Bosch to BMW part numbers?

[Andy325i]

I have a pair of brand new oxygen sensors that came with a breaker (E34 530i V8 1996) The Bosch part number is 0 258 003 231.

How do I cross reference this to a BMW part number so I can find out what other possible models they fit?

Many thanx

Andy

[Brianmoooore]

If they are the ones for the car you have, then just the 530 and 540 : http://bmwfans.info/parts/catalog/11781742023/ although it's likely just to be a difference in cable length between these and many others.

[Andy325i]

Thankyou Brian

Using that Part number, realoem gives it for an E36 M3 (Europe) as well

http://www.realoem.com/bmw/partxref.do? ... showeur=on

Many thanks

[jmc330i]

Thankyou Brian

Using that Part number, realoem gives it for an E36 M3 (Europe) as well

http://www.realoem.com/bmw/partxref.do? ... showeur=on

Many thanks

Only for one of the sensors Andy, from memory for the left cat and its on the 3.0 M3 only. The right hand sensor has a longer wire and the Evo uses sensors with longer wiring, although as Brian says, the sensors themselves are probably the same... I used two of the 'left' sensors listed above for my S50, but the plug/sockets are sided so you can't plug a left into the right and vice versa - I modified the plug to fit as the wire colours are all the same.

[Andy325i]

Just seen this, thankyou James