Favourite alloys?

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

jmc330i
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6621
Joined: Mon Jan 10, 2005 11:00 pm
Location: Somerset

Post Wed Apr 25, 2012 2:50 pm

bab-91 wrote:
ross_jsy wrote: With the throwing star wheel trim on an e30:
Hmm after thinking on it I still prefer the style 15's .

Image
What's size are those?
James
'91 325i Sport
'93 318i touring 16v
bab-91
Married to the E30 Zone
Married to the E30 Zone
Posts: 7174
Joined: Thu Jan 06, 2011 11:00 pm
Location: Northern Ireland

Post Wed Apr 25, 2012 2:51 pm

jmc330i wrote: What's size are those?
16"
jmc330i
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6621
Joined: Mon Jan 10, 2005 11:00 pm
Location: Somerset

Post Wed Apr 25, 2012 2:55 pm

Hmm, off what car?

I got the 15" version (from E34 I think) on my Sport as winter wheels, and yes, mega easy to clean :D
James
'91 325i Sport
'93 318i touring 16v
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Wed Apr 25, 2012 2:57 pm

7 Series iirc.
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
User avatar
verde
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5438
Joined: Thu Aug 25, 2011 11:00 pm
Location: The Sticks

Post Wed Apr 25, 2012 2:59 pm

deep bbs rs or borbets. just anything deep and euro friendly
Marrakesh brown tech 2 LSx loading.....
Raise hell praise Dale.
North East Drift Club - Hollerboys Drift
bab-91
Married to the E30 Zone
Married to the E30 Zone
Posts: 7174
Joined: Thu Jan 06, 2011 11:00 pm
Location: Northern Ireland

Post Wed Apr 25, 2012 3:06 pm

jmc330i wrote:Hmm, off what car?

I got the 15" version (from E34 I think) on my Sport as winter wheels, and yes, mega easy to clean :D
They are off a Bmw E38 725? I think

Image
suhinaffy
E30 Zone Regular
E30 Zone Regular
Posts: 355
Joined: Tue Jul 06, 2010 11:00 pm
Location: Fife

Post Wed Apr 25, 2012 3:14 pm

Mim 1900's are my favourite E30 alloys.

Image

Image
jmc330i
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6621
Joined: Mon Jan 10, 2005 11:00 pm
Location: Somerset

Post Wed Apr 25, 2012 3:15 pm

Yup, got em. E38 :thumb:
Realoem was being slow on my phone.

Hmm, now where do I find a set and do I really need them?? I got the 16x8 style 5s, but these would be ideal for winter use :D
James
'91 325i Sport
'93 318i touring 16v
User avatar
Smithy89
E30 Zone Newbie
E30 Zone Newbie
Posts: 35
Joined: Sat Dec 04, 2010 11:00 pm

Post Wed Apr 25, 2012 3:34 pm

16'' 9j borbet A's
pony
I have been misbehaving and am sorry !
Posts: 6620
Joined: Sat Feb 11, 2006 11:00 pm
Location: London

Post Wed Apr 25, 2012 4:05 pm

I got to say the original BMW 15 inch BBS alloys for me looks the best :D .

Those E36 M3 Evo alloys dont suit a E30 IMO.

Those turbine alloys look pretty cool though werent they only available on the E34 M5 3.6 litre? :?
ross_jsy wrote:Hmm can't say I'm keen. Look too much like oversized bottle tops.

Turbines have the advantage of brake cooling winkeye
Btw how do the turbines help brake cooling do they just suck air on through the alloy like a fan?

Is that not similar to those alloys often found on Porsche 993s in terms of FUNCTION

Example:

http://media.photobucket.com/image/Pors ... rsche1.jpg
Rav335uk
E30 Zone Meets/Events Team
E30 Zone Meets/Events Team
Posts: 27978
Joined: Wed Jan 19, 2005 11:00 pm
Location: Mad mad mad

Post Wed Apr 25, 2012 4:18 pm

macas wrote:Them splitty hartge rimzzzz that rav has(thats the best description i can give,dont know model numbers!) :D
winkeye

Image

Image
Image
If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Wed Apr 25, 2012 4:21 pm

pony wrote:I got to say the original BMW 15 inch BBS alloys for me looks the best :D .

Those E36 M3 Evo alloys dont suit a E30 IMO.
What E36 Evo alloys?
pony wrote:Those turbine alloys look pretty cool though werent they only available on the E34 M5 3.6 litre? :?
Turbines were M5 only, Throwing stars were E31 also.
pony wrote:
ross_jsy wrote:Hmm can't say I'm keen. Look too much like oversized bottle tops.

Turbines have the advantage of brake cooling winkeye
Btw how do the turbines help brake cooling do they just suck air on through the alloy like a fan?

Is that not similar to those alloys often found on Porsche 993s in terms of FUNCTION

Example:

http://media.photobucket.com/image/Pors ... rsche1.jpg
The Turbines/Throwing stars draw air into the wheel yes.
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
bab-91
Married to the E30 Zone
Married to the E30 Zone
Posts: 7174
Joined: Thu Jan 06, 2011 11:00 pm
Location: Northern Ireland

Post Wed Apr 25, 2012 4:22 pm

jmc330i wrote:Yup, got em. E38 :thumb:
Realoem was being slow on my phone.

Hmm, now where do I find a set and do I really need them?? I got the 16x8 style 5s, but these would be ideal for winter use :D
I got mine on the german bay and nobody "NEEDS" a spare set. I got mine because I was planning on putting snow tyres on them for going to Austria :mad:
ross_jsy
Married to the E30 Zone
Married to the E30 Zone
Posts: 7307
Joined: Sun Jul 12, 2009 11:00 pm
Location: Jersey, C.I.

Post Wed Apr 25, 2012 4:24 pm

pony wrote: Those turbine alloys look pretty cool though werent they only available on the E34 M5 3.6 litre? :?
Yes, that is why they are rare.
pony wrote:
ross_jsy wrote:Hmm can't say I'm keen. Look too much like oversized bottle tops.

Turbines have the advantage of brake cooling winkeye
Btw how do the turbines help brake cooling do they just suck air on through the alloy like a fan?

Is that not similar to those alloys often found on Porsche 993s in terms of FUNCTION

Example:

http://media.photobucket.com/image/Pors ... rsche1.jpg
Image

Notice the black fan blade?

The throwing start wheel trims don't feature the fan. While not as efficient as the turbine covers they do still produce a suction effect.
User avatar
harry_p
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5313
Joined: Thu Oct 12, 2006 11:00 pm
Location: norfolk

Post Wed Apr 25, 2012 4:55 pm

pony wrote:I got to say the original BMW 15 inch BBS alloys for me looks the best :D .

Those E36 M3 Evo alloys dont suit a E30 IMO.

Those turbine alloys look pretty cool though werent they only available on the E34 M5 3.6 litre? :?
ross_jsy wrote:Hmm can't say I'm keen. Look too much like oversized bottle tops.

Turbines have the advantage of brake cooling winkeye
Btw how do the turbines help brake cooling do they just suck air on through the alloy like a fan?

Is that not similar to those alloys often found on Porsche 993s in terms of FUNCTION

Example:

http://media.photobucket.com/image/Pors ... rsche1.jpg
Image

And they're side specific so lh fans and covers are angled the opposite way to the rh.

Throwing stars don't give as much of a cooling effect, but they are lighter, and again side specific so you get the same cooling effect on both sides. Which is one way to spot replicas as the spokes on all 4 wheels will face the same way.

The turbines were only used on the early 3.6 m5s, and we're soon changed for the throwing star design as a lot of people didn't really like the hubcap looks. Personally, that's why I love them!
cheers,

harry
kieran325
Old Skooler
Old Skooler
Posts: 5015
Joined: Sun Oct 30, 2005 11:00 pm

Post Wed Apr 25, 2012 5:46 pm

I want a set of turbines :P
pony
I have been misbehaving and am sorry !
Posts: 6620
Joined: Sat Feb 11, 2006 11:00 pm
Location: London

Post Wed Apr 25, 2012 6:05 pm

harry_p wrote:
pony wrote:I got to say the original BMW 15 inch BBS alloys for me looks the best :D .

Those E36 M3 Evo alloys dont suit a E30 IMO.

Those turbine alloys look pretty cool though werent they only available on the E34 M5 3.6 litre? :?
ross_jsy wrote:Hmm can't say I'm keen. Look too much like oversized bottle tops.

Turbines have the advantage of brake cooling winkeye
Btw how do the turbines help brake cooling do they just suck air on through the alloy like a fan?

Is that not similar to those alloys often found on Porsche 993s in terms of FUNCTION

Example:

http://media.photobucket.com/image/Pors ... rsche1.jpg
Image

And they're side specific so lh fans and covers are angled the opposite way to the rh.

Throwing stars don't give as much of a cooling effect, but they are lighter, and again side specific so you get the same cooling effect on both sides. Which is one way to spot replicas as the spokes on all 4 wheels will face the same way.

The turbines were only used on the early 3.6 m5s, and we're soon changed for the throwing star design as a lot of people didn't really like the hubcap looks. Personally, that's why I love them!
That is beautiful :D .

I love the way the engineers paid so much attention to detail :D .

Why is this technology or an improved version NOT incorporated in the latest BMW M cars? I am guessing the alloys are dictated by the "styling" department :? .

Also slightly off topic (so apologies to OP).......with respect to brakes and brake bias.....this got me curious

does this mean the more holes in cross-drilled brake discs the worse the braking performance in the dry (though it helps in the wet by disappating water on the discs as water vapour)?

how is the overall brake bias/brake balance in general set up in road cars.....do they just take some kind of average......i noticed in F1 the drivers adjust the brake balance ALOT?

PS
@JHonno I got confused the "throwing stars" alloys u mentioned are found on the 8 Series......i thought they were the same/similar ones found on E36 M3 Evolution models.

I am little surprised the "throwing stars" which is basically shaped like a big fan seems to generate less cooling than the turbines given the black fan blade in the turbine "looks" smaller than the throwing star alloy :? ?
User avatar
harry_p
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5313
Joined: Thu Oct 12, 2006 11:00 pm
Location: norfolk

Post Wed Apr 25, 2012 6:24 pm

Brake bias on road cars is set up to be on the safe side, I.e set to lock the front wheels first whatever the expected load or road conditions. It helps that bmws are well balanced from the factory and loads evenly distributed.

Most hatchbacks or fwd cars have a rear end that's pretty light, but gains more as a proportion when fully loaded, so tend to have a proportioning valve attached to the rear suspension somewhere so when the back is light the rear brakes do very little, but when the car's heavier it opens allowing more fluid through and increasing effort.

As for drilled disks, technically you lose surface area and hence braking effort, but the holes improve cooling so you can use the brakes harder for longer without overheating.
cheers,

harry
pony
I have been misbehaving and am sorry !
Posts: 6620
Joined: Sat Feb 11, 2006 11:00 pm
Location: London

Post Wed Apr 25, 2012 6:43 pm

harry_p wrote:Brake bias on road cars is set up to be on the safe side, I.e set to lock the front wheels first whatever the expected load or road conditions. It helps that bmws are well balanced from the factory and loads evenly distributed.

Most hatchbacks or fwd cars have a rear end that's pretty light, but gains more as a proportion when fully loaded, so tend to have a proportioning valve attached to the rear suspension somewhere so when the back is light the rear brakes do very little, but when the car's heavier it opens allowing more fluid through and increasing effort.

As for drilled disks, technically you lose surface area and hence braking effort, but the holes improve cooling so you can use the brakes harder for longer without overheating.
Ah Nice one thanks Harry_P :D

This fits nicely from what I have read from several different sources over the years that road cars in general are setup to a little understeer in their chassis to be on the conservative side.

I just found out today on the FIA F1 website F1 cars.....are the opposite....so in general the chassis is set up for a little oversteer to help point the car in cornering so with the turn in phase of "cornering".
Blitz
Married to the E30 Zone
Married to the E30 Zone
Posts: 11151
Joined: Mon Jan 30, 2006 11:00 pm
Location: East London+Basildon

Post Wed Apr 25, 2012 6:44 pm

M System I wheels are so cool. I need to get a set to keep.
User avatar
mwggriffiths
E30 Zone Newbie
E30 Zone Newbie
Posts: 156
Joined: Mon Nov 14, 2011 11:00 pm
Location: Solihull

Post Wed Apr 25, 2012 6:52 pm

Some more Turbine love:

Image

Image

Image

Image

Image

Image
harry_p wrote:Brake bias on road cars is set up to be on the safe side, I.e set to lock the front wheels first whatever the expected load or road conditions.
Its not just "safe" its a legal requirement for all new production cars (Part of ECE 13H) to lock the front wheels first, in ALL loading conditions :)
Image
1990 318iS, 1998 E36 328i Touring, 2001 740i Sport, 1971 Range Rover
Dezzy
CR24v it's a lifestyle
Posts: 11974
Joined: Thu May 15, 2008 11:00 pm
Location: Middlesbrough

Post Wed Apr 25, 2012 7:42 pm

16" Hartge for me!!!

Image
Image
Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
G-Bear
E30 Zone Squatter
E30 Zone Squatter
Posts: 1631
Joined: Wed Mar 12, 2008 11:00 pm
Location: Hertfordshire

Post Wed Apr 25, 2012 8:28 pm

Dezzy... I think your car (above) has become my favourite e30's I've seen.... It's bad to the bone...
adamski80
E30 Zone Regular
E30 Zone Regular
Posts: 722
Joined: Tue Feb 24, 2009 11:00 pm
Location: kings lynn / essex

Post Wed Apr 25, 2012 8:39 pm

Dezzy wrote:16" Hartge for me!!!

Image
Same as above without doubt
User avatar
aimlessrock
E30 Zone Squatter
E30 Zone Squatter
Posts: 1821
Joined: Sun Dec 06, 2009 11:00 pm
Location: Manchester

Post Wed Apr 25, 2012 8:44 pm

nice, but those turbines have me captivated... 8O ...i so want a set,
E30 320i Convertible (1989)
190 Mercedes (1988)

"there is nothing more expensive than a cheap E30"
adamski80
E30 Zone Regular
E30 Zone Regular
Posts: 722
Joined: Tue Feb 24, 2009 11:00 pm
Location: kings lynn / essex

Post Wed Apr 25, 2012 8:46 pm

cos we all drive fast enough to need brakes sooo cold hey?
I think they look nasty but hey not on that wagon..
Throwing stars ace turbines pants as fook!!!
Sorry
Dezzy
CR24v it's a lifestyle
Posts: 11974
Joined: Thu May 15, 2008 11:00 pm
Location: Middlesbrough

Post Wed Apr 25, 2012 8:55 pm

G-Bear wrote:Dezzy... I think your car (above) has become my favourite e30's I've seen.... It's bad to the bone...
Tar!
Image
Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
User avatar
hazd31
E30 Zone Squatter
E30 Zone Squatter
Posts: 1689
Joined: Sat Feb 07, 2009 11:00 pm
Location: west sussex, nr brighton

Post Wed Apr 25, 2012 8:58 pm

harry_p wrote:Brake bias on road cars is set up to be on the safe side, I.e set to lock the front wheels first whatever the expected load or road conditions. It helps that bmws are well balanced from the factory and loads evenly distributed.

Most hatchbacks or fwd cars have a rear end that's pretty light, but gains more as a proportion when fully loaded, so tend to have a proportioning valve attached to the rear suspension somewhere so when the back is light the rear brakes do very little, but when the car's heavier it opens allowing more fluid through and increasing effort.

As for drilled disks, technically you lose surface area and hence braking effort, but the holes improve cooling so you can use the brakes harder for longer without overheating.
I need to refit that spring on the back then! explains why my mk1 golf locks the rears under braking!!
User avatar
harry_p
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5313
Joined: Thu Oct 12, 2006 11:00 pm
Location: norfolk

Post Wed Apr 25, 2012 9:06 pm

Yep!

It works during weight transfer whilst braking too. Brake hard on a dry day and the weight transfers forwards, the back gets very light. If you have a manually adjustable bias, pus usually put it quite far forwards in the dry, in the wet you can put it further back as you don't have the grip to create as much forward weight transfer, so more weight is kept on the rear wheels so try can do a higher proportion of the braking.
cheers,

harry
ross_jsy
Married to the E30 Zone
Married to the E30 Zone
Posts: 7307
Joined: Sun Jul 12, 2009 11:00 pm
Location: Jersey, C.I.

Post Wed Apr 25, 2012 10:51 pm

pony wrote:
Ah Nice one thanks Harry_P :D

This fits nicely from what I have read from several different sources over the years that road cars in general are setup to a little understeer in their chassis to be on the conservative side.

I just found out today on the FIA F1 website F1 cars.....are the opposite....so in general the chassis is set up for a little oversteer to help point the car in cornering so with the turn in phase of "cornering".
You getting mixed up between brake bias and under/oversteer bias (can't remember the correct term) as they are 2 very different things.

And adamski, yes some of us do.
pony
I have been misbehaving and am sorry !
Posts: 6620
Joined: Sat Feb 11, 2006 11:00 pm
Location: London

Post Wed Apr 25, 2012 10:55 pm

ross_jsy wrote:
pony wrote:
Ah Nice one thanks Harry_P :D

This fits nicely from what I have read from several different sources over the years that road cars in general are setup to a little understeer in their chassis to be on the conservative side.

I just found out today on the FIA F1 website F1 cars.....are the opposite....so in general the chassis is set up for a little oversteer to help point the car in cornering so with the turn in phase of "cornering".
You getting mixed up between brake bias and under/oversteer bias (can't remember the correct term) as they are 2 very different things.

And adamski, yes some of us do.
I just meant that road cars are set up in general with a slight understeer handling trait.
F1 cars with a slightly more oversteering handling trait.

I am aware that brake bias is different. I just meant that road cars are on the conservative/prudent side with regards to overall handling characteristic and the way the brake bias is.

See

"Understeer is inherently stable - once the car reduces speed sufficiently grip will be restored, which is why almost all road cars are set up to understeer at the limit of adhesion. But it also slows a car, which is why Formula One chassis engineers try to avoid it. Oversteer is, by contrast, highly unstable. Unless a driver acts to correct it quickly with skilful use of steering and throttle it can result in a spin. But an 'oversteery' chassis helps the driver to turn into a corner and, at the limit of adhesion, enables a skilled driver to carry far more speed through a corner than understeer. Which is why, to a greater or lesser extent, all F1 cars are set up with an oversteer characteristic."

Source
http://www.formula1.com/inside_f1/under ... /5294.html
ross_jsy
Married to the E30 Zone
Married to the E30 Zone
Posts: 7307
Joined: Sun Jul 12, 2009 11:00 pm
Location: Jersey, C.I.

Post Wed Apr 25, 2012 11:09 pm

In general performance cars will be set up to oversteer.

I find oversteer far more controllable but that's when I'm expecting it. If you are ready you can catch it. Understeer always scares the hell out of me but to a normal driver it wont need a reaction to sort out so it is safer
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Thu Apr 26, 2012 12:07 am

ross_jsy wrote:
pony wrote:
Ah Nice one thanks Harry_P :D

This fits nicely from what I have read from several different sources over the years that road cars in general are setup to a little understeer in their chassis to be on the conservative side.

I just found out today on the FIA F1 website F1 cars.....are the opposite....so in general the chassis is set up for a little oversteer to help point the car in cornering so with the turn in phase of "cornering".
You getting mixed up between brake bias and under/oversteer bias (can't remember the correct term) as they are 2 very different things.

And adamski, yes some of us do.
Handling balance..?
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
Captain_Birdseye
E30 Zone Regular
E30 Zone Regular
Posts: 874
Joined: Sun Mar 25, 2012 11:00 pm
Location: Bristol (and Cheltenham)

Post Thu Apr 26, 2012 12:27 am

I want those turbines too :P
User avatar
rimz
E30 Zone Newbie
E30 Zone Newbie
Posts: 135
Joined: Wed Jun 30, 2010 11:00 pm
Location: birmingham

Post Thu Apr 26, 2012 2:10 am

RH Toplines diamond polished