Consolidated E30 Dismantling Thread - 316i to 325i Sport & M3...
Moderator: martauto
Hi, looking for a few items and just asking if you have any.
- Red e30 facelift coupe doors
- Red front valance
- Black headlining with sunroof part as well
- Rear lights
- Front Colour coded bumper with no cracks
- Colour coded mirrors (good quality)
Cheers, Luke
- Red e30 facelift coupe doors
- Red front valance
- Black headlining with sunroof part as well
- Rear lights
- Front Colour coded bumper with no cracks
- Colour coded mirrors (good quality)
Cheers, Luke
M52 converted car just added to the roster.


Yes we have one tested blower motor in stock.
Posted where? Send us a PM
Gearknob we can help with, but shift lever we are all out of.
We have only one chrome front pre-facelift bumper in stock
None complete.
We've no panel cuts for that model available.
E30 316i auto coupe build thread here viewtopic.php?f=25&t=273035
We don't have any of those parts right now, sorry.
We've no cabriolet wings available.
- Aaronmclaren
- E30 Zone Newbie

- Posts: 4
- Joined: Thu Jan 23, 2014 11:00 pm
- Location: Cardiff
Hi do you have a complete rear anti roll bar set mines is a 89 e30 2.0l coupe
Sure do, responded in your wanted ad already.Aaronmclaren wrote:Hi do you have a complete rear anti roll bar set mines is a 89 e30 2.0l coupe
Thanks
need a lenght of wires for the electric windows with the connectors on for the switches
Need front two or a set of 4?
front 2 sets think its 10 wires in all with the spade like connectors on the end to connect to switch
just need the wires if you have them please
just need the wires if you have them please
They connect via a connector block, not individual spade terminals. You're not looking the block, if I read right, you just want wires? That's way more labour-intensive than it's worth.
- Brianmoooore
- E30 Zone Team Member

- Posts: 49358
- Joined: Mon Jan 10, 2005 11:00 pm
I've come across dealer fitted front electric windows, where the switches were connected by individual spade connectors. Switches and window mechs. were far inferior in quality to the BMW OE equivalents.sskoda wrote:They connect via a connector block, not individual spade terminals. You're not looking the block, if I read right, you just want wires? That's way more labour-intensive than it's worth.
ok mate not problem i have the blocks but the wires had broke so did only need the wires but understand its more labour intensive than its worthsskoda wrote:They connect via a connector block, not individual spade terminals. You're not looking the block, if I read right, you just want wires? That's way more labour-intensive than it's worth.
i have actually fixed it now so not a problem thank you
We should have both. We'll check now.
Unfortunately neither. Sorry chaps.
-
andye30nut
- E30Zone Contributor
- Posts: 622
- Joined: Mon Apr 16, 2007 11:00 pm
- Location: Airdrie
Tech 1 rear valance?




