I dont need the pas pump on my m50 engine as my car has a manual rack.
The thing is the belt will be to long so is there away around this ?
Can I use the pullys from a m20 so I can use a m20 fan belt ?
Ed
M50 belt help
Moderator: martauto
-
ed325i
- E30 Zone Addict
- Posts: 4146
- Joined: Mon Jan 10, 2005 11:00 pm
Last edited by ed325i on Mon Apr 07, 2008 7:01 pm, edited 1 time in total.
-
DanThe
- E30 Zone Team Member
- Posts: 28646
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
No chance of using M20 pulleys.
Remove the pump, measure how long a new belt needs to be with some string then go to halfrauds
Remove the pump, measure how long a new belt needs to be with some string then go to halfrauds
-
ed325i
- E30 Zone Addict
- Posts: 4146
- Joined: Mon Jan 10, 2005 11:00 pm
I will have a look at what they have.
-
ed325i
- E30 Zone Addict
- Posts: 4146
- Joined: Mon Jan 10, 2005 11:00 pm
Found out you use a 1415mm 6 - rib belt just need to find one.
-
ed325i
- E30 Zone Addict
- Posts: 4146
- Joined: Mon Jan 10, 2005 11:00 pm
I have removed the pas pump.
will it be ok to fit the belt like this ?
will it be ok to fit the belt like this ?
-
dave525
- E30 Zone Regular
- Posts: 427
- Joined: Mon Feb 21, 2005 11:00 pm
no,it will hurt your hand 
only joking.i dont think enough belt is round the crank and youve also missed the tensioner.see if it will go around the top of the crank from the left,round the tensioner,back round the water pump.
only joking.i dont think enough belt is round the crank and youve also missed the tensioner.see if it will go around the top of the crank from the left,round the tensioner,back round the water pump.