325i touring PYF, a new little pic i found!
Moderator: martauto
-
andyp
- True Old Skooler
- Posts: 6899
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: LONDON
what you mean you can now see the rust.
-
tomtomiS
- E30 Zone Camper

- Posts: 1216
- Joined: Sun Aug 21, 2005 11:00 pm
- Location: Cricket Hill, Yateley
haha yes kinda! its not too bad in there as it goes! another blast before the engine goes back in should see it thru! im trying persuade Si he should clean the engine too but he looked at me like i had syphillis 
-
oguz327
- Captain Armco

- Posts: 4174
- Joined: Tue Oct 25, 2005 11:00 pm
- Location: Hampshire
tomtomiS wrote:haha yes kinda! its not too bad in there as it goes! another blast before the engine goes back in should see it thru! im trying persuade Si he should clean the engine too but he looked at me like i had syphillis
Was th TFR any good at removing the yellow shit the spray on at the factory like we were saying Tommo?
-
tomtomiS
- E30 Zone Camper

- Posts: 1216
- Joined: Sun Aug 21, 2005 11:00 pm
- Location: Cricket Hill, Yateley
yes it does mate, spray on leave to dwell for a bit and use a brush to help it then a good rinsing init 
-
tomtomiS
- E30 Zone Camper

- Posts: 1216
- Joined: Sun Aug 21, 2005 11:00 pm
- Location: Cricket Hill, Yateley
the stuff i "borrowed" from work wasnt overly strong so another go may get more gunk off, have got more in preparation for the weekends car reviving!
-
tomtomiS
- E30 Zone Camper

- Posts: 1216
- Joined: Sun Aug 21, 2005 11:00 pm
- Location: Cricket Hill, Yateley
come on Si be more enthusiastic, it WILL be in on saturday eveningSimon13 wrote:i won't be re using the oil pump! Thing is i cleaned out the sump when i changed the gasket last year.
The red plastic bits are off the broken spindle, Matt i only got the old engine out on sunday i'm getting the new one in this weekend i hope!
-
oguz327
- Captain Armco

- Posts: 4174
- Joined: Tue Oct 25, 2005 11:00 pm
- Location: Hampshire
can you borrow some more from work dude? sure they wont mind
are you round at Si's sunday Tommo?
are you round at Si's sunday Tommo?
-
oguz327
- Captain Armco

- Posts: 4174
- Joined: Tue Oct 25, 2005 11:00 pm
- Location: Hampshire
tomtomiS wrote:yes it does mate, spray on leave to dwell for a bit and use a brush to help it then a good rinsing init
Cant beat a good rinse out
-
tomtomiS
- E30 Zone Camper

- Posts: 1216
- Joined: Sun Aug 21, 2005 11:00 pm
- Location: Cricket Hill, Yateley
yea the valeters are pretty cool so no probsoguz327 wrote:can you borrow some more from work dude? sure they wont mind![]()
are you round at Si's sunday Tommo?
-
Levie
- E30 Zone Newbie

- Posts: 135
- Joined: Fri Jan 11, 2008 11:00 pm
- Location: Australia - Queensland
That is a hell of a nice tourer.... the smoked headlights and the ride hight suit the tourer great...
congrats
congrats

-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
yes fooking coont. l have been reborn the slagg Sh!tter. The love/hate affair continues. Well what a weekend!
Me and my able assistant TomtomiS have removed an engine from the donor wagon, serviced the engine, and fitted it into my manual turd


poor thing, tatty car but BMW dealer serviced it's whole life. 325i auto non switchable box - a right touch. 230,000 on the clock, top end rebuild at bmw on 160k including a brand new cylinder head! Glad i bought it now as it towed the other touring home and kept me mobile for the for the past 2 weeks

Ready to recieve an engine. We removed the old lump last weekend. Me tom cleaned the engine bay!

Engine out and on the stand to revcieve some loving before it went into the manual, cambelt etc

oil pump and new spindle, sump gasket also. This was the only bodge i found on the engine. It was clearly leaking badly from the sump, why?! because it had no gasket in there and just aload of sealant around it
how stupid!


Spigot bearing added for the input shaft of the manual box

lightened and standard flywheels next to each other. big difference in wieght to these!

New LUK clutch on, new clutch bolts and flywheel bolts

Gearbox on, bit of a nightmare getting this on! Gearbox has been cleaned new seals and renewed the linkage for a nice gear change instead of the stirring a pudding like most now. I've kept the standard gear lever as i'm not a fan of the short shifts imo

Engine back in and nearly all ready to fire her up

All back together and a huge sigh of relief from a mental weekend
Massive massive thanks to tom for all his help and putting up with my temper tantrums when it wasn't going to plan!
Drives pukka now ready for some action at the ring in 2 weeks. Bloody thing flies with the flywheel on it. Has made a big big difference to the on road performance. I was very surprised at the difference. Idle is still spot on, no loss of torque. Has really made it come alive in a way a 2.5 with a cam can't across the whole rev range
Lets see what abuse this lump can take. I hope it's a strong one!
Me and my able assistant TomtomiS have removed an engine from the donor wagon, serviced the engine, and fitted it into my manual turd


poor thing, tatty car but BMW dealer serviced it's whole life. 325i auto non switchable box - a right touch. 230,000 on the clock, top end rebuild at bmw on 160k including a brand new cylinder head! Glad i bought it now as it towed the other touring home and kept me mobile for the for the past 2 weeks

Ready to recieve an engine. We removed the old lump last weekend. Me tom cleaned the engine bay!

Engine out and on the stand to revcieve some loving before it went into the manual, cambelt etc

oil pump and new spindle, sump gasket also. This was the only bodge i found on the engine. It was clearly leaking badly from the sump, why?! because it had no gasket in there and just aload of sealant around it


Spigot bearing added for the input shaft of the manual box

lightened and standard flywheels next to each other. big difference in wieght to these!

New LUK clutch on, new clutch bolts and flywheel bolts

Gearbox on, bit of a nightmare getting this on! Gearbox has been cleaned new seals and renewed the linkage for a nice gear change instead of the stirring a pudding like most now. I've kept the standard gear lever as i'm not a fan of the short shifts imo

Engine back in and nearly all ready to fire her up

All back together and a huge sigh of relief from a mental weekend
Massive massive thanks to tom for all his help and putting up with my temper tantrums when it wasn't going to plan!
Drives pukka now ready for some action at the ring in 2 weeks. Bloody thing flies with the flywheel on it. Has made a big big difference to the on road performance. I was very surprised at the difference. Idle is still spot on, no loss of torque. Has really made it come alive in a way a 2.5 with a cam can't across the whole rev range
Lets see what abuse this lump can take. I hope it's a strong one!
-
tomson
- E30 Zone Addict

- Posts: 3598
- Joined: Sun Nov 06, 2005 11:00 pm
- Location: Bristol
Good work Si, lucky it didnt rain by the looks of it!!
-
d6dph
- Married to the E30 Zone

- Posts: 12435
- Joined: Sun Aug 14, 2005 11:00 pm
- Location: Tiptree. Essex
Nice work gents.
What did the flywheel cost Si, It was an Iain Temple one wasn't it?
What did the flywheel cost Si, It was an Iain Temple one wasn't it?

-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
Flywheel yes was from Iain temple. i must tell him it arrived!
£100 posted. He wants the old one back
f**king great mod it is too, but only worth doing if you need a clutch like i did imo
f**king great mod it is too, but only worth doing if you need a clutch like i did imo
-
bss325i
- E30 Zone Team Member

- Posts: 24532
- Joined: Sat Jan 20, 2007 11:00 pm
- Location: London/Surrey
Nice one Si. Black bonnet? Is that a clue?
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
no i just put it on to see what it would look like, i quite like it!
-
bss325i
- E30 Zone Team Member

- Posts: 24532
- Joined: Sat Jan 20, 2007 11:00 pm
- Location: London/Surrey
I did suggest this a while ago when you needed a bonnet for the C2 but you said "it will look even more council init?"Simon13 wrote:no i just put it on to see what it would look like, i quite like it!
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
no said it might make it a bit council as you can see in the bottom pic it's mint and it might give off the wrong vibes
If the bonnet was blue it would look sh!t Barry
If the bonnet was blue it would look sh!t Barry
-
d6dph
- Married to the E30 Zone

- Posts: 12435
- Joined: Sun Aug 14, 2005 11:00 pm
- Location: Tiptree. Essex
At least bung a badge on it Si. 
Would you recommend a lightened flywheel then? I'll be chucking a new clutch in mine in a couple of months so it's an ideal time to do it.
Would you recommend a lightened flywheel then? I'll be chucking a new clutch in mine in a couple of months so it's an ideal time to do it.

-
Jesus325iTouring
- Frog freak !

- Posts: 11356
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Omnipresent!
Good work Si and Tom..........the b1tch lives on


X5 V8 for thrills, CRV for chills, Range Rover P38 V8 for sooooo much aggravation...
-
bss325i
- E30 Zone Team Member

- Posts: 24532
- Joined: Sat Jan 20, 2007 11:00 pm
- Location: London/Surrey
black
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
Dave you coming to the Ace 2moro? I'll take you for a spin so you can sample yourself but i'd say yes 100%
-
d6dph
- Married to the E30 Zone

- Posts: 12435
- Joined: Sun Aug 14, 2005 11:00 pm
- Location: Tiptree. Essex
Can't make it again. My managers Mrs is due to go into labour any day so I have to work until further notice. F*ck knows when I'll get a day off next. 

-
tomtomiS
- E30 Zone Camper

- Posts: 1216
- Joined: Sun Aug 21, 2005 11:00 pm
- Location: Cricket Hill, Yateley
indeed it did rain, what a pain in the arse! only to stop once we had pushed the car into the garagetomson wrote:Good work Si, lucky it didnt rain by the looks of it!!
-
B7
- E30 Zone Team Member

- Posts: 15841
- Joined: Tue Feb 13, 2007 11:00 pm
- Location: Surrey / West Sussex
I'm glad it worked out for you mate. So the engine seems strong? Still on standard Cam?
B7's Motto. "If it's French, BURN IT!!!!!!"
-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
Do it Dave!!d6dph wrote:At least bung a badge on it Si.
Would you recommend a lightened flywheel then? I'll be chucking a new clutch in mine in a couple of months so it's an ideal time to do it.
Great work there Si!!
-
Karan
- Married to the E30 Zone

- Posts: 8004
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Cheshunt, Hertfordshire
nice bonnet
-
Templ8e30
- E30 Zone Addict

- Posts: 2801
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Ashton-under-Lyne, Lancashire
Good work Simon, Tom too.
Glad you like the flywheel
Sorry about the surface rust on it, shed roof leaked right onto it overnight
Cheers,
Iain T
Glad you like the flywheel
Sorry about the surface rust on it, shed roof leaked right onto it overnight
Cheers,
Iain T

2007 Mazda 6 2.0 estate
Political Correctness - A concept based on the idea that its possible to pick up a turd by the clean end !
-
glenn
- Engine Transplant Services

- Posts: 2196
- Joined: Sat Jan 29, 2005 11:00 pm
- Location: blackwood, south wales
excellent work you two
well done
glenn
well done
glenn
-
Morat
- E30 Zone Team Member

- Posts: 8943
- Joined: Thu Feb 09, 2006 11:00 pm
- Location: The Peoples Republic of Yorkshire
congrats simon - looks like you had a busy weekend 
E30 Touring 0.35 cD - more slippery than prison soap 

Praise the Lard... and pass the dripping!

Praise the Lard... and pass the dripping!
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
the turd is coming home..........
-
Jon_Bmw
- Dangerous when thinking

- Posts: 7604
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Salisbury
You bought it back...or has it been repo'd! 
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
no i'm buying it back probably going to break her for buts for the other 2 caes! 
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
I know shes sadly been dead/scrapped nearly a year but i found this awsome pic of PYF the other day flat out going round the Nurburgring complete with iS lip spoiler hanging off. I had to pay 10 euros for it but i thought it was well worth it!

Its nearly on the rims the tyres are leaning so much! I think thats Barry BSS in with me
Been looking for an excuse to post it but i just thought sod it!

Its nearly on the rims the tyres are leaning so much! I think thats Barry BSS in with me
Been looking for an excuse to post it but i just thought sod it!
-
bss325i
- E30 Zone Team Member

- Posts: 24532
- Joined: Sat Jan 20, 2007 11:00 pm
- Location: London/Surrey
RIP PYF!
She was a good old turd!
She was a good old turd!




