Any one know anything about them as i'm thinking at getting a 325iS off a mate which has the 2.7 conversion, done by griffen motorsport.
Its a dolphin grey Sport with 6-branch, Magnex stainless system, and all the usual goodies.
Griffen Motorsport
Moderator: martauto
'91 Sterling Silver e30 320i SE
'96 Avus Blue e34 525i Sport
'92 Alpine White e30 318iS Touring
'86 Alpine White e28 M5 (008/187)
'02 Titan Silver e39 530d Sport Touring
'54 Cosmos Black e61 535d MSport Touring
'07 Sapphire Black e61 M5 Touring
[
'96 Avus Blue e34 525i Sport
'92 Alpine White e30 318iS Touring
'86 Alpine White e28 M5 (008/187)
'02 Titan Silver e39 530d Sport Touring
'54 Cosmos Black e61 535d MSport Touring
'07 Sapphire Black e61 M5 Touring
[
-
Gwynleym10
- E30 Zone Addict
- Posts: 3650
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: London/Cymru
- Contact:
If it is a REAL 325is 2.7 it would have been made in South Africa.
Otherwise there its just a 325i (no S) sport with a 2.7 conversion.
just thought i would clear that up...
Doesn't karan's have work done by griffen? or am i very wrong...
Otherwise there its just a 325i (no S) sport with a 2.7 conversion.
just thought i would clear that up...
Doesn't karan's have work done by griffen? or am i very wrong...
-
Ziggy
- E30 Zone Team Member
- Posts: 11534
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: floating round my tin can...
Yeah I think Karan has one of their heads? Supposed to be v. nice & v. expensive IIRC!Gwynleym10 wrote:If it is a REAL 325is 2.7 it would have been made in South Africa.
Otherwise there its just a 325i (no S) sport with a 2.7 conversion.
just thought i would clear that up...
Doesn't karan's have work done by griffen? or am i very wrong...
E30 in need of wiring loom smoke since April '11...
-
Demlotcrew
- E30 Zone Team Member
- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia
Yeah Karan has stage III head and its very nice!
Me want it
Andrew
Me want it
Andrew
-
Demlotcrew
- E30 Zone Team Member
- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia
Well you never know! Might turn to the dark sideJhonno wrote:its got too many combustion chambers for you tho Demlot
A
I think this is the one case when 6 pot is the dark side apparently Griffin stroked the 2.5 out to 2.7 rather than boreing it. giving it a longer stroke, crank and rods/pistons so as not to weaken the block. this sound right to any one?
'91 Sterling Silver e30 320i SE
'96 Avus Blue e34 525i Sport
'92 Alpine White e30 318iS Touring
'86 Alpine White e28 M5 (008/187)
'02 Titan Silver e39 530d Sport Touring
'54 Cosmos Black e61 535d MSport Touring
'07 Sapphire Black e61 M5 Touring
[
'96 Avus Blue e34 525i Sport
'92 Alpine White e30 318iS Touring
'86 Alpine White e28 M5 (008/187)
'02 Titan Silver e39 530d Sport Touring
'54 Cosmos Black e61 535d MSport Touring
'07 Sapphire Black e61 M5 Touring
[
-
Karan
- Married to the E30 Zone
- Posts: 8004
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Cheshunt, Hertfordshire
yeh my 2.7 has a griffin head with all the goodies..... i have the receipt here and the head casting cost Ԛ£1500!!! which is quite a lot
im sure Ian can elighten us as to the actual work on it.... although i believe it has the following:
strengthened welded waterways
3 angle etc...
ported
flowed
dunno about there actiual bottom ends though to be honest except they were one of the first out there to offer it but i dont think they do anymore
im sure Ian can elighten us as to the actual work on it.... although i believe it has the following:
strengthened welded waterways
3 angle etc...
ported
flowed
dunno about there actiual bottom ends though to be honest except they were one of the first out there to offer it but i dont think they do anymore
That includes a new casting aswell. Very good though.Karan wrote:yeh my 2.7 has a griffin head with all the goodies..... i have the receipt here and the head casting cost Ԛ£1500!!! which is quite a lot
im sure Ian can elighten us as to the actual work on it.... although i believe it has the following:
strengthened welded waterways
3 angle etc...
ported
flowed
dunno about there actiual bottom ends though to be honest except they were one of the first out there to offer it but i dont think they do anymore
There are cheaper alternatives which are as good. Player6's head is a work of art aswell (his engine puts out 250 bhp). I think that wont cost you Ԛ£1500 though.
I wonder if Griffen still make a 2.7
it was using the ETA crank so its the same configuration as the others. The only difference is usually the pistons if we look at the block in isolation.
Ask them what their 220bhp conversion costs.
it was using the ETA crank so its the same configuration as the others. The only difference is usually the pistons if we look at the block in isolation.
Ask them what their 220bhp conversion costs.
thats what this one is - the 220bhp conv. take it its a quality job then.
'91 Sterling Silver e30 320i SE
'96 Avus Blue e34 525i Sport
'92 Alpine White e30 318iS Touring
'86 Alpine White e28 M5 (008/187)
'02 Titan Silver e39 530d Sport Touring
'54 Cosmos Black e61 535d MSport Touring
'07 Sapphire Black e61 M5 Touring
[
'96 Avus Blue e34 525i Sport
'92 Alpine White e30 318iS Touring
'86 Alpine White e28 M5 (008/187)
'02 Titan Silver e39 530d Sport Touring
'54 Cosmos Black e61 535d MSport Touring
'07 Sapphire Black e61 M5 Touring
[
Yep! I know someone who used to own a full griffin motorsport and had an Alpina C2 aswell. He said the Griffin was much more brutal.
All depends on the condition of it though to be honest. get it dynoed before you buy it!
All depends on the condition of it though to be honest. get it dynoed before you buy it!
cheers 
'91 Sterling Silver e30 320i SE
'96 Avus Blue e34 525i Sport
'92 Alpine White e30 318iS Touring
'86 Alpine White e28 M5 (008/187)
'02 Titan Silver e39 530d Sport Touring
'54 Cosmos Black e61 535d MSport Touring
'07 Sapphire Black e61 M5 Touring
[
'96 Avus Blue e34 525i Sport
'92 Alpine White e30 318iS Touring
'86 Alpine White e28 M5 (008/187)
'02 Titan Silver e39 530d Sport Touring
'54 Cosmos Black e61 535d MSport Touring
'07 Sapphire Black e61 M5 Touring
[
-
Demlotcrew
- E30 Zone Team Member
- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia
but the GUG also sports this little baby!
Look at the join on the second cylinder pipe its sleved for god sake!
Ive yet to see something as good!
(the top pic is of a RD manifold made for the 525i, and the 325i ones were better!)
Andrew
Look at the join on the second cylinder pipe its sleved for god sake!
Ive yet to see something as good!
(the top pic is of a RD manifold made for the 525i, and the 325i ones were better!)
Andrew
Are there any of these Griffin motorsport cars on here right now or even any left?
I used to live about 5 miles from there yard in lydiard Millicent i think it was.
Even sent off for there brochure/price list shortly after owning my first e30 in 94, wish i still had the paper work.
I remember you could have a variety of packages, 2.7 based on 2.5 or 2.3.
Different performance packages, all meant you got a rebuild then options on different heads and 6 branchers.
Pretty sure they were doing short wheel base Audi Quatro conversions at one stage too.
All a very long time ago, just wondered if any still about or if anyone has any pictures of them?
I used to live about 5 miles from there yard in lydiard Millicent i think it was.
Even sent off for there brochure/price list shortly after owning my first e30 in 94, wish i still had the paper work.
I remember you could have a variety of packages, 2.7 based on 2.5 or 2.3.
Different performance packages, all meant you got a rebuild then options on different heads and 6 branchers.
Pretty sure they were doing short wheel base Audi Quatro conversions at one stage too.
All a very long time ago, just wondered if any still about or if anyone has any pictures of them?
There must be some of these cars left on the road or tucked away somewhere, who knows how many conversions they did.
Not looking like there are any on here though, just the stage 3 head on the GUG
Not looking like there are any on here though, just the stage 3 head on the GUG
Project XS from mid 94, had a reiger wide arch kit on it, cant remember what engine but i still have a couple of Max power mags from that year with it in.milez wrote:Wonder what ever happened to Max Powers project 320 from about 95, the purple wide arch thing ! I'm pretty sure that had a Griffin built 2.3 in it .
Forgot about that!bss325i wrote:Project XS from mid 94, had a reiger wide arch kit on it, cant remember what engine but i still have a couple of Max power mags from that year with it in.milez wrote:Wonder what ever happened to Max Powers project 320 from about 95, the purple wide arch thing ! I'm pretty sure that had a Griffin built 2.3 in it .
3 spoke rims were cool in them days
And the chequer graphics! yeah!oguz327 wrote:Forgot about that!bss325i wrote:Project XS from mid 94, had a reiger wide arch kit on it, cant remember what engine but i still have a couple of Max power mags from that year with it in.milez wrote:Wonder what ever happened to Max Powers project 320 from about 95, the purple wide arch thing ! I'm pretty sure that had a Griffin built 2.3 in it .
3 spoke rims were cool in them days