Where should the needle sit in the temp guage? Mine never strays far from the blue area and i think the hot air blower should be hotter, it takes ages to clear me windows.
Could my thermostat be stuck open?
Or is this how it should be?
318is underheating
Moderator: martauto
- m7roadrunner
- E30 Zone Newbie

- Posts: 25
- Joined: Tue May 01, 2007 11:00 pm
- Location: ireland
Thats spot on lads, looks like a visit to gsf is on the cards, do i have to get anything else to do the job (gasket,o-ring,etc.)?
This might work out cheaper than a jumper yet!
This might work out cheaper than a jumper yet!
-
Sanchez
- Married to the E30 Zone

- Posts: 7578
- Joined: Sun Apr 17, 2005 11:00 pm
- Location: Sunny Scotland
thermostat
oring(should come with)
and a new thermostat housing gasket.
drain rad
remove both thermostat housing pipes.
undo the housing 4*10mm bolts.
pull housing away
pull out thermostat
clean and refitt.
oring(should come with)
and a new thermostat housing gasket.
drain rad
remove both thermostat housing pipes.
undo the housing 4*10mm bolts.
pull housing away
pull out thermostat
clean and refitt.


