please lock, now going in engine swaps section. thanks
Moderator: martauto
-
tomson
- E30 Zone Addict

- Posts: 3598
- Joined: Sun Nov 06, 2005 11:00 pm
- Location: Bristol
Last edited by tomson on Sun Jan 14, 2007 1:48 pm, edited 2 times in total.
-
Wilson325i
- E30 Zone Camper

- Posts: 1184
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Here in SE
*i stand to be corrected*
the most important is the, shells, bearings,oil pump (a must if doing a bottom end) piston rings and go over the rest like have a look at the crank what state it is in, but if there was anything wrong with it in the first place you would have known about it, same as the pistons LOL.
the most important is the, shells, bearings,oil pump (a must if doing a bottom end) piston rings and go over the rest like have a look at the crank what state it is in, but if there was anything wrong with it in the first place you would have known about it, same as the pistons LOL.
-
Speedtouch
- Old Skooler

- Posts: 14130
- Joined: Tue Feb 14, 2006 11:00 pm
- Location: Canterbury
Gasket set is pretty important!
Maybe some Blue Hylomar too...
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
-
tomson
- E30 Zone Addict

- Posts: 3598
- Joined: Sun Nov 06, 2005 11:00 pm
- Location: Bristol
Thats what i basically have on the list, just making sure ive not missed anything!Wilson325i wrote:*i stand to be corrected*
the most important is the, shells, bearings,oil pump (a must if doing a bottom end) piston rings and go over the rest like have a look at the crank what state it is in, but if there was anything wrong with it in the first place you would have known about it, same as the pistons LOL.
