What now?
Cruise Control socket missing...
Moderator: martauto
-
Meister_Munch
- E30 Zone Newbie
- Posts: 59
- Joined: Wed Apr 16, 2008 11:00 pm
Insanely (!) there's no socket to accept the C/C loom in the accessory panel!
What now?
What now?
-
Meister_Munch
- E30 Zone Newbie
- Posts: 59
- Joined: Wed Apr 16, 2008 11:00 pm
I doubt that has anything to do with it but the question remains.
Why would they make a loom that cannot connect to their own provision cluster?
Why would they make a loom that cannot connect to their own provision cluster?
-
Meister_Munch
- E30 Zone Newbie
- Posts: 59
- Joined: Wed Apr 16, 2008 11:00 pm
I've heard of people taking a feed off the brake pedal switch but that's not proper is it?
-
Meister_Munch
- E30 Zone Newbie
- Posts: 59
- Joined: Wed Apr 16, 2008 11:00 pm
All connectors are pretty straightforward.
Clutch switch at clutch switch, Computer plugged in, Stalk connected properly, earthed properly - the last plug which goes to the provision panel does not fit anywhere there - I've read of others having this problem.
I'll take some pix.
The loom and stalk are brand new from BMW. It's a 1992 Touring.
Clutch switch at clutch switch, Computer plugged in, Stalk connected properly, earthed properly - the last plug which goes to the provision panel does not fit anywhere there - I've read of others having this problem.
I'll take some pix.
The loom and stalk are brand new from BMW. It's a 1992 Touring.
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
i can't remember exactly where the cruise plugs go in the accessory panel but why don't you find a breaker and cut off some plugs in this area that fits. Cut the old ones off and solder in the ones that fit?
It's only 2 wires iirc
It's only 2 wires iirc