I have been offered a genuine hartge h26 engine in very good condition what kind of money is this engine going for out there
hoggie
hartge h26 engine
Moderator: martauto
-
Rav335uk
- E30 Zone Meets/Events Team
- Posts: 27985
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
- Contact:
Any pics??
Saw this post on the irish forum.
Steve is our resisdent Hartge Nutter, so should be able to help.
Saw this post on the irish forum.
Steve is our resisdent Hartge Nutter, so should be able to help.
If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
e30topless
- E30 Zone Team Member
- Posts: 13598
- Joined: Wed Aug 23, 2006 11:00 pm
- Location: surrounded by scrap
they chuck out around 190BHP if they are fettled right, does it come with the correct ECU?
all that took place was a spiky cam and some porting/head work it's unlikely that it still has the correct head 20 some years later, if it has there will be Hartge markings above the intake,
as for Value thats tricky, if it doesn't have the correct head still and the ECU but in reasonable running condition then it's a £250 B2.5 donk
all that took place was a spiky cam and some porting/head work it's unlikely that it still has the correct head 20 some years later, if it has there will be Hartge markings above the intake,
as for Value thats tricky, if it doesn't have the correct head still and the ECU but in reasonable running condition then it's a £250 B2.5 donk
std 2.5 will do, but to take advantage of the cam & porting, it could either do with the genuine unit or a clone. Steve topless will wax on this.
If the genuine head is still present, it's likely the cam is there too so worth a check. You're looking for something like this:
and if you're lucky, this:
If the genuine head is still present, it's likely the cam is there too so worth a check. You're looking for something like this:
and if you're lucky, this:
Last edited by Barx325i on Fri May 11, 2012 12:12 am, edited 1 time in total.
