How to get a bumper off

[Lightyears_2008]

Im having trouble figuring this one out, ive sussed out how to get the valance off but as i understand the bumper needs to get off first, any help on how to remove this?

[Hyperion]

Hi
You need a a Torque wrench, the bumper is held on with two T55 size bolts. You will find them if you look at the underside of the bumper. Loosen the bolts and then slide the bumper off, you will need to disconnect the wires to the indicators aswell, but you will only need to do this once you start sliding the bumper off... (you know what i am taking about once you start sliding the bumper off)
Hope this helps.

[Lightyears_2008]

many thanks hyperion, will check it out later on. much appriciated

[Tommo32]

torque wrench????????

[Chris-W]

Male Torx socket

Might also be 10mm male hex, though....might be pre-facelift too, come to think of it.

[Tommo32]

thought torque wrench sounded a bit off!!!!

[Andyboy]

Some have T55 torx, some are allen bolts. With both removed the bumper slides off but watch the indicator connectors - they're real fun to refit when balancing a bumper on your knee.