check)

Sun Jun 15, 2008 8:28 am

1. Eko (full kit)
2. Daved (trunk only)
3. Benjy (Bonnet only)
4. Aziz (Full Kit)
5. Appletree (full kit) (can some one PM if this goes ahead i'am crap at remebering to check)
6. SHAKEELE30 (full kit)

Sun Jun 15, 2008 9:25 am

1. Eko (full kit)
2. Daved (trunk only)
3. Benjy (Bonnet only)
4. Aziz (Full Kit)
5. Appletree (full kit) (can some one PM if this goes ahead i'am crap at remebering to check)
6. SHAKEELE30 (full kit)
7. MtechMart (full kit + 1 extra hood/bonnet set).

How is payment sorted and who will keep track and take collection etc?

Mon Jun 16, 2008 5:14 pm

Sorry for sounding thick guy's, but what is the price in £'s for the kit (and individual)

Mon Jun 16, 2008 6:05 pm

depends on the exchange rate but its ABOUT $62 / 1.97= £31.50 plus post and maybe customs and if you want 1/2 you would have to match with someone who wanted the other bit

Mon Jun 16, 2008 6:17 pm

Dave...count me in for a bonnet set for the race car...cheers...has anyone tried these yet...see they also do other BMW parts

Mon Jun 16, 2008 6:57 pm

Customs is easy to get by- they just put 'prototype samples' on the export form of no value.

Mon Jun 16, 2008 7:40 pm

as long as they dont get lost...

Are they going to one person or everyone individually

Tue Jun 17, 2008 12:19 am

nobodies volunteered yet but that's the idea

Tue Jun 17, 2008 7:47 am

Perhaps someone who is equidistant from everyone?

Tue Jun 17, 2008 8:40 am

Dave...you can do the North....if it is as good as it looks it will sell to the racers

Wed Jun 18, 2008 1:16 pm

i couldnt see if anyone asked this already but how do you fit them? are they adhesive?

Wed Jun 18, 2008 2:07 pm

self adhesive ..at least the oem one is

Wed Jun 18, 2008 7:01 pm

DaveD wrote:self adhesive ..at least the oem one is

cheers mate!

Thu Jun 19, 2008 8:29 pm

MtechMart wrote:1. Eko (full kit)
2. Daved (trunk only)
3. Benjy (Bonnet only)
4. Aziz (Full Kit)
5. Appletree (full kit) (can some one PM if this goes ahead i'am crap at remebering to check)
6. SHAKEELE30 (full kit)
7. MtechMart (full kit + 1 extra hood/bonnet set).
8. Yamoda

How is payment sorted and who will keep track and take collection etc? Seconded