Evolve Chip January Offer

[M5pilot]

To start off the new year we have our dyno developed and tested chips on offer for January 2008 only.

Any Evolve Chip for the following cars for £40

E30 318iS
E30 320i
E30 325i (pre and post facelift)

Please call us on 01582 584 000 to place your orders.

[eskimo_god]

any gains runnisg the 325 chip in the 320?

[M5pilot]

You should not run a 325i chip in a 320i.

There is a specific chip for the 320i.

[FIREBREATHER60]

Nothing for the poor old M40?

[o22ie]

have you got any chips for the older ecu that doesnt have 28 pins, as i dont like the idea of soldering onto the pcb

[oze30]

540 ecu sal??

[mattyb240]

£40 with delivery? OR just £40+ postage?

Thanks

[ricey46]

Any for the older ECUs with 24 pins?? '86 325i- 0 261 200 073??

[M5pilot]

Older ECU's will need some light modifications.

[M5pilot]

540 ecu sal??

Sorry, not part of the offer.

[ShepsEvo3]

Sal, didn't you get my pm's? I'm after the 318is chip please. Car was built 07/90. You need any more info?

Payment, paypal or card over the phone? Also want to talk suspension and remapping with you.

Paul.

[ShepsEvo3]

[tomstickland]

£40 looks like a bargain to me. What do you claim the chip does?

[M5pilot]

12 bhp. We did some tests recently on a zoners car and have the dyno sheets if required.


Sheps - I'll be in touch very soon, just settling in after a 4+ week holiday!

[tomstickland]

Sounds good to me.

[ShepsEvo3]

Sheps - I'll be in touch very soon, just settling in after a 4+ week holiday!

Thanks Salman, I will pm you my email address referance our conversation this afternoon

[tomstickland]

Do the chips solder in then? How difficult a job is swapping them over? I might obtain a spare ECU.

[mattyb240]

Not a solder job, direct swap for the chip you have in at the moment. Look in the articles sections for a how to guide

[Oversteer]

Sal, didn't you get my pm's? I'm after the 318is chip please. Car was built 07/90. You need any more info?

Payment, paypal or card over the phone? Also want to talk suspension and remapping with you.

Paul.

x2!
Mine was built in 04/1990, chassis number AD18560.

[hongkongfuey]

12 bhp. We did some tests recently on a zoners car and have the dyno sheets if required.

yes please^^^^^


Oversteer
info needed= car/year/ecu number/orig chip number

[tomstickland]

Guide is for the 320/325, I've got a 318iS, but I assume that it's the same.

Personally I think that 12BHP is a bit optimistic, but I shall be finding out soon.

[mattyb240]

Guide is for the 320/325, I've got a 318iS, but I assume that it's the same.

Personally I think that 12BHP is a bit optimistic, but I shall be finding out soon.

Pm agreen, he has an IS on which the chip was mapped for, it was rolling roaded at around 12bhp increase with graphs.

[rob0r]

Does it matter about manufacturing date if I was to use one IS chip on two engines... One engine is a '91, the other is a '89/90

Thanks

[M5pilot]

If the Software number (the number on the chip) is the same then there is no problem. If not then it won't be ideal on one of the cars.

[Oversteer]

Oversteer
info needed= car/year/ecu number/orig chip number

I've emailed Salman, and ordered it already. Thanks!

[tomstickland]

I bought one of these a few months ago. Still haven't fitted it!

[Speedtouch]

Don't be a stick in the mud, get it sorted!

[fingerman]

Any chance of maybe extending this £40 offer to May ?

[StefanAnghel]

Nothing for the poor old M40?

+1

[suzie650]

sorry to hijack, but I sent you a mail concerning a 540 ecu...
Still no reply... Could you look into it, please?
Cheers
Seb

[mccarthy]

how much are these normally as i need to buy one!!

[fingerman]

£75 inc p&p

[sarefeet]

Missed this, How much are they now?

[sarefeet]

do'h, as above thanks!

[mccarthy]

any chance of some sort of group buy on these?