Bargain Project - Stance sorted - Coilovers Page 3 20-03-09

Show off your pride and joy here

Moderator: martauto

Dan320is
E30 Zone Squatter
E30 Zone Squatter
Posts: 1813
Joined: Wed Jan 12, 2005 11:00 pm
Location: Cambridgeshire

Post Tue Mar 10, 2009 4:37 pm

gareth wrote:get some tools and general shite in the boot and it'll be fine :D

do you have the thicker spring pads on there maybe? it does look a little high :?
Good idea about the spring pads, will give it a go.
Last edited by Dan320is on Fri Mar 20, 2009 4:45 pm, edited 1 time in total.
User avatar
mabz
E30 Zone Squatter
E30 Zone Squatter
Posts: 1583
Joined: Sat May 24, 2008 11:00 pm
Location: cambridgeshire

Post Tue Mar 10, 2009 9:11 pm

fair play!i wouldnt know where to start and if i did id eff it up! when im sorted(get the tech 2 kit on!!!!!!!!!)will pm you and see if we can get a meet on!a trip to bigbavarianbeauties is always a nice run :)
Dan320is
E30 Zone Squatter
E30 Zone Squatter
Posts: 1813
Joined: Wed Jan 12, 2005 11:00 pm
Location: Cambridgeshire

Post Tue Mar 10, 2009 9:37 pm

mabz wrote:fair play!i wouldnt know where to start and if i did id eff it up! when im sorted(get the tech 2 kit on!!!!!!!!!)will pm you and see if we can get a meet on!a trip to bigbavarianbeauties is always a nice run :)
Sounds good to me, I went to their last very cold BBQ. We'll take a run up to the next one :thumb:
Dan320is
E30 Zone Squatter
E30 Zone Squatter
Posts: 1813
Joined: Wed Jan 12, 2005 11:00 pm
Location: Cambridgeshire

Post Fri Mar 20, 2009 4:50 pm

Another update for you all. Got the new suspension set up on, just need to raise the rear a bit as it was touching slightly on bumpy roads and hard accelleration.

Image
Image
Image
Image
Image
Image
Image
Image
Last edited by Dan320is on Fri Mar 20, 2009 4:59 pm, edited 1 time in total.
d6dph
Married to the E30 Zone
Married to the E30 Zone
Posts: 12435
Joined: Sun Aug 14, 2005 11:00 pm
Location: Tiptree. Essex

Post Fri Mar 20, 2009 4:57 pm

Awesome. Looks great Dan. :cool:
Image
punk_sy
E30 Zone Regular
E30 Zone Regular
Posts: 427
Joined: Sun Jan 13, 2008 11:00 pm
Location: nottingham

Post Fri Mar 20, 2009 6:15 pm

looking a lot better on that setup got any piccys of the coil overs ?!
User avatar
paulmitchell1984
E30 Zone Regular
E30 Zone Regular
Posts: 490
Joined: Tue Feb 24, 2009 11:00 pm

Post Fri Mar 20, 2009 7:08 pm

what coilovers did you use an how much if you dont mind me asking, loosks sweet though :D
Image
ImysE30
Married to the E30 Zone
Married to the E30 Zone
Posts: 22478
Joined: Mon Jul 07, 2008 11:00 pm
Location: Derby Massive!!

Post Fri Mar 20, 2009 7:25 pm

Looks awesome now :cool: I need some coilovers 8) :twisted:
Current Fleet:

E30 335i Turbo M3 Convertible Replica
initial_g
E30 Zone Moderator
E30 Zone Moderator
Posts: 975
Joined: Fri Oct 24, 2008 11:00 pm
Location: derby

Post Fri Mar 20, 2009 9:51 pm

Image
:wan: :wan: :wan: :wan: :wan: :wan: :wan: :wan: :wan: :wan: :wan: :wan:
:drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool:
Dan320is
E30 Zone Squatter
E30 Zone Squatter
Posts: 1813
Joined: Wed Jan 12, 2005 11:00 pm
Location: Cambridgeshire

Post Sat Mar 21, 2009 12:22 am

paulmitchell1984 wrote:what coilovers did you use an how much if you dont mind me asking, loosks sweet though :D
No pics as yet as they are coming back off for a few more tweeks and finishing touches (powder coating etc). I bought all the components and made the kit myself (with the help of my welder/fabricator brother winkeye )

I haven't costed everything yet but I bought shocks, threaded sleeves, collars, helper springs etc. Definately no more than £500 all in. As with nearly all coilover kits for the E30, the rear isn't a true coilover - Just a shorter spring on an adjustable perch.
Last edited by Dan320is on Sat Mar 21, 2009 12:26 am, edited 1 time in total.
Dan320is
E30 Zone Squatter
E30 Zone Squatter
Posts: 1813
Joined: Wed Jan 12, 2005 11:00 pm
Location: Cambridgeshire

Post Sat Mar 21, 2009 12:24 am

initial_g wrote:Image
:wan: :wan: :wan: :wan: :wan: :wan: :wan: :wan: :wan: :wan: :wan: :wan:
:drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool:
Thanks mate, this suspension and wheel package would look awesome on the nato machine! But I do admire the look you have already.
ImysE30
Married to the E30 Zone
Married to the E30 Zone
Posts: 22478
Joined: Mon Jul 07, 2008 11:00 pm
Location: Derby Massive!!

Post Sat Mar 21, 2009 12:26 am

I bought all the components and made the kit myself
Where did you get the components from?
Current Fleet:

E30 335i Turbo M3 Convertible Replica
Dan320is
E30 Zone Squatter
E30 Zone Squatter
Posts: 1813
Joined: Wed Jan 12, 2005 11:00 pm
Location: Cambridgeshire

Post Sat Mar 21, 2009 12:30 am

ImysE30 wrote:
I bought all the components and made the kit myself
Where did you get the components from?
Some parts from rally design (threaded sleeves) and a local engineering supplies company (all hardware inc stainless nuts & bolts etc).

It takes a long time to get everything set up perfectly straight and to counter measure the pull/distortion from welding the threaded sleeve to the strut.
ImysE30
Married to the E30 Zone
Married to the E30 Zone
Posts: 22478
Joined: Mon Jul 07, 2008 11:00 pm
Location: Derby Massive!!

Post Sat Mar 21, 2009 12:39 am

Dan325iSport wrote:
ImysE30 wrote:
I bought all the components and made the kit myself
Where did you get the components from?
Some parts from rally design (threaded sleeves) and a local engineering supplies company (all hardware inc stainless nuts & bolts etc).

It takes a long time to get everything set up perfectly straight and to counter measure the pull/distortion from welding the threaded sleeve to the strut.
Sound's like hardwork but just what i need for my car.

These parts?

http://www.rallydesign.co.uk/index.php?cPath=1358
Current Fleet:

E30 335i Turbo M3 Convertible Replica
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Sat Mar 21, 2009 12:28 pm

Moar lower in front!!!

Looking good dude!
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
Dan320is
E30 Zone Squatter
E30 Zone Squatter
Posts: 1813
Joined: Wed Jan 12, 2005 11:00 pm
Location: Cambridgeshire

Post Sat Mar 21, 2009 1:15 pm

ImysE30 wrote:
Dan325iSport wrote:
ImysE30 wrote: Where did you get the components from?
Some parts from rally design (threaded sleeves) and a local engineering supplies company (all hardware inc stainless nuts & bolts etc).

It takes a long time to get everything set up perfectly straight and to counter measure the pull/distortion from welding the threaded sleeve to the strut.
Sound's like hardwork but just what i need for my car.

These parts?

http://www.rallydesign.co.uk/index.php?cPath=1358
Yep, they're the bits you need.
Dan320is
E30 Zone Squatter
E30 Zone Squatter
Posts: 1813
Joined: Wed Jan 12, 2005 11:00 pm
Location: Cambridgeshire

Post Sat Mar 21, 2009 1:16 pm

Jhonno wrote:Moar lower in front!!!

Looking good dude!
It's going to come down on the front and I'm going to lift the rear slightly.