that kudo's on the exhaust (as if you havent earned enough.!)... it looks like its been made by a pro
My E30 M3 S85 V10 Swap
Moderator: martauto
Glen you are a hero mate, would like very much to call up when she is running to hear it in person
that kudo's on the exhaust (as if you havent earned enough.!)... it looks like its been made by a pro
that kudo's on the exhaust (as if you havent earned enough.!)... it looks like its been made by a pro
A 2 door e30 with 8 cylinders, what could be better 
-
glenn
- Engine Transplant Services
- Posts: 2198
- Joined: Sat Jan 29, 2005 11:00 pm
- Location: blackwood, south wales
no probs ant, anytime.
small update.......
fitted the electronic throttle pedal assembly.
there's 6 wires coming off it that will run to the ecu, i've threaded them behind the carpet
(through the old pedal stop hole)
the fuel system is almost finished.
the e60 m5 has 2 pumps, which are controlled via the ekp module.
this module is found in the e60's boot, and gets information from the ecu, and a fuel pressure sensor (which i've yet to get). the ekp controls the speed of the pumps, depending on how much fuel is needed.
only one pump runs, upto 5000rpm, after 5000rpm, or when full throttle is seen, then both pumps are run.
both pumps, and the filter, with a 6 bar regulator attached to the filter,
are all inside the tank
small update.......
fitted the electronic throttle pedal assembly.
there's 6 wires coming off it that will run to the ecu, i've threaded them behind the carpet
(through the old pedal stop hole)
the fuel system is almost finished.
the e60 m5 has 2 pumps, which are controlled via the ekp module.
this module is found in the e60's boot, and gets information from the ecu, and a fuel pressure sensor (which i've yet to get). the ekp controls the speed of the pumps, depending on how much fuel is needed.
only one pump runs, upto 5000rpm, after 5000rpm, or when full throttle is seen, then both pumps are run.
both pumps, and the filter, with a 6 bar regulator attached to the filter,
are all inside the tank
-
goosiegander
- Zonegoose
- Posts: 2544
- Joined: Sun Nov 19, 2006 11:00 pm
- Location: East Anglia
Any updates?
Lovig this project. It's come on leaps and bounds since I was last on here!
E30 340i project in progress now 328 turbo
Breaking '97 728i Auto box, tubular manifolds and other morsels.
For sale E34 M50 sump, pick up and dip stick. PM for de
Breaking '97 728i Auto box, tubular manifolds and other morsels.
For sale E34 M50 sump, pick up and dip stick. PM for de
-
glenn
- Engine Transplant Services
- Posts: 2198
- Joined: Sat Jan 29, 2005 11:00 pm
- Location: blackwood, south wales
i'm deep into the wiring at the momentgoosiegander wrote:Any updates?
i'm having to check, double check and triple check, before i solder any joints.
i've mounted the ekp module inside the offside rear quarter,
as its near the fuel pumps, and i can pick up +power from the battery nearby.
also, i've got the business end of the engine harness into the cockpit.
i'm gonna mount the ecu behind the center console
i'm currently wiring up the c101 plug, fuel pressure sensor, also, i've had to fit a vacuum pressure sensor on the vacuum pipework.
-
goosiegander
- Zonegoose
- Posts: 2544
- Joined: Sun Nov 19, 2006 11:00 pm
- Location: East Anglia
Updates? 
-
glenn
- Engine Transplant Services
- Posts: 2198
- Joined: Sat Jan 29, 2005 11:00 pm
- Location: blackwood, south wales
none just yet.goosiegander wrote:Updates?
basicly i'm waiting for some stuff to turn up from germany
.i still have some more parts to bolt on, but i didn't want to fit anymore, not until i have the engine running.
From where I'm sitting, you're like MacGyvers instructor.glenn wrote: i'm currently wiring up the c101 plug, fuel pressure sensor, also, i've had to fit a vacuum pressure sensor on the vacuum pipework.
Loving this project while at the same time being sad that it's so clearly beyond the realms of me to attempt something similar.
Can't wait to see some videos of the finished project.
-
ShepsEvo3
- Master of go faster
- Posts: 1881
- Joined: Tue Mar 29, 2005 11:00 pm
- Location: Bristol/Wiltshire
Yeah, Glenn, any updates?
E30 M3 Unichip Alpha N style conversions, this is the ultimate for extracting the best out of your S14 M power car.
Also, Live mapping of your Standard Motronic ECU for optimising all your modifications.
www.sabre-tuning.co.uk
Also, Live mapping of your Standard Motronic ECU for optimising all your modifications.
www.sabre-tuning.co.uk
-
CRACKERS63
- E30 Zone Newbie
- Posts: 10
- Joined: Fri Jan 04, 2013 11:00 pm
very nice project
i do the same on my M3 E30 in few times now i am working on my M3 E46
i do the same on my M3 E30 in few times now i am working on my M3 E46
-
glenn
- Engine Transplant Services
- Posts: 2198
- Joined: Sat Jan 29, 2005 11:00 pm
- Location: blackwood, south wales
next time i get the car up on stands, i'll try and get some pics for you karan. as you can imagine, there's not much room there !Karan wrote:
Do you have any pics of steering column clearance Glenn?
-
CRACKERS63
- E30 Zone Newbie
- Posts: 10
- Joined: Fri Jan 04, 2013 11:00 pm
Good news
Last edited by CRACKERS63 on Thu Feb 14, 2013 4:13 am, edited 3 times in total.
-
CRACKERS63
- E30 Zone Newbie
- Posts: 10
- Joined: Fri Jan 04, 2013 11:00 pm
Perfect the engine could start In few Times
-
CRACKERS63
- E30 Zone Newbie
- Posts: 10
- Joined: Fri Jan 04, 2013 11:00 pm
very nice
we are waiting the first start engine
we are waiting the first start engine
-
glenn
- Engine Transplant Services
- Posts: 2198
- Joined: Sat Jan 29, 2005 11:00 pm
- Location: blackwood, south wales
lol,crossie wrote:expecting a video of this running over the weekend!
i'd like to have it running by the end of the weekend too,
but i suspect i have just a bit too much to do, to have it running by then.....
i'm working until midday tomorrow, then the rugby is on,
but i'll do my best.
Glenn I have a D & K can reader and the right software if u need to plug it in. I am happy to pop up and help for a day in return for a go in the passenger seat and some fuel money ;)
S54, S62, S65 & S85 Plug & Play loom/Ecu Kits
Sump Baffles
Engine Conversion Kits/Parts
TrackDays
Sump Baffles
Engine Conversion Kits/Parts
TrackDays