Hi there,
What is a good condition Mtech 2 full kit worth?????
I have been offered one for Ԛ£100 but ill need to spray it...
What u guys reckon???
cheers
DAN
Mtech 2 kit
Moderator: martauto
-
DanJones
- E30 Zone Newbie

- Posts: 149
- Joined: Sat Jan 15, 2005 11:00 pm
- Location: Conwy, North Wales
-
Wilson
- E30 Zone Regular

- Posts: 725
- Joined: Sat May 21, 2005 11:00 pm
- Location: Ipswich
between 350 - 500 for good one I think...
100 is a steal providing its gen BMW... heard that fibreglass replicas are not really worth it!!!
100 is a steal providing its gen BMW... heard that fibreglass replicas are not really worth it!!!
-
DanJones
- E30 Zone Newbie

- Posts: 149
- Joined: Sat Jan 15, 2005 11:00 pm
- Location: Conwy, North Wales
Ah rite.....got a suspicion that its a fibreglass kit.....will look into that..
cheers
cheers
-
Zayyan
- Engaged to the E30 Zone

- Posts: 6385
- Joined: Wed Jan 12, 2005 11:00 pm
- Location: Aylesbury
I think it should have little M-Teknik badges all over it if it's genuine.
If you have any pics I know davetouring can spot the difference between a genuine and replica one.....somehow
If you have any pics I know davetouring can spot the difference between a genuine and replica one.....somehow

-
SwirlyE30
- E30 Zone Squatter

- Posts: 1509
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Worthing-Brighton South Coast
Its pretty easy to see the difference really. Firstly, Gen BMW kits (e.g M Tech2) has stickers on them. Each front side pod should have a small Mtechnic sticker near the front arch, and the rear spoiler should have one on the right as well. Or at least a recess for a sticker.
Also the front bumpers are two parts, the lower valance, and the actual bumper with indicators etc.
You can also tell from the material, the side skits for example are quite bendy, their rugged, but you can twist them and flex them a bit, they arnt 100%stiff.
Oh and their also pretty weighty, the front bumper (not the valance) has some weight to it!
Also the front bumpers are two parts, the lower valance, and the actual bumper with indicators etc.
You can also tell from the material, the side skits for example are quite bendy, their rugged, but you can twist them and flex them a bit, they arnt 100%stiff.
Oh and their also pretty weighty, the front bumper (not the valance) has some weight to it!
1986 Chevrolet Corvette. 330ftlb torque....V8s rule!
