E30 Zone

Diagnostics already done Cylinder 1 Inlet valve Rocker Broken on a BMW 325ix I have had a few quotes of just over £2000 is there any chance you can just pull out the camshaft, and replace the broken rocker. based in the UK. thanks https://i.ibb.co/MNXyrqp/PHOTO-2023-07-04-11-59-15.jpg [/url][/img] h...

Hi

i cant hear any noise from the motor when in use its driving me mad, Ive tried to use the Alan key to sync the motor but no luck.

i changed the lever as the old one was broken.

If anyone could help thanks.

Hi

Convertible roof doesn’t work when pushing buttons when I manually put the roof down I saw some sort of broken cog.

Also when pressing the buttons I can’t hear the motor working.

Any help including how much may cost to fix.

Thanks

Just brought a convertible and the roof is working but is quiet damaged.

Can anyone give me advice if I can get a cheap referb done or any help with this.

there is a hole in a roof and a big hole on the plastic rear mirror.

thanks.

brutus wrote: ↑
Sat Jun 22, 2019 2:26 pm
…………. and ive got many e30 oem tec 2 clips, available !

How much do you want for the clips

kdevitt wrote: ↑
Fri Jun 21, 2019 11:29 am
The cabrio needs specific side skirts - rest of the kit fits fine

OK
so front bumper, front valance , rear bumper is all the same

just the side pods I have to find the cabroilet ones

thanks

Hi

I have a e30 320 convertible K reg and want to put a genuine tech 2 kit on which one will fit a 3rd coupe or do I have to buy a mtech 2 kit designed for the convertibles

BenHar wrote: ↑
Tue Jun 18, 2019 8:29 pm
Convertible or sunroof?

Ben

convertible

Hi

Just purchase a bmw e30 320 K reg the roof isn’t working but I can hear the motor clicking when pressing the button.

Any tips on what could be the fault or what I should be looking for. Or if they are any common faults with these roofs

Cloggy Saint wrote: ↑
Thu Jun 06, 2019 11:00 am
How many miles?
What size engine?
How much MOT?
How many owners?
Any pictures?

When you say you want to buy a coupe I assume you mean a 2 door saloon?

90k
316i
new MOT
4 owners

Hi

Brought a 4dr E30 saloon I’ve put a tech 2 front bumper and rear bumper fibreglass.

Car starts and drives perfectly no rust on sills or skirts only a little bit of bubbling by the pillar.
A lot of paper work for the car.

How much is this car worth as I want to sell it and buy a coupe.

Please click on the thread below

viewtopic.php?f=1&t=278035

Some of you may of seen this post but this car is driving me mad and I need some advice Brought a e30 316 for a good price mechanially brilliant just a bit of front damage I thought it would just be a replacement bumper since taking it off I have realised the passenger side chassis is damaged, the l...

Hey,

I need some help I've found a cheap pair of 15inch bbs off a e30 325 but its 5 studs and my 316 is 4 studs is there anything I can do such as buy spacers to make it 5 bolts or a stud conversion

if it costs to much I don't think I would do it and find 4x100 then

thanks all

Cloggy Saint wrote: ↑
Tue Apr 16, 2019 1:23 pm
Here's the link for the sensor http://www.realoem.com/bmw/enUS/showpar ... Id=33_0121 but as jmc says it's far more likely to be a break in the wiring from the sensor.

What number is it

jmc330i wrote: ↑
Tue Apr 16, 2019 12:52 pm
How come you want to replace the sensor?

speedo isn't working

Hi im looking for to replace my speedo sensor which is located on the rear diff I can't seem to find it on real oem can anyone help

thanks

http://www.realoem.com/bmw/enUS/partgrp ... BMW-316i/b]

Oseanosea wrote: ↑
Fri Apr 05, 2019 8:21 pm
CF6948F0-31E1-4B96-864A-100526DD576F.jpeg
ronveerlal wrote: ↑
Wed Mar 27, 2019 7:45 pm

BenHar wrote: ↑
Wed Mar 27, 2019 6:39 pm

Do you have an image of so I know what I’m looking for sorry if it sounds stupid

Ahhh wicked thanks mate

I do own a 316i with a factory fitted tech II kit - a laguna green touring, but it has a standard exhaust. The only difference between exhaust fitting arrangements across the whole E30 range is the cut out in the rear valance and the tech II kit that covers it. Models with twin tail pipes have a wi...

has anyone fitted a scorpion exhaust on a e30 316i ?

I've put a tech 2 kit on and need to source a exhaust that will be an easy swap

thanks

Thanks

Brought a crash bar paid via PayPal genuine seller also gave me the tracking number was packed very well and at cheap prices.

Look under the back of the car. In the middle is the differential with a driveshaft going to each rear wheel. On the back cover of the diff. case there is an oil filler plug, and oil drain plug, and an electrical socket with a plug pushed into it, and a cable with two wires going to the plug. It's ...

If it is the speedometer (not the odometer which shows the distance travelled and is prone to worn cogs) then check the wires from the sender at the back of the differential. The last 10 inches of those can get brittle and snap inside the insulation. Ben Do you have an image of what I’m looking for...

If it is the speedometer (not the odometer which shows the distance travelled and is prone to worn cogs) then check the wires from the sender at the back of the differential. The last 10 inches of those can get brittle and snap inside the insulation. Ben Do you have an image of so I know what I’m l...

Was it the speedometer, the odometer, or the trip meter not working or all three? Difficult to diagnose a fault when you're not sure what the EXACT symptoms are. sorry im new to this all three are not working so when im driving the miles don't go up nor the trip meter nor I know what speed im doing...

And the cogs seem fine working when I spun them it worked

Update I have taken the whole cluster out

The two sides are connected white and blue, but nothing was connected to the middle yellow one I can’t seem to find the wire anywhere any help it’s a 316i.

All my gauges work except from my speed one Past history shows a investigation was done on the speedo. Checked speed sensor removed instrument checked wiring no faults. previous owner has replaced speedometer in instrument cluster. I have seen online it can sometimes be the cogs or could it be somet...

Looking to purchase a scorpion backbox from a 325i I have a 316i will it be a straight swap with my back box or would some work need doing?

I’ll be buying some items soon can anyone give me some tips on the safest way to buy as I’ve been scammed in the past

Thanks

BenHar wrote: ↑
Mon Mar 18, 2019 2:58 pm
Number 24 here: http://www.realoem.com/bmw/enUS/showpar ... Id=41_0455

Ben

thanks mate been going crazy looking for this all day

Brianmoooore wrote: ↑
Mon Mar 18, 2019 10:39 am
Bog standard M6.

can you send me a link for eBay or a part number so I can purchase it as by Bonet isn't closing

can you send me a link for eBay or a part number so I can purchase it as by Bonet isn't closing

Hi broke my Bonet adjustment screw the other day ive been told its an m8 bolt but just wanted to confirm

The Bonet on my e30 don't close it just pops back out the actual mechanism works as when I pull it the leaver it works I can see it moving when I pull it

Search found 40 matches

Cylinder 1 Inlet Valve Rocker broken

HELP soft top not working

Convertible roof not working

Damaged Convertible Roof

Re: Mtech 2 kit

Re: Mtech 2 kit

Mtech 2 kit

Re: 320 roof not working

320 roof not working

Re: Help pricing my e30

Help pricing my e30

Help on a damaged E30jaybold

ACIDENTAL DAMAGE HELP

5 Stud conversion HELP!!!

Re: using RealOEM help

Re: using RealOEM help

using RealOEM help

Re: Cluster Gague problems

Re: anyone own a 316i? Tech 2 help

anyone own a 316i? Tech 2 help

Re: magpie

Re: Cluster Gague problems

Re: Cluster Gague problems

Re: Cluster Gague problems

Re: Cluster Gague problems

Re: Cluster Gague problems

Re: Cluster Gague problems

Cluster Gague problems

exhaust help

Tips on purchasing items

Re: Can anyone tell me the size of this screw

Re: Can anyone tell me the size of this screw

Re: Can anyone tell me the size of this screw

Can anyone tell me the size of this screw

316i Bonet not closing