Vanos seal change
Moderator: martauto
-
heathy325
- E30 Zone Regular
- Posts: 362
- Joined: Fri Jan 20, 2006 11:00 pm
- Location: Preston
Has anyone done a vanos seal change on there m52 single vanos engine? Going to do mine and just after a guide to do it cheers
-
Supafly
- E30 Zone Regular
- Posts: 559
- Joined: Wed Feb 22, 2006 11:00 pm
I've done one and it was straight forward, if you search for dr vanos there are lots of online guides that walk you through the entire process.
There is another way of doing it which I will also try on my next engine and that is to undo the 5 or 6 10mm (from distant memory) bolts that hold the sproket onto the vanos housing and pull the housing off without disturbing the timing or cam set up. There is a thread about it on here but I'm not sure I bookmarked it.
There is another way of doing it which I will also try on my next engine and that is to undo the 5 or 6 10mm (from distant memory) bolts that hold the sproket onto the vanos housing and pull the housing off without disturbing the timing or cam set up. There is a thread about it on here but I'm not sure I bookmarked it.
-
Supafly
- E30 Zone Regular
- Posts: 559
- Joined: Wed Feb 22, 2006 11:00 pm
What did you do to the spanner, just cut one down? I'll be doing this again soon and would appreciate any tips 
-
DanThe
- E30 Zone Team Member
- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Its the Monkey method, as the guy that posted the info on here first username is Monkey
Some pics in my thread here - http://www.e30zone.net/modules.php?name ... &start=625
Some pics in my thread here - http://www.e30zone.net/modules.php?name ... &start=625
-
Supafly
- E30 Zone Regular
- Posts: 559
- Joined: Wed Feb 22, 2006 11:00 pm
Thank you for the tips and the seals, I'll be buying another set soon Dan 
Heathy325, I bought my seals from DanThe.
Heathy325, I bought my seals from DanThe.