325i touring PYF, a new little pic i found!
Moderator: martauto
-
Theo
- Old Skooler

- Posts: 10735
- Joined: Wed Jun 01, 2005 11:00 pm
- Location: Kent
A spare gear linkage is now in my 'Ring Spares' box! 250 miles in 4th is not something I want to do again 
-
oguz327
- Captain Armco

- Posts: 4174
- Joined: Tue Oct 25, 2005 11:00 pm
- Location: Hampshire
Simon, ill pop up sunday to help out and cause trouble 
-
pacerpete
- E30 Zone Team Member

- Posts: 18165
- Joined: Sun Jan 23, 2005 11:00 pm
- Location: Iver heath. South bucks.
iS it true this engines demise was caused by a 60mm slammed council chariot hitting a speedbump or is that just an educated guess ? 
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
maybe! it's probably 80% the reason but i won't know until i strip it. Thing is the sump is intact and it isn't leaking any oilpacerpete wrote:iS it true this engines demise was caused by a 60mm slammed council chariot hitting a speedbump or is that just an educated guess ?
-
bmwe30mtech
- Engaged to the E30 Zone

- Posts: 5288
- Joined: Thu Feb 03, 2005 11:00 pm
Glad you seem to have taken this bit of news quite well considering!
I know its a workhorse but i really like this car. Just promise me you wont be using the alpina interior as a builders caff also!
I know its a workhorse but i really like this car. Just promise me you wont be using the alpina interior as a builders caff also!
1988 M3 EvoII, Macau Blue/EvoII trim
1989 325i Sport M Tech II, Diamond Black/Black leather
1989 325i Sport M Tech II, Diamond Black/Black leather
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
alpina isn't and won't be for work use, just a weekend/evening toy
I towed it back last night and the engine is ready to pull out on the weekend everything is diconnected and and un plugged.
Drained the oil and it was full of swarf almost
some quite large shiney "bits" floating about in there, poor thing
I towed it back last night and the engine is ready to pull out on the weekend everything is diconnected and and un plugged.
Drained the oil and it was full of swarf almost
-
oguz327
- Captain Armco

- Posts: 4174
- Joined: Tue Oct 25, 2005 11:00 pm
- Location: Hampshire
At least it didnt shit it self at the ring!
-
Jesus325iTouring
- Frog freak !

- Posts: 11356
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Omnipresent!
Well Si,you beat me in the end,my engine had enough circa 233,000 miles,it was still running mind,I just could no longer warrant putting a litre of oil a day in it!
I love your interior,reminds me of someone elses

I love your interior,reminds me of someone elses

X5 V8 for thrills, CRV for chills, Range Rover P38 V8 for sooooo much aggravation...
-
Karan
- Married to the E30 Zone

- Posts: 8004
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Cheshunt, Hertfordshire
shit sorry to hear this give us a shout if you want a hand swapping dude.... sure it wont take long
Karan
Karan
-
fuzzy
- He who sleeps with "Gingers"
- Posts: 14351
- Joined: Sat Jun 04, 2005 11:00 pm
- Location: melbourne Australia
that would be a nightmare scenario. hundreds of miles from home in a foreign country.oguz327 wrote:At least it didnt shit it self at the ring!
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
Got the engine out today
had a bit of a poke around once it was out but i'll know a bit more tomorrow

Chav i know before anyone says!


It's out!

fubared clutch

Do i clean in here this week?!
So hopefully i'll have my lightened flywheel of Temple30 and i can get my replacement engine in and fitted with a new clutch and some other bits and see how long the next engine lasts! lol

Chav i know before anyone says!


It's out!

fubared clutch

Do i clean in here this week?!
So hopefully i'll have my lightened flywheel of Temple30 and i can get my replacement engine in and fitted with a new clutch and some other bits and see how long the next engine lasts! lol
-
oguz327
- Captain Armco

- Posts: 4174
- Joined: Tue Oct 25, 2005 11:00 pm
- Location: Hampshire
I would give the engine bay a good clean Simon, will make it a nicer place to work and its easy with the engine out init!
Dont stop there though, if you open the door you will find the driving control area which could also do with a damn good clean and general cess removal
cue mattg dissing the state of my van
Dont stop there though, if you open the door you will find the driving control area which could also do with a damn good clean and general cess removal
cue mattg dissing the state of my van
Last edited by oguz327 on Sun Apr 20, 2008 11:13 pm, edited 1 time in total.
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
but it's just a milege whore! i might* do that
-
bss325i
- E30 Zone Team Member

- Posts: 24532
- Joined: Sat Jan 20, 2007 11:00 pm
- Location: London/Surrey
Do it you scumbag!
-
B7
- E30 Zone Team Member

- Posts: 15841
- Joined: Tue Feb 13, 2007 11:00 pm
- Location: Surrey / West Sussex
Looks like you had a succesful day Si. At least the wather held out. Keep the photos coming. When you pulling the Auto lump out?
B7's Motto. "If it's French, BURN IT!!!!!!"
-
Karan
- Married to the E30 Zone

- Posts: 8004
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Cheshunt, Hertfordshire
good stuff!..yeh may aswell giove bay a clean, makes it a much nicer place to work
-
andyp
- True Old Skooler
- Posts: 6899
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: LONDON
only just seen this post, only read this page so far, cant believe you killed a perfect good engine.
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
i didnt kill it. The sump was intact as i said. I drained 4 litres of oil out. Clearly a pump issue, it looks like now. I'm about to go out and strip it right down. My only concern now is to see whats worn out, mainly on the top end. Cam lobes look good but i want to get the cam out to check the main ends and pray that a pukka head isnt scrap
-
B7
- E30 Zone Team Member

- Posts: 15841
- Joined: Tue Feb 13, 2007 11:00 pm
- Location: Surrey / West Sussex
As you say Si. at 230k the pumps probably f*cked. Did you manage to get a new one for the auto lump? Money well spent I reckon as their similar mileage.
B7's Motto. "If it's French, BURN IT!!!!!!"
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
i have a new pump yes and soon a light flywheel, should spice up this standard lump a touch!
-
B7
- E30 Zone Team Member

- Posts: 15841
- Joined: Tue Feb 13, 2007 11:00 pm
- Location: Surrey / West Sussex
Simon13 wrote:
Just spotted this. Look like your about to start crying in this shot
B7's Motto. "If it's French, BURN IT!!!!!!"
-
Jesus325iTouring
- Frog freak !

- Posts: 11356
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Omnipresent!
Proper heroness going on here Si
Great to see another E30 being saved rather than sent to China to made into Coke cans and airplanes,why let major engine failure be an issue
PS Good to see you've got windscreen wipers to,do they actually work or just for show?!
PS Good to see you've got windscreen wipers to,do they actually work or just for show?!

X5 V8 for thrills, CRV for chills, Range Rover P38 V8 for sooooo much aggravation...
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
Stripped her down tonight and found the "problem" lol


Shells look like they were getting hot! would of seized quickly i recon


Pistons coming out usual wear on the thrust side, bores look pukka with honing marks clearly seen down all of the bores but nothing obviously wrong yet........
Hmmm bits of red plastic in the sump

Time to look at the oil pump

Ouch that'll be why the oil light came on! The bloody spindle had snapped but why?


broken spindle next to a good one
Also i couldn't spin the pump gears round by hand, so i took that apart


Pictures are sh!te but basically the gears were jammed by a small piece of metal. You can see in the bottom pic where theres a big groove in the casing and then the pump or spindle had had enough. It nearly worked it's way right round though. Who knows what would of happened if it had been passed else where through the lump. What gets me is how did it get through the filter? i doesn't really look small enough
Also it doesn't prove to me that wacking the sump on a speed hump caused this to happen either and it could of been a coincidence?
Top end was mint and had no wear on the cam lobes or rockers. Light scores on the main ends of the cam but don't they all? So overall i'm pleased that the engine looked to be in good health, and lots of parts can still be re used. So i think as i quite like this engine it shall have to be rebuilt into a 2.7 of some sort.


Shells look like they were getting hot! would of seized quickly i recon


Pistons coming out usual wear on the thrust side, bores look pukka with honing marks clearly seen down all of the bores but nothing obviously wrong yet........
Hmmm bits of red plastic in the sump

Time to look at the oil pump

Ouch that'll be why the oil light came on! The bloody spindle had snapped but why?


broken spindle next to a good one
Also i couldn't spin the pump gears round by hand, so i took that apart


Pictures are sh!te but basically the gears were jammed by a small piece of metal. You can see in the bottom pic where theres a big groove in the casing and then the pump or spindle had had enough. It nearly worked it's way right round though. Who knows what would of happened if it had been passed else where through the lump. What gets me is how did it get through the filter? i doesn't really look small enough
Also it doesn't prove to me that wacking the sump on a speed hump caused this to happen either and it could of been a coincidence?
Top end was mint and had no wear on the cam lobes or rockers. Light scores on the main ends of the cam but don't they all? So overall i'm pleased that the engine looked to be in good health, and lots of parts can still be re used. So i think as i quite like this engine it shall have to be rebuilt into a 2.7 of some sort.
-
oguz327
- Captain Armco

- Posts: 4174
- Joined: Tue Oct 25, 2005 11:00 pm
- Location: Hampshire
Interesting stuff Simon.
Looks like an oil pump change would be wise at 200k or sooner for anyone else reading this.
Good to hear the cam and head are ok to re-use, any more thoughts on what spec 2.7 your going for?
I take it the cam and alpina pistons?
Looks like an oil pump change would be wise at 200k or sooner for anyone else reading this.
Good to hear the cam and head are ok to re-use, any more thoughts on what spec 2.7 your going for?
I take it the cam and alpina pistons?
-
bss325i
- E30 Zone Team Member

- Posts: 24532
- Joined: Sat Jan 20, 2007 11:00 pm
- Location: London/Surrey
Nice one, at least the top end parts are ok. 
-
stonesie
- E30 Zone Addict

- Posts: 3277
- Joined: Sat Jan 07, 2006 11:00 pm
- Location: Doncaster
Simon13 wrote:
Pictures are sh!te but basically the gears were jammed by a small piece of metal. You can see in the bottom pic where theres a big groove in the casing and then the pump or spindle had had enough. It nearly worked it's way right round though. Who knows what would of happened if it had been passed else where through the lump. What gets me is how did it get through the filter? i doesn't really look small enough
Well the filter is after the pump, you need to see if the strainer has any holes in gauze before you re-use that, to be honest that piece of metal could have been sat in the sump in a quiet corner out of the main flow of oil for weeks, months eaven years. Then it got disturbed and somhow got past the strainer, only the tight tolerances of the pump gears stopped it makeing its way into the bowells of the engine and saved your top end.
-
Bewdley320T
- E30 Zone Regular

- Posts: 335
- Joined: Tue Jul 24, 2007 11:00 pm
- Location: Bewdley, Worcestershire.
[quote]Hmmm bits of red plastic in the sump
Did I miss it or did you find out what the red plastic bits were??
Did I miss it or did you find out what the red plastic bits were??
-
B7
- E30 Zone Team Member

- Posts: 15841
- Joined: Tue Feb 13, 2007 11:00 pm
- Location: Surrey / West Sussex
Si you lucky git! one saved top end but I reckon only by your fast reaction to shut it down.
Excellent write up to mate.
Excellent write up to mate.
B7's Motto. "If it's French, BURN IT!!!!!!"
-
mattG
- E30 Zone Camper

- Posts: 1231
- Joined: Tue Jul 04, 2006 11:00 pm
- Location: Surrey
the stink is beyond wordsoguz327 wrote:I would give the engine bay a good clean Simon, will make it a nicer place to work and its easy with the engine out init!
Dont stop there though, if you open the door you will find the driving control area which could also do with a damn good clean and general cess removal![]()
cue mattg dissing the state of my van

Si did you get finished on Sunday or did that S50 turd distract you

(\__/)
(='.'=)Simon13 wrote:
323's were dangerous this will un drivable in the wet!
MattG - hedgefinding specialist
E21 turbo
Can be your new sig matt!
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
i won't be re using the oil pump! Thing is i cleaned out the sump when i changed the gasket last year.
The red plastic bits are off the broken spindle, Matt i only got the old engine out on sunday i'm getting the new one in this weekend i hope!
The red plastic bits are off the broken spindle, Matt i only got the old engine out on sunday i'm getting the new one in this weekend i hope!
-
d6dph
- Married to the E30 Zone

- Posts: 12435
- Joined: Sun Aug 14, 2005 11:00 pm
- Location: Tiptree. Essex
"Missing member of Goldie looking chain found"Simon13 wrote:
Guns don't kill people, M20's do!

-
gooner1
- Out humping Reindeer
- Posts: 13280
- Joined: Fri Apr 14, 2006 11:00 pm
- Location: Northampton.For my sins.
Good write up Simon.

-
bobafett
- E30 Zone Regular

- Posts: 285
- Joined: Tue Dec 12, 2006 11:00 pm
- Location: Bristol
Now that's a write-up ! Great work mate!!!!
What ?! Drive straight officer......It's an E30 !
It's the Ultimate Drifting Machine.
It's the Ultimate Drifting Machine.
-
Karan
- Married to the E30 Zone

- Posts: 8004
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Cheshunt, Hertfordshire
something u left in there Si last time u had the sump off???
good to hear the top end is ok, she was a screamer!
good to hear the top end is ok, she was a screamer!
-
tomtomiS
- E30 Zone Camper

- Posts: 1216
- Joined: Sun Aug 21, 2005 11:00 pm
- Location: Cricket Hill, Yateley
you will all be pleased to know that a healthy dose of tfr has been let loose on the engine bay, it kinda looks reasonable in there now!!



