e30 m3 replica 9k
Moderator: martauto
-
leeparkes
- Married to the E30 Zone

- Posts: 9538
- Joined: Thu Jan 03, 2008 11:00 pm
- Location: Black country
E46 330ci 3.0 lt engine, ports opened out for M50 2.5 (e36) manifold, converted to single vanos, running on M52 2.5(later e36) non EWS single vanos ecu/maf etc. rolling roaded without a remap at 251 bhp.
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place..
Sounds like a big job compared to a m52 conversion
MY FACEBOOK PAGE- CLASSIC STANCE
http://www.facebook.com/pages/Classic-S ... 6444884427
MY FOUR EYED BEAST
http://www.e30zone.net/modules.php?name ... highlight=
http://www.facebook.com/pages/Classic-S ... 6444884427
MY FOUR EYED BEAST
http://www.e30zone.net/modules.php?name ... highlight=
-
HairyScreech
- Engaged to the E30 Zone

- Posts: 6265
- Joined: Sun Jan 21, 2007 11:00 pm
Sounds like a very odd combo, that lump would have the "cathedral" ports so would have taken a later 330ci manifold with no issues, with that it would have done 260 but not so sure with the ports massaged and an m50 manifold, sounds like a step backwards.
Other than that it is a stunning job of the replica.
Other than that it is a stunning job of the replica.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
- Kos
- E30 Zone Team Member

- Posts: 15546
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: London / Cyprus
- Contact:
It's probably a ringer
PUKAR DESIGNS - Reproduction BMW Decals Labels Sticker & Number Plates
www.pukardesigns.com
www.facebook.com/pukar.designs/
IG Pukar.Designs
www.pukardesigns.com
www.facebook.com/pukar.designs/
IG Pukar.Designs
'ringer' is usually my first thought when you see a replica that's a bit too good, as sad as that is.
However, i wouldn't expect a rung, rhd converted proper m3 to be using compact rear arms, or to have retrofitted a normal lockstrip fitting front windscreen.
However, i wouldn't expect a rung, rhd converted proper m3 to be using compact rear arms, or to have retrofitted a normal lockstrip fitting front windscreen.
cheers,
harry
harry
-
smithysmith
- E30 Zone Regular

- Posts: 356
- Joined: Sat Oct 17, 2009 11:00 pm
- Location: Fairford
Looks like one of the best ones I've seen. Crying out for an s50.
Guessing you've not read the above posts?death wrote:1+Kos wrote:It's probably a ringer
Looks a decent car and reasonably priced TBH, with what it cost to do the conversion + paint etc. Assuming it is done properly and is a tidy motor.

- Kos
- E30 Zone Team Member

- Posts: 15546
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: London / Cyprus
- Contact:
Years ago there was a red 318is M3 replica on eBay which was a ringer.
PUKAR DESIGNS - Reproduction BMW Decals Labels Sticker & Number Plates
www.pukardesigns.com
www.facebook.com/pukar.designs/
IG Pukar.Designs
www.pukardesigns.com
www.facebook.com/pukar.designs/
IG Pukar.Designs
Do you ever say anything nice you grumpy git, you fo0king called my car a turd to my faceKos wrote:It's probably a ringer
MY FACEBOOK PAGE- CLASSIC STANCE
http://www.facebook.com/pages/Classic-S ... 6444884427
MY FOUR EYED BEAST
http://www.e30zone.net/modules.php?name ... highlight=
http://www.facebook.com/pages/Classic-S ... 6444884427
MY FOUR EYED BEAST
http://www.e30zone.net/modules.php?name ... highlight=
Nicely played Diable 
He calls everyones car a turd the C11cNT
He calls everyones car a turd the C11cNT
MY FACEBOOK PAGE- CLASSIC STANCE
http://www.facebook.com/pages/Classic-S ... 6444884427
MY FOUR EYED BEAST
http://www.e30zone.net/modules.php?name ... highlight=
http://www.facebook.com/pages/Classic-S ... 6444884427
MY FOUR EYED BEAST
http://www.e30zone.net/modules.php?name ... highlight=
- Kos
- E30 Zone Team Member

- Posts: 15546
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: London / Cyprus
- Contact:
All cars are turds but my turds are birthed from the aftermarth of an Alabama hot pocket which makes them specialkangman wrote:Nicely played Diable
He calls everyones car a turd the C11cNT
PUKAR DESIGNS - Reproduction BMW Decals Labels Sticker & Number Plates
www.pukardesigns.com
www.facebook.com/pukar.designs/
IG Pukar.Designs
www.pukardesigns.com
www.facebook.com/pukar.designs/
IG Pukar.Designs
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27985
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
- Contact:
But HIS actaully is the CUNTkangman wrote:Nicely played Diable
He calls everyones car a turd the C11cNT

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
- Kos
- E30 Zone Team Member

- Posts: 15546
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: London / Cyprus
- Contact:
When it was on eBay it was running a 4 lug set up
PUKAR DESIGNS - Reproduction BMW Decals Labels Sticker & Number Plates
www.pukardesigns.com
www.facebook.com/pukar.designs/
IG Pukar.Designs
www.pukardesigns.com
www.facebook.com/pukar.designs/
IG Pukar.Designs
Yep, this is that one. I saw it in progress and had the original M42 engine out of it in my old 2 door!pacerpete wrote:Kos wrote:It's probably a ringer
Its not. I met the guy who built it and sold him some bitsIIRC he was from Nottingham and was a BMW specialist / breaker.
Can't be many out there with porsche brakes. Was definitely done to a high standard and with all original panels.
Engine is definitely running M52 management. Either the current owner or the one before posted on here about it as he was having trouble locating a thermostat housing as the one on it had a sensor of some sort fitted in it.
-
Rtaylor2208
- E30 Zone Addict

- Posts: 3004
- Joined: Mon Oct 11, 2010 11:00 pm
- Location: Ayr, Ayrshire, Scotland
Its a narrow market of buyers so its only worth it to someone that really wants what looks like a well built rep.
I doubt you could build the same spec car for less.
I doubt you could build the same spec car for less.
Nope, just needs the black stripe on the bumpers. The lid looks a little bare without an m3 badge, but its nice that he's left them off.
As for value, then no doubt it cost more to build. I wouldn't pay anywhere near that though. £6k maybe at a push, but for near on ten grand I'd rather have a scruffy real m3 which needed a little tlc than a mint 318is based replica.
As for value, then no doubt it cost more to build. I wouldn't pay anywhere near that though. £6k maybe at a push, but for near on ten grand I'd rather have a scruffy real m3 which needed a little tlc than a mint 318is based replica.
cheers,
harry
harry





