Brakets for TT disks.

[buster]

Hi guys,
Im going to make a batch of these.
They will be made from 304 stainless steel.
I can offer these for £50 a pair.I can do them for this price because of no middle man,as i make these myself on a cnc machine.
I can also machine a pair of disks for £20.I've done these before.
Just buying in the stainless steel now.
I can make them from anything but i believe the stainless would be best.

Put your name down if your interested.

cheers,
andy

[ric325i]

oh cheaper prices comming in.

the teesside boys battling it out.


any ideas if they will fit under 16's?


buster did you ever put a X section in your exhaust after the rolling road?

[buster]

They should fit under most 16" wheels depending on the offset.Some do require spacers.
No X section in exhaust, i may get around to it one day

[Andy335Touring]

How soon can you get them made up for ?

It'd be nice to have them to play with on easter week end ?

Direct bank account transfer OK ?

[Keg_gt]

looking good

[buster]

How soon can you get them made up for ?

It'd be nice to have them to play with on easter week end ?

Direct bank account transfer OK ?

Hi Andy ,not likely mate.Still waiting on supplier for the 304 stainless.

I did get the programs and jig made up last night though :



Just need the material now.

cheers
andy

[Andy335Touring]

Ok, cheers any way mate, sorry i'm being impatient, beefy can make me a set up out of an off cut of stainless so i can have them for the B/H week end.

[Bob_S]

can you PM me when these are available i am defo interested thanks

[midnight]

yeah im definately interested too, ant recomended you so can you pm me when your ready with the materials

[buster]

Hi guys,
I have made a pair for testing and they will soon be tested on an old e30 strut.I need to make sure my design fits ok before i start production.
Thanks for your interest guys,i will let you know as soon as the proper stainless ones are done.

cheers
andy

[miniblob]

I may well be interested - keep us posted!!!

[Quaser]

Me too!

[buster]

Having trouble getting the stainless steel tbh guys.The test ones i made were in steel,and of course the strut is steel so maybe they'd be ok in steel.Just look turd when they rust over.
I'll get something sorted soon,just been busy as a bee lately.

[Bob_S]

howare you getting on with these mate?

[dips346]

buster let me know whens its a go ahead please

[miniblob]

Me too - gonna need some of these brackets from somewhere!!!!!

[Omi]

Buster, do them in mild steel, bring the cost down. - It's plenty strong enough and can be painted/treated easily.

They're easy enough to pull off and refinish if they go rusty in 3 years' time too.

[cypriot_boy_2k7]

what calipers would you use?? tt ones to?

[oguz327]

I will deffo be up for a set of these too, give a shout when its a goer.

Oz

[buster]

What do you think guys ? Steel ? Im having trouble getting 304 stainless.Obviously cheaper in steel.
I have been very busy lately ,and not had time to search again for the material.

[Omi]

Steel is fine. - Not like anyone has stainless struts or calipers.

Cypriot, 540i calipers are most popular, have a look round www.300mm.de

[Wilson325i]

am interested in this group buy, let me know when you want payment.

[miniblob]

As long as these are spot on for the E34 540i calipers, I'll be taking a set!!!

What would weigh less, Stainless or Mild??

Could do with them sooner rather than later though - want my car back on the road!!!!!

[Omi]

Stainless is slightly lighter, I understand. Think it might depend on the grade...

Could lay up some nice carbon/steel-sleeved versions?

[Wilson325i]

any updates on these bits?

[oze30]

Did you get my PM?

[Keg_gt]

really needs these to get my wheels fitted any more progress if i post you some material can you make me some up please

[buster]

Hi guys.Sorry but i just haven't got the time to make these anymore.I made 1 set and they are yet to be fitted.