Miller MAF conversion

[Ant]

Due to the massive response to the "midnight madness" the guys from www.millerperformancecars.com have extended their offer price for a few more days.

cost as below :

The new sale prices are 349.99 for the m20 and 369.99 for the m30.

Please contact them directly through the link above,

[Dan318-is]

Somebody please buy one of these and let ant at it with a wideband so we can all sabe our time and money and actually find out if they work!

For that price they ought to really its Ms territory but still somebody has to do it!

[Ant]

Dan, I have one en-route for testing/tweaking, as/if required , assuming all is as it should be, I'll be hopefully representing them in the future as UK disty.

[Dan318-is]

wehay we want posts and readings please!!

[march109]

Common Ant honest answer bang for buck MAF conversion or MS?

Seeing as you may very well soon do both, let us have your honest opinion once tested. Be interested in a value for money opinion on both.

[d6dph]

As we spoke about at Lakeside, If you want my car for testing give me the nod. It's yours as long as you need it (within reason )

[Speedtouch]

Test mine if you like Ant - fitted a few weeks ago and working fine so far; I'm reasonably near your base - let me know!
Cheers,

[Ziggy]

Ant: tell me if I should buy one of these! Or are you gonna be able to match those kind of prices in the future? Seems very chirpy chirpy cheep cheep to me!

[brody]

Most people don't want to use mega squirt just to gain a few extra Horsepower. Mega squirt is for full blown Forced induction systems. And The time it takes to drop in a chip or a MAF is like nothing compared to the lengthy process of mega squirt. Its more of an inconvenience for those who just want a little more RIGHT NOW. Why waste your time?

[Ant]

Common Ant honest answer bang for buck MAF conversion or MS?

Seeing as you may very well soon do both, let us have your honest opinion once tested. Be interested in a value for money opinion on both.

Once I have a unit to test , I may well have an opinion, until then........

I have experience of MAF conversions using a Dastek Unichip, but that would draw unfair comparison at this stage.

[Speedtouch]

Could pop mine over to yours tomorrow or Saturday assuming I don't get snowed in...

[Ant]

Maurice,

Kind of you to offer but I'm stretched with other commitments as it is.

Cheers though, appreciate the gesture.

[Speedtouch]

OK, no problem dude.

[Ziggy]

Anyone: thoughts on use with early Moronic (ie pre-facelift; 073 ecu)? Possible / do Miller do it / would I need to swap to a 173 setup?

[Speedtouch]

E-mail the main man there, Dan Miller and ask. They do ask for your ECU code so it's possible they might!
dan@millerperformancecars.com

[cliffybabe]

i have asked them how much to supply tot he uk awaiting a responce

[brody]

i have asked them how much to supply tot he uk awaiting a responce

We sent you an email, but for everyones reference shipping to the UK is 35 dollars.

Thanks for all the interest and positive comments guys!

-Brody-

[DaveD]

I bought one so I await its arrival with interest....am I going to get away with duty and the dreaded...who knows but at the current exchange rate its got to be a good buy....I hope....

It may not be as good as megasquirt but as i am non technical i can do it myself and Ant is 200 miles away and at 1/3 the price i jumped...let you know when i get the toy on the road

[Speedtouch]

Nice one Dave! With a bit of luck they'll do what they did with mine and mark the box 'Gift'...

[DaveD]

just thought I would let you know

a,,the good news ..my maf has arrived.....less than a week

b.. the bad news.... VAT £20.72 parcelforce clearance fee £ 13.50

[Speedtouch]

Oh well, not so bad; just think of the potential fuel savings - you should find it quite a bit more economical in normal driving!

[dazleeds]

is this purely plug n play?

or do ya have to mess around with software etc to get results???

cheers

[Speedtouch]

It gives you both options!

[dazleeds]

hmmmm

tempting if can plug n play

but letting me near software isnt a good idea

[Speedtouch]

The basic kit is plug & play; you just specify your engine/ECU code, required rev limit (standard is 6,500rpm but you can get 7,000rpm if you prefer) and fuel rating (e.g. 95 RON) and Miller program a chip to suit.

Alternatively, there is a Tuner's kit available if you want to tweak the setup yourself: http://www.millerperformancecars.com/m20tunerskit.html

[DaveD]

hate to be a bit cynical but I only let then know my ecu code on Monday evening and it arrived in the depot yesterday...mind you i did tell them which year

[Speedtouch]

Well, I guess if they're sensible they're geared up for the more common ECU types with plenty of stock available for immediate despatch.

[oguz327]

Any more news on these Ant?

[DaveD]

just a pic of the maf fitted ,,,used maurices instructions and had to cut down an old air-box to use as bracket as they don't come with any other holes for mounting other than the 4 in the front...next step put the chip in

[Speedtouch]

Good going Dave, looks sweet (I particularly like the novel bracket!)

Sadly, someone bought my Miller'd up 325i this weekend - the cheek of it

[buster]

i think i'd have put a standard airbox on.

Looks good though,something id do if i still had the 2.5 in.

[DaveD]

Good going Dave, looks sweet (I particularly like the novel bracket!)

Sadly, someone bought my Miller'd up 325i this weekend - the cheek of it

hope you got a decent price..................as for the bracket....as i said its better than fabricating a new one...and it was free from the breakers..your wiring was a doddle thanks very much it cut out a lot of messing

[Speedtouch]

Yeah, not too bad thanks - musn't grumble. Glad the wiring worked out OK Got the chip in yet?

[DaveD]

tomorrow....if i feel adventurous

[Speedtouch]

Well, I have a spare if you blow it up Best of luck.