Hottuning 6 branch

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Tue Feb 19, 2008 11:28 pm

fuzzy wrote:but if theres very little power increase and no difference to the noise then what is the point in these? :?
Pretty much my thoughts..

does sound a little like the chip isnt ideally mapped for either manifold tho
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
march109
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6632
Joined: Sun Aug 20, 2006 11:00 pm
Location: Bournemouth

Post Tue Feb 19, 2008 11:36 pm

Jhonno wrote:
fuzzy wrote:but if theres very little power increase and no difference to the noise then what is the point in these? :?
Pretty much my thoughts..

does sound a little like the chip isnt ideally mapped for either manifold tho
From what I can see on the graph the chip is far more suited to the old manifold, peak figures arn't the whole story. Be interested to see what could be done if ant re writes the chip for the manifold and would be usefull to any other people out there with the same manifold seems a fe poeple over here have them now. I expect the original chip was written with the log manifold in mind since at the time that was the most common option.

I wouldn't buy one of these don't get me wrong, but with proper mapping the manifold would make a decent difference for a decent price, as someone allready said its the area under the graph that counts. It would also improve the look of the bay too.
325i Tech 1 Touring, breaking.

2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
User avatar
Julian_Jules
E30 Zone Newbie
E30 Zone Newbie
Posts: 71
Joined: Tue Jun 07, 2005 11:00 pm

Post Wed Feb 20, 2008 5:59 am

THANK YOU!

Just saw the post - FINALLY someone dared to share with all of us if it was money well spent. And it looks as it was....tho marginally.

Louise should thank you for this.
User avatar
Paynts
E30 Zone Newbie
E30 Zone Newbie
Posts: 135
Joined: Sun Jan 13, 2008 11:00 pm

Post Wed Feb 20, 2008 9:22 am

the other debate to have is Dyno versus Dyno I was a little disapointed in my dyno figures but then I've been told that there are considerable variations in dynos - and thta it is possible to make your dyno optimistic or pessimistic according to how you set it up

It seems that dyno power is dependant on just how you set the dyno, what gear you run the car and what load you set the dyno at and of course what type of dyno -single roller hub coupled dyno or the traditional 2 roller dyno

anyone had there car dynoed on several different set ups?
d6dph
Married to the E30 Zone
Married to the E30 Zone
Posts: 12435
Joined: Sun Aug 14, 2005 11:00 pm
Location: Tiptree. Essex

Post Wed Feb 20, 2008 9:40 am

I personally think a dyno read out should only ever be a guide as there are so many variables.

The best way to use a dyno in my limited opinion is to use it as a way of measuring increases not concrete proof of power. IE a run as a std car gives 160bhp, then a chipped run gives 169bhp on the same dyno you know you have a definite increase.

There is nothing to say that this figure is precisely what the car is making but it does give you a constant test, if you done the std run on one set of rollers, then the chipped run on another there could be wildly different results due to different settings.
Image
ShepsEvo3
Master of go faster
Posts: 1881
Joined: Tue Mar 29, 2005 11:00 pm
Location: Bristol/Wiltshire

Post Wed Feb 20, 2008 11:04 am

Paynts wrote:it is possible to make your dyno optimistic or pessimistic according to how you set it up
That is true of some dyno's but not ours.
E30 M3 Unichip Alpha N style conversions, this is the ultimate for extracting the best out of your S14 M power car.
Also, Live mapping of your Standard Motronic ECU for optimising all your modifications.
www.sabre-tuning.co.uk
1an
E30 Zone Addict
E30 Zone Addict
Posts: 2384
Joined: Sat Oct 28, 2006 11:00 pm
Location: benfleet, essex

Post Wed Feb 20, 2008 1:30 pm

ShepsEvo3 wrote:
Paynts wrote:it is possible to make your dyno optimistic or pessimistic according to how you set it up
That is true of some dyno's but not ours.
Sheps which dyno do you use?
Image

Audi S3 and Racing Puma track car.
ShepsEvo3
Master of go faster
Posts: 1881
Joined: Tue Mar 29, 2005 11:00 pm
Location: Bristol/Wiltshire

Post Wed Feb 20, 2008 1:54 pm

1an wrote:
ShepsEvo3 wrote:
Paynts wrote:it is possible to make your dyno optimistic or pessimistic according to how you set it up
That is true of some dyno's but not ours.
Sheps which dyno do you use?
As per graph on page 1. Dastek :wink:

No, I aint getting into any whats best dyno or results can be fudged, I certainly cannot fudge results. unless you press the brake or something on run down, but why would you?

This was a test for power and torque before and after manifold was changed. Same dyno, different results. Nothing else on the car was changed. Fair test - nothing more or nothing less.
E30 M3 Unichip Alpha N style conversions, this is the ultimate for extracting the best out of your S14 M power car.
Also, Live mapping of your Standard Motronic ECU for optimising all your modifications.
www.sabre-tuning.co.uk
Onz
E30 Zone Regular
E30 Zone Regular
Posts: 836
Joined: Sat Aug 26, 2006 11:00 pm

Post Wed Feb 20, 2008 3:33 pm

i was under the impression that a btb2 design released 18bhp on a standard engine with standard chip
Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Post Wed Feb 20, 2008 5:17 pm

Onz wrote:i was under the impression that a btb2 design released 18bhp on a standard engine with standard chip
believe that and you'll believe anything, not going to happen if it did it's like re inventing the wheel
Onz
E30 Zone Regular
E30 Zone Regular
Posts: 836
Joined: Sat Aug 26, 2006 11:00 pm

Post Wed Feb 20, 2008 5:20 pm

yeah well.... thats what I thought until certain members of this forum repeatedly stated it :)
320Touring
E30 Zone Team Member
E30 Zone Team Member
Posts: 12316
Joined: Fri Feb 11, 2005 11:00 pm
Location: Glasgow (Scotland)

Post Wed Feb 20, 2008 6:50 pm

Simon- Good to see plenty of life in the old girl yet!

and to think, you were gonna part with that car :eek:

Fannymold seems to have made a difference.

just got a quick couple of questions for Paul (and no offence intended paul!not trying to tell you your job :D )

1- Why is the correction facter different?

2- Do you not have any control over the environmental temperature?
The big Unit Parts Clear out Make me an offer on parts!
http://www.e30zone.net/modules.php?name ... 81#2766881
ShepsEvo3
Master of go faster
Posts: 1881
Joined: Tue Mar 29, 2005 11:00 pm
Location: Bristol/Wiltshire

Post Wed Feb 20, 2008 7:08 pm

1 - was cooler the 2nd day, 1st run was done a couple of weeks before. This makes no difference as the dyno compensates.

2 - I have as good a control over the environmental temp as anyone else. But we will have better control once our fan intake is sealed from the dyno room itself. The aim is to keep the room as cool as possible. What does seem to make a difference though is dirty air.

All the runs carried out on the car were done fairly and squarely. The best of before and after runs are shown in the graph... again to be fair (not that there was much difference between the runs)

No offence take, but unless you know how our dyno works, I knew there would be questions like this. :wink:
E30 M3 Unichip Alpha N style conversions, this is the ultimate for extracting the best out of your S14 M power car.
Also, Live mapping of your Standard Motronic ECU for optimising all your modifications.
www.sabre-tuning.co.uk
320Touring
E30 Zone Team Member
E30 Zone Team Member
Posts: 12316
Joined: Fri Feb 11, 2005 11:00 pm
Location: Glasgow (Scotland)

Post Wed Feb 20, 2008 7:14 pm

ShepsEvo3 wrote:1 - was cooler the 2nd day, 1st run was done a couple of weeks before. This makes no difference as the dyno compensates.

2 - I have as good a control over the environmental temp as anyone else. But we will have better control once our fan intake is sealed from the dyno room itself. The aim is to keep the room as cool as possible. What does seem to make a difference though is dirty air.

All the runs carried out on the car were done fairly and squarely. The best of before and after runs are shown in the graph... again to be fair (not that there was much difference between the runs)

No offence take, but unless you know how our dyno works, I knew there would be questions like this. :wink:
Thanks for the straight answers Paul- As you say, I'm no expert.

so thought I'd ask in a nice way.

I dont doubt the runs were done fairly!
playo
E30 Zone Regular
E30 Zone Regular
Posts: 495
Joined: Mon May 22, 2006 11:00 pm
Location: South wales

Post Wed Feb 20, 2008 7:45 pm

A result!

Welldone Si, it's not been a fruitless excercise. :)
ShepsEvo3
Master of go faster
Posts: 1881
Joined: Tue Mar 29, 2005 11:00 pm
Location: Bristol/Wiltshire

Post Wed Feb 20, 2008 8:24 pm

playo wrote:it's not been a fruitless excercise. :)
Well, those bunch of "bananas" under the bonnet look the "nuts" and she certainly sound "peachy" now. :P
E30 M3 Unichip Alpha N style conversions, this is the ultimate for extracting the best out of your S14 M power car.
Also, Live mapping of your Standard Motronic ECU for optimising all your modifications.
www.sabre-tuning.co.uk
ShepsEvo3
Master of go faster
Posts: 1881
Joined: Tue Mar 29, 2005 11:00 pm
Location: Bristol/Wiltshire

Post Wed Feb 20, 2008 8:28 pm

320Touring wrote:Thanks for the straight answers Paul- As you say, I'm no expert.

so thought I'd ask in a nice way.

I dont doubt the runs were done fairly!
Thats ok mate, I can take some stick. :wink:

If you look at the correction factors, its actually less than 100%, so the dyno has compromised for the cold air.

Dyno's like our latest Dastek and Sal's latest Dyno Dynamics are very clever at correcting for power and torque figures.
E30 M3 Unichip Alpha N style conversions, this is the ultimate for extracting the best out of your S14 M power car.
Also, Live mapping of your Standard Motronic ECU for optimising all your modifications.
www.sabre-tuning.co.uk
playo
E30 Zone Regular
E30 Zone Regular
Posts: 495
Joined: Mon May 22, 2006 11:00 pm
Location: South wales

Post Wed Feb 20, 2008 8:39 pm

ShepsEvo3 wrote:
playo wrote:it's not been a fruitless excercise. :)
Well, those bunch of "bananas" under the bonnet look the "nuts" and she certainly sound "peachy" now. :P
Lol!! your killing me :chuckle:
hottuning_eu
E30 Zone Newbie
E30 Zone Newbie
Posts: 212
Joined: Thu Oct 25, 2007 11:00 pm
Location: Belgium

Post Wed Feb 20, 2008 10:14 pm

Hi,

Hopefully you´re happy with this result and dyno of the manifold !!

First f all I thank Simon for his help and testing, hopefully the air is cleared about the manifold !!!

So for the interested zone members, we have the manifolds in stock!

So looking forward doing business :D

Best regards,

Louise
Contact us at sales@hottuning.eu or check our shop at:

**** www.hottuning.co.uk ****



!! OUR CUSTOMER SERVICE IS #1!!
Quaser
E30 Zone Addict
E30 Zone Addict
Posts: 2622
Joined: Sun Jan 09, 2005 11:00 pm
Location: West London

Post Wed Feb 20, 2008 10:17 pm

ShepsEvo3 wrote:I've seen 227.5bhp out of a 2.7.
Who's car was that? winkeye
BMW E30 2.0 Convertible (M52B28)
BMW E30 2.0 2 Door (M20B28 Turbo project to start)
BMW E36 328i Sport (M52B28 Turbo Project)
http://www.e30zone.net/modules.php?name ... ic&t=68663
ShepsEvo3
Master of go faster
Posts: 1881
Joined: Tue Mar 29, 2005 11:00 pm
Location: Bristol/Wiltshire

Post Wed Feb 20, 2008 10:40 pm

Quaser wrote:
ShepsEvo3 wrote:I've seen 227.5bhp out of a 2.7.
Who's car was that? winkeye
Ah mate, you know very well :wink:
E30 M3 Unichip Alpha N style conversions, this is the ultimate for extracting the best out of your S14 M power car.
Also, Live mapping of your Standard Motronic ECU for optimising all your modifications.
www.sabre-tuning.co.uk
Speedtouch
Old Skooler
Old Skooler
Posts: 14130
Joined: Tue Feb 14, 2006 11:00 pm
Location: Canterbury

Post Wed Feb 20, 2008 10:50 pm

hottuning_eu wrote:Hi,

Hopefully you´re happy with this result and dyno of the manifold !!

First f all I thank Simon for his help and testing, hopefully the air is cleared about the manifold !!!

So for the interested zone members, we have the manifolds in stock!

So looking forward doing business :D

Best regards,

Louise
Will there be any discount for Zoners?
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Wed Feb 20, 2008 11:21 pm

18 bhp from a manifold my arse! As Simon says, bullshit baffles brains. I remember a few years ago a guy with a green C2 2.7 with the iron manifold. he came in, had the proper Alpina 6 branch fitted and it made LESS power! :D
Everyone moans about the standard iron manifold but in reality it's really quite good. This Hottuning manifold probably represents as good an increase in power as you're going to get - as Paul says, a bit of fine tweakery on the old ECU and it should give maybe 3-4 bhp more.
ShepsEvo3
Master of go faster
Posts: 1881
Joined: Tue Mar 29, 2005 11:00 pm
Location: Bristol/Wiltshire

Post Wed Feb 20, 2008 11:25 pm

Andyboy wrote: I remember a few years ago a guy with a green C2 2.7 with the iron manifold. he came in, had the proper Alpina 6 branch fitted and it made LESS power! :D
This is my thoughts exactly and why we did the dyno testing.

I have seen many an exhaust system, induction kit, even uprated cams fitted and have dyno'd at less than stock power. This is why I said what I said on the other thread about actually loosing power with these types of manifolds.

Fortunately, we have see a reasonable increase. Certainly more midrange torque, and Simon says he has noticed it feels better than before low down. Obviously this must be with part throttle loads. Live mapped, I wouldn't be suprised if this car will make over 190bhp.
E30 M3 Unichip Alpha N style conversions, this is the ultimate for extracting the best out of your S14 M power car.
Also, Live mapping of your Standard Motronic ECU for optimising all your modifications.
www.sabre-tuning.co.uk
hottuning_eu
E30 Zone Newbie
E30 Zone Newbie
Posts: 212
Joined: Thu Oct 25, 2007 11:00 pm
Location: Belgium

Post Thu Feb 21, 2008 9:00 am

Yes for the zoners will be a discount. We´re planning a groupbuy for the zoners!

Best regards,

Louise
Contact us at sales@hottuning.eu or check our shop at:

**** www.hottuning.co.uk ****



!! OUR CUSTOMER SERVICE IS #1!!
Justin325i
E30 Zone Regular
E30 Zone Regular
Posts: 298
Joined: Tue Jan 11, 2005 11:00 pm

Post Thu Feb 21, 2008 11:48 am

Louise weren't you also testing the manifold, do you have the results yet :?:
Demlotcrew
E30 Zone Team Member
E30 Zone Team Member
Posts: 13329
Joined: Mon Dec 20, 2004 11:00 pm
Location: East Anglia

Post Thu Feb 21, 2008 11:57 am

ShepsEvo3 wrote:
Andyboy wrote: I remember a few years ago a guy with a green C2 2.7 with the iron manifold. he came in, had the proper Alpina 6 branch fitted and it made LESS power! :D
This is my thoughts exactly and why we did the dyno testing.

I have seen many an exhaust system, induction kit, even uprated cams fitted and have dyno'd at less than stock power. This is why I said what I said on the other thread about actually loosing power with these types of manifolds.

Fortunately, we have see a reasonable increase. Certainly more midrange torque, and Simon says he has noticed it feels better than before low down. Obviously this must be with part throttle loads. Live mapped, I wouldn't be suprised if this car will make over 190bhp.
Thats got to be wortht the money?
Onz
E30 Zone Regular
E30 Zone Regular
Posts: 836
Joined: Sat Aug 26, 2006 11:00 pm

Post Thu Feb 21, 2008 12:03 pm

dont mean to go off topic, but how did the magnex manifold look when it was dynoed on a stock motor?
ShepsEvo3
Master of go faster
Posts: 1881
Joined: Tue Mar 29, 2005 11:00 pm
Location: Bristol/Wiltshire

Post Thu Feb 21, 2008 12:26 pm

sansarpur4eva wrote:Louise weren't you also testing the manifold, do you have the results yet :?:
I think you'll find that this was the test :wink:
E30 M3 Unichip Alpha N style conversions, this is the ultimate for extracting the best out of your S14 M power car.
Also, Live mapping of your Standard Motronic ECU for optimising all your modifications.
www.sabre-tuning.co.uk
jack148
E30 Zone Newbie
E30 Zone Newbie
Posts: 195
Joined: Sun Nov 19, 2006 11:00 pm
Location: South wales

Post Thu Feb 21, 2008 12:52 pm

Sorry for going a little off topic, but can you fit this manifold purely for cosmetic reasons. Do you have to have the fueling looked at or is it a straight swop? Not really interested in bhp gains n all :?
HairyScreech
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6265
Joined: Sun Jan 21, 2007 11:00 pm

Post Thu Feb 21, 2008 12:54 pm

you could, i doubt it would hurt as the m20 seems fairly tollerent to the fueling being a little off, if a chip is made for it then i would say together they would be about £350 so that would be a hell of a package togeter and definatly worth doing.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822

m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
march109
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6632
Joined: Sun Aug 20, 2006 11:00 pm
Location: Bournemouth

Post Thu Feb 21, 2008 12:55 pm

jack148 wrote:Sorry for going a little off topic, but can you fit this manifold purely for cosmetic reasons. Do you have to have the fueling looked at or is it a straight swop? Not really interested in bhp gains n all :?
Yes you can, if you don't have a wild chip on your car either it would probably wouldn't over fuel like the one in the test.
325i Tech 1 Touring, breaking.

2.5 high comp. M20, 3.64 LSD, Fully undersealed, Spax springs & Bilstein shocks, s/s exhaust, Alpina rep wheels and more.
jack148
E30 Zone Newbie
E30 Zone Newbie
Posts: 195
Joined: Sun Nov 19, 2006 11:00 pm
Location: South wales

Post Thu Feb 21, 2008 1:11 pm

Thanks for that March. I have a standard set up on a 325 auto cab. Just thinking about going with full stainless exhaust plus headers for cosmetics and sound. All I need is a lottery win!! winkeye

Will keep an eye out for a group buy, if it ever gets started!!

Cheers!!
Justin325i
E30 Zone Regular
E30 Zone Regular
Posts: 298
Joined: Tue Jan 11, 2005 11:00 pm

Post Thu Feb 21, 2008 3:06 pm

ShepsEvo3 wrote:
sansarpur4eva wrote:Louise weren't you also testing the manifold, do you have the results yet :?:
I think you'll find that this was the test :wink:
my bad :o: I thought Louise was doing one seperate.
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Thu Feb 21, 2008 3:12 pm

sansarpur4eva wrote:
ShepsEvo3 wrote:
sansarpur4eva wrote:Louise weren't you also testing the manifold, do you have the results yet :?:
I think you'll find that this was the test :wink:
my bad :o: I thought Louise was doing one seperate.
Far better that we have a result from a zoner than the supplier.I hope to fit mine tomorrow,I have made up my mind on the exhaust system issue and I am going with a standard centre and rear supplied by GSF.The money 'saved' over a Longlife S/S system will help pay for a mapping session after a cylinder head swap...