We have just added to the site 2 new Complete polishing kits, including either a Porter Cable 7424 or UDM Machine.
Both Kits are stupidly good value for money and have everything you need to get started with machine polishing.
Check them out here:
http://www.pro-detailing.co.uk/index.php?cat=21
Cheers - Nick
__________________
WWW.PRO-DETAILING.CO.UK
2 New Complete Polishing Kits from Pro-Detailing....
Moderator: martauto
-
grantfk10
- E30 Zone Meets/Events Team
- Posts: 2926
- Joined: Mon Jan 17, 2005 11:00 pm
- Location: UFOland, Central Scotland
£175 and then I need to buy a transformer too? I wouldn't say it was "stupidly good" , but if folks want to pay that - fair enough. 
Maybe what they say about the Scots being tight is true.....
Maybe what they say about the Scots being tight is true.....
-
Bally
- E30 Zone Camper
- Posts: 1012
- Joined: Sat Jan 15, 2005 11:00 pm
- Location: Slough
Got to say this is a good deal I bought the PC and a few bits and this kit semms a good deal in addition I have used pro detailing in the past and they offer a great service as well as help and advice
-
Pro-detailing
- E30 Zone Newbie
- Posts: 23
- Joined: Thu Jul 19, 2007 11:00 pm
Separate selling price is £215.80grantfk10 wrote:£175 and then I need to buy a transformer too? I wouldn't say it was "stupidly good" , but if folks want to pay that - fair enough.
Maybe what they say about the Scots being tight is true.....
-£80 for PC/UDM = £135.80
Kit price = £175
-£80 for PC/UDM = £95
£135.80-£95 = £40.80
(£40.80/£135)x100% = MORE THAN 30%
Think of it as a PC/UDM for less than anyone would be likely to be able to get it for, at worst cost price and 30% off the rest.....
I didn't think that was too bad an offer, but that's just me....
-
c76jon
- E30 Zone Camper
- Posts: 1130
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: coventry
I own both of these machines and this is very good value
it amazes me that people go to the trouble of sorting out kits,deals etc and there is always somebody willing to diss them
A lot of time and effort has gone into sorting good kit at these prices
a little respect would go a long way
think what you want..........
just no need to say it.
jon
it amazes me that people go to the trouble of sorting out kits,deals etc and there is always somebody willing to diss them
A lot of time and effort has gone into sorting good kit at these prices
a little respect would go a long way
think what you want..........
just no need to say it.
jon
-
e30den
- E30 Zone Regular
- Posts: 502
- Joined: Fri Jul 27, 2007 11:00 pm
- Location: East Kent
there is always going to be a clueless twat ready ready to get on the negative.
-
sam325is
- E30 Zone Addict
- Posts: 2002
- Joined: Thu Jul 06, 2006 11:00 pm
- Location: Cheltenham
Great to still have your presence on here jon.
-
HartgeH27
- E30 Zone Team Member
- Posts: 21737
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: Chichester
Jonc76jon wrote:I own both of these machines and this is very good value
it amazes me that people go to the trouble of sorting out kits,deals etc and there is always somebody willing to diss them
A lot of time and effort has gone into sorting good kit at these prices
a little respect would go a long way
think what you want..........
just no need to say it.
jon
Totally agree with you, Pro-Detailing are second to none and I believe that this is a great value offer ..............the advice and expertise which comes with the kit (ie support from Nick) is invaluable.
