Steering Guibo Groupbuy: Second Batch SEE NEW THREAD
Moderator: martauto
-
Dan318-is
- Married to the E30 Zone
- Posts: 8006
- Joined: Wed Jul 06, 2005 11:00 pm
- Location: Surrey/London
Thanks james, received.
Ok guys i have about five of these left (if liam takes two which im sure he will)
ed325, maxfield, and blitz have dropped out. Still awaiting contact form trish30rally, cypriot boy, Yan & fowler so let me know soon guys as i want to order by wednesday at the VERY latest next week.
Ok guys i have about five of these left (if liam takes two which im sure he will)
ed325, maxfield, and blitz have dropped out. Still awaiting contact form trish30rally, cypriot boy, Yan & fowler so let me know soon guys as i want to order by wednesday at the VERY latest next week.
My steering guibo is getting rather loose and tightening it up isnt doing much good anymore so put me down for one please. 
-
Trise30rally
- E30 Zone Regular
- Posts: 383
- Joined: Thu Oct 18, 2007 11:00 pm
- Location: Jersey
Trish e30 rally???? 
I take offence!!!
I will pm you now mate.
I take offence!!!
I will pm you now mate.
-
maggspower
- Turbo Farmer Tractor Driver
- Posts: 2376
- Joined: Wed Oct 12, 2005 11:00 pm
- Location: Nowhere near South Wales, ok butt
paid and pm on its way cheers dude good work 
-
Dan318-is
- Married to the E30 Zone
- Posts: 8006
- Joined: Wed Jul 06, 2005 11:00 pm
- Location: Surrey/London
He has a point max. You & 1an are criminals when it comes to dropping outmaxfield wrote:Theo325 wrote:Gosh, there's a suprise.maxfield, and blitz have dropped out
Awaiting payement oz!
No PM yet matemaggspower wrote:paid and pm on its way cheers dude good work
-
cypriot_boy_2k7
- E30 Zone Squatter
- Posts: 1641
- Joined: Mon Jan 29, 2007 11:00 pm
- Contact:
dan paid, sent it off today
-
maggspower
- Turbo Farmer Tractor Driver
- Posts: 2376
- Joined: Wed Oct 12, 2005 11:00 pm
- Location: Nowhere near South Wales, ok butt
Should be there now.
I don't type too good like what other people can
I don't type too good like what other people can
I'm trying to get a few E30/E36 ones made up.
I have the bolt patern but not the length
Every feckin time I go to try get a slot to get them machined on the CNC stuff, the things are being used or else nobody is around
Did you use Alloy or Steel, Dan?
The one in your car looks tasty
I have the bolt patern but not the length
Every feckin time I go to try get a slot to get them machined on the CNC stuff, the things are being used or else nobody is around
Did you use Alloy or Steel, Dan?
The one in your car looks tasty
M42 rightness above 6500rpm, nobody can hear you scream
-
oldroydsr4
- E30 Zone Squatter
- Posts: 1579
- Joined: Tue Oct 25, 2005 11:00 pm
- Location: Warwick
Hi dan,
just wondering when will we recieve the guibo.
cheers
just wondering when will we recieve the guibo.
cheers
-
Dan318-is
- Married to the E30 Zone
- Posts: 8006
- Joined: Wed Jul 06, 2005 11:00 pm
- Location: Surrey/London
Malcolm, i need your address and i wont be at ace for another month and a half if you want to wait that long its fine! Same goes dave, if you want one no problem. PM me to confirm, i will happily take cheques too! As i wont be at any meets for at least 4-5 weeks because of university im afraid.
Dave, i used alloy. The two holes need to me 45mm offset and two holes need to be 50mm offset for e36 rack (i think) but not many people seem to have them these days! From some quick calculations using ian haynes article i think the length should be around 44mm. If enough people are interested i will ask the suppliers of these to knock up a few sets although i will need a prototype volunteer!
Old roy, i thought it was going to be 7-10 days for production but to my utter amazement i rang them today and they are done alreday!! Now theo is going to pick them up mid-week, i shall be receiving them of him thursday or posisbly friday although im am extremely busy with a lot of important university deadlines looming so i may not receive them until the weekend. I then have to label, package and post them which i will try and do early next week, however, i have taken note of the order in which people have paid and will be posting small numbers at a time to keep track of them. They will be posted out in the order that they were paid for.
Hope this is ok, will post up when i have received the guibo's myself with a picture or so and will put up some info from there, hopefully they should be posted in 10 days max to all buyers.
PS i still have 3 left, if malcolm & dave takes one i will only have one!
Dave, i used alloy. The two holes need to me 45mm offset and two holes need to be 50mm offset for e36 rack (i think) but not many people seem to have them these days! From some quick calculations using ian haynes article i think the length should be around 44mm. If enough people are interested i will ask the suppliers of these to knock up a few sets although i will need a prototype volunteer!
Old roy, i thought it was going to be 7-10 days for production but to my utter amazement i rang them today and they are done alreday!! Now theo is going to pick them up mid-week, i shall be receiving them of him thursday or posisbly friday although im am extremely busy with a lot of important university deadlines looming so i may not receive them until the weekend. I then have to label, package and post them which i will try and do early next week, however, i have taken note of the order in which people have paid and will be posting small numbers at a time to keep track of them. They will be posted out in the order that they were paid for.
Hope this is ok, will post up when i have received the guibo's myself with a picture or so and will put up some info from there, hopefully they should be posted in 10 days max to all buyers.
PS i still have 3 left, if malcolm & dave takes one i will only have one!
-
oldroydsr4
- E30 Zone Squatter
- Posts: 1579
- Joined: Tue Oct 25, 2005 11:00 pm
- Location: Warwick
Thats great dan.