cab suspension

Need technical Q/A then you're in the right place

Moderator: martauto

seanboy
E30 Zone Regular
E30 Zone Regular
Posts: 642
Joined: Mon Aug 21, 2006 11:00 pm
Location: Beckenham

Post Mon Jan 29, 2007 11:23 pm

I bought my 325 cab which was already lowered. Thought it sat to low at the back. Want to change the springs? Someone was telling me if they put lowered coupe springs in A cab it will sit lower than it should be because off the extra weight in chassis and hood?
kam-325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 4851
Joined: Tue Sep 27, 2005 11:00 pm
Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!

Post Mon Jan 29, 2007 11:24 pm

Thats right.

-40mm coupe springs is around -50/60mm on a cab.
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
Image
seanboy
E30 Zone Regular
E30 Zone Regular
Posts: 642
Joined: Mon Aug 21, 2006 11:00 pm
Location: Beckenham

Post Mon Jan 29, 2007 11:27 pm

My cab is proper low at the moment. measured the height in the bmw manual to what it is now and got A 80mm difference. Is this the right way of measuring height differnce?
kam-325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 4851
Joined: Tue Sep 27, 2005 11:00 pm
Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!

Post Mon Jan 29, 2007 11:37 pm

I think most people measure from the centre of the wheel arch to the ground.

But BMW spec is 1380mm from the floor to the apex of roof.....
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
Image