Guernay flaps...
Moderator: martauto
-
f13ldy
- E30 Zone Newbie

- Posts: 72
- Joined: Mon Jul 17, 2006 11:00 pm
Do these fit the standard M3 rear spoiler?
-
c76jon
- E30 Zone Camper

- Posts: 1130
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: coventry
you could if you wanted but it involves screwing thru it into spoiler and they ahve been known to get ripped off by wind at speed due to incorrect fixing
if you look at sport evo rear spoiler you will see the cut out thats in it to allow travel and adjustment and the correct threaded holes for the correct fixings

if you look at sport evo rear spoiler you will see the cut out thats in it to allow travel and adjustment and the correct threaded holes for the correct fixings


-
f13ldy
- E30 Zone Newbie

- Posts: 72
- Joined: Mon Jul 17, 2006 11:00 pm
And how much would a 2nd sport evo spoiler set me back?
More expense lol.
More expense lol.
-
c76jon
- E30 Zone Camper

- Posts: 1130
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: coventry
oem they are very very rare 2nd hand tho do appear
new about 700 plus
you can buy copies tho there is some shite around
carbon fibre ones are available
i know a good contact for these you can paint them or leave to show weave but again theres different ends of quality scale.the guy i know supplies totally perfect copies with amazing carbon finish
simon has a guerney on his car from the same guy
jon
new about 700 plus
you can buy copies tho there is some shite around
carbon fibre ones are available
i know a good contact for these you can paint them or leave to show weave but again theres different ends of quality scale.the guy i know supplies totally perfect copies with amazing carbon finish
simon has a guerney on his car from the same guy
jon

-
Nelly
- Gumbo

- Posts: 4239
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Divorce Central
-
maxfield
- Old Skooler

- Posts: 15185
- Joined: Sat Nov 26, 2005 11:00 pm
- Location: Mansfield

-
c76jon
- E30 Zone Camper

- Posts: 1130
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: coventry
yes markus
the quality is unreal and im a fussy fecker
the pic above is of his car and his carbon flap
jon

-
M3BOB
- E30 Zone Newbie

- Posts: 158
- Joined: Sat Jul 09, 2005 11:00 pm
- Location: Kent
I you want to see one Track M3s, ask him and he'll let you see one, the guy that does our f/g is good, and we are sending the stuff worldwide now. Rear se spoiler with gurney flap £100
-
Nelly
- Gumbo

- Posts: 4239
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Divorce Central
-
M3BOB
- E30 Zone Newbie

- Posts: 158
- Joined: Sat Jul 09, 2005 11:00 pm
- Location: Kent
ive just posted a list of our parts in the e30 parts for sale section
-
f13ldy
- E30 Zone Newbie

- Posts: 72
- Joined: Mon Jul 17, 2006 11:00 pm
LOL...M3BOB wrote:ive just posted a list of our parts in the e30 parts for sale section
I'm assuming you're the same bob I emailed the other day about the EVOII splitter.
-
M3BOB
- E30 Zone Newbie

- Posts: 158
- Joined: Sat Jul 09, 2005 11:00 pm
- Location: Kent
f13ldy wrote:LOL...M3BOB wrote:ive just posted a list of our parts in the e30 parts for sale section
I'm assuming you're the same bob I emailed the other day about the EVOII splitter.
thatll be me
-
m3ben05
- E30 Zone Addict

- Posts: 2555
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: High Wycombe
-
Falkster
- Engaged to the E30 Zone

- Posts: 5787
- Joined: Fri Sep 30, 2005 11:00 pm
- Location: Yorkshire
I bought one from Martin (TrackM3) and its great.....80 quid posted I paid I think!!!
-
Demlotcrew
- E30 Zone Team Member

- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia
Well im trying to get in touch with M3bob for a SE undertray as i hope to adapt it to fit my car (hartge front valance and SE undertray)
Andrew
Andrew
-
M3BOB
- E30 Zone Newbie

- Posts: 158
- Joined: Sat Jul 09, 2005 11:00 pm
- Location: Kent
m3 bobs email is bob.hassan@virgin.net
-
harry_p
- Engaged to the E30 Zone

- Posts: 5313
- Joined: Thu Oct 12, 2006 11:00 pm
- Location: norfolk
i have seen a pic of a carbon flap designed specifically for the non se wing, it's a kind of V shape so extends slightly over the top edge of the rear of the wing to make it secure. no idea where it cae from, or where you would get one. plus it would be non adjustable, and from memory sat higher than the se wing in its most upright position.
i have also seen a proper se flap attached to a standard m3 wing. looks a bit odd as the wing doesnt have the cutouts for it so doesnt sit flush, is non adjustable ad means its just screwed into the plastic wing. i'd be woried about it coming loose.
i have an SE copy wing bought from TrackM3, the quality for the money is really very good, moulded from the real thing, you can still read the bmw part numbers on both the flap and the wing, plus all the bolt holes are proper metal threaded inserts bonded into the wing. i prepped and sprayed mine myself in an afternoon using aerosols so it's not 100% perfect, but i have no doubt that a half decent bodyshop would be able to do a fantastic job with little more than a coat of filler primer and a rubdown before paint


i have also seen a proper se flap attached to a standard m3 wing. looks a bit odd as the wing doesnt have the cutouts for it so doesnt sit flush, is non adjustable ad means its just screwed into the plastic wing. i'd be woried about it coming loose.
i have an SE copy wing bought from TrackM3, the quality for the money is really very good, moulded from the real thing, you can still read the bmw part numbers on both the flap and the wing, plus all the bolt holes are proper metal threaded inserts bonded into the wing. i prepped and sprayed mine myself in an afternoon using aerosols so it's not 100% perfect, but i have no doubt that a half decent bodyshop would be able to do a fantastic job with little more than a coat of filler primer and a rubdown before paint


-
f13ldy
- E30 Zone Newbie

- Posts: 72
- Joined: Mon Jul 17, 2006 11:00 pm
That looks sweet!
Although being f/g have you noticed any cracking?
Although being f/g have you noticed any cracking?
-
harry_p
- Engaged to the E30 Zone

- Posts: 5313
- Joined: Thu Oct 12, 2006 11:00 pm
- Location: norfolk
nope, doesnt seem to have cracked or crazed, and is probably more resistant to it than the standard rear wing, most of which seem to have horrible paint cracks by now (mine was just starting to go in a couple of places but i've seen lots far worse)
the complete wing weighs probably half as much as a standard one too, the boot now springs open, and the allen bolts they supply to attach the flap are nice stainless steel ones too.
the complete wing weighs probably half as much as a standard one too, the boot now springs open, and the allen bolts they supply to attach the flap are nice stainless steel ones too.
-
harry_p
- Engaged to the E30 Zone

- Posts: 5313
- Joined: Thu Oct 12, 2006 11:00 pm
- Location: norfolk
£100
would have prefered a proper sport evo one, but couldnt find one for even half reasonable money, and you'd still have to add prep and paint costs on top.
would have prefered a proper sport evo one, but couldnt find one for even half reasonable money, and you'd still have to add prep and paint costs on top.
-
f13ldy
- E30 Zone Newbie

- Posts: 72
- Joined: Mon Jul 17, 2006 11:00 pm
Blimey thats cheap...
Is that including the flap? As I wanna get one of those carbon ones from Markus.
Is that including the flap? As I wanna get one of those carbon ones from Markus.
-
c76jon
- E30 Zone Camper

- Posts: 1130
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: coventry
for 100 pounds its good value..........
but the surfaces on that are all over the place with all due respect
the highlights show the highs and lows and leading edge would need a lot of work
to get that perfect or as good as oem it would take a lot of work
jon
but the surfaces on that are all over the place with all due respect
the highlights show the highs and lows and leading edge would need a lot of work
to get that perfect or as good as oem it would take a lot of work
jon

-
Andy335Touring
- Married to the E30 Zone

- Posts: 7144
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Long Eaton,Nottingham
I think it's just the Zones auto re-sizing of the picture thats making it look ify ??c76jon wrote:
but the surfaces on that are all over the place with all due respect
the highlights show the highs and lows and leading edge would need a lot of work
to get that perfect or as good as oem it would take a lot of work
jon
http://img.photobucket.com/albums/v31/i ... 20_700.jpg
-
c76jon
- E30 Zone Camper

- Posts: 1130
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: coventry
i can accept that on edges but it wont alter the reflective highlights on surfaces
jon
jon

-
Chris-W
- E30 Zone Team Member

- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire
-
c76jon
- E30 Zone Camper

- Posts: 1130
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: coventry
my point being you get what you pay for
in its day a 30k plus car
whats that in todays terms??
by all means push the boat out and throw a oner at it ....
i think the car deserves more
and i think its only right to illustrate that this wont be the same as oem
jon
in its day a 30k plus car
whats that in todays terms??
by all means push the boat out and throw a oner at it ....
i think the car deserves more
and i think its only right to illustrate that this wont be the same as oem
jon

-
harry_p
- Engaged to the E30 Zone

- Posts: 5313
- Joined: Thu Oct 12, 2006 11:00 pm
- Location: norfolk
i did say it would need work to be perfect, i also pointed out that its good value. i've seen some of the shit that max power type bodykit people churn out.
i didnt buy an M3 because theyre rare, or were expensive when new. I bought it to DRIVE and enjoy driving. my car is never going to be a concourse winner, and frankly i don't care, therefore the wing looking 100% perfect oem doesnt concern me in the slightest.
f13ldy, yes, that was complete. wing plus flap and bolts. although i'm not 100% sure thats the current price. Maybe they would do it cheaper without the flap too?
i didnt buy an M3 because theyre rare, or were expensive when new. I bought it to DRIVE and enjoy driving. my car is never going to be a concourse winner, and frankly i don't care, therefore the wing looking 100% perfect oem doesnt concern me in the slightest.
f13ldy, yes, that was complete. wing plus flap and bolts. although i'm not 100% sure thats the current price. Maybe they would do it cheaper without the flap too?
-
m3ben05
- E30 Zone Addict

- Posts: 2555
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: High Wycombe
-
c76jon
- E30 Zone Camper

- Posts: 1130
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: coventry
accepted but the fact you dont care when you are DRIVING your car doesnt mean that perspective buyers of said rear spoiler feel the same and its only fair they are aware that this will be substandardharry_p wrote:i did say it would need work to be perfect, i also pointed out that its good value. i've seen some of the shit that max power type bodykit people churn out.
i didnt buy an M3 because theyre rare, or were expensive when new. I bought it to DRIVE and enjoy driving. my car is never going to be a concourse winner, and frankly i don't care, therefore the wing looking 100% perfect oem doesnt concern me in the slightest.
f13ldy, yes, that was complete. wing plus flap and bolts. although i'm not 100% sure thats the current price. Maybe they would do it cheaper without the flap too?
jon

-
f13ldy
- E30 Zone Newbie

- Posts: 72
- Joined: Mon Jul 17, 2006 11:00 pm
No-one would buy mine anyway lol...




