Had a thought on carbs...

[choppa7]

Since they seem to be hard to come by here, I thought I'd try German ebay.

From the pics and the pidgeon english description would someone be able to tell me if they think they're cool for an M10.

Below each link is a description which I've used an online translator for.

Cheers

http://cgi.ebay.de/BMW-02-2002-Ansaugbr ... dZViewItem

Auctioneer here a sentence aluminum sucking in bridges suitably for all BMWS M10 engines. The sucking in bridges have a connection diameter of 52mm! Accordingly only for racing purposes and be called completely engines suitably! One will so fast not find such sucking in bridges again! It concerns original, old racing parts in outstanding condition! Please they consider my other auctions, in which I offer further BMWS of 02 racing parts!! With questions they write me please email! Much fun when offering! I would like to point out expressly that it concerns here a used article, for which I no warranty or guarantee line give can.

--------------------------------------------------------

http://cgi.ebay.de/BMW-02-2002-Ansaugbr ... dZViewItem

Auctioneer here a set of sucking in bridges, suitably for all BMWS M10 engines, e.g. 2002, E21 or NK! The characteristic at these sucking in bridges is that they were manufactured from steel and an extremely large inside diameter of 52mm exhibit. Accordingly only for racing purposes and be called completely engines suitably! Such sucking in bridges will one thinks I so fast again for finding! It concerns original, old racing parts! Please they consider my other auctions, in which I offer further BMWS of 02 racing parts!! With questions they write me please email. Much fun when offering! I would like to point out expressly that it concerns here a used article, for which I no warranty or guarantee line give can.

----------------------------------------------------------------

http://cgi.ebay.de/BMW-1502-2002TII-200 ... dZViewItem

Hello, they offer here on a sentence original Solex 40PHH double carburetor larva in Germany. the carburetors are complete with sucking in bridge and aspirating pipes as well as the gas linkage the bridge (Orginal BMW) as well as the carburetors fit on the M10 engine as it in the BMW 02 to be found are. the carburetors are functional, the waves are free moving, however you should be cleaned and overhauled, since they were stored already for a very long time. There private sales no warranty or return right



Sorry to be a pain in the arse about this people

[Si316]

alright mate. looks like the first 2 have been enlarged to take some massive carbs.

The last link looks like there the ones you want, I'm not sure about the carbs tho. Ive been told that the solex carbs arent too good and to swap for 40mm dcoe/dhla. Ive got these stock 2002ti manifolds on mine which are good for 40mm dhla/dcoe.

I know a company called Jaymic (www.jaymic.co.uk) do the manifolds but there expensive so keeping your eye on ebay is a good idea.

[CraigG]

bogg brothers will make you a manifold. think they charge around 200-300quid for one to be made up

[choppa7]

alright mate. looks like the first 2 have been enlarged to take some massive carbs.

The last link looks like there the ones you want, I'm not sure about the carbs tho. Ive been told that the solex carbs arent too good and to swap for 40mm dcoe/dhla. Ive got these stock 2002ti manifolds on mine which are good for 40mm dhla/dcoe.

I know a company called Jaymic (www.jaymic.co.uk) do the manifolds but there expensive so keeping your eye on ebay is a good idea.

so I could get the last ones if the price is right then just get some decent carbs to fit?

Just been reading your thread about the carb setup/convesion, you're the inspiration for this M10 madness!!!!!

[Si316]

Just been reading your thread about the carb setup/convesion, you're the inspiration for this M10 madness!!!!!

haha, cheers dude. Its good to be diffrerent. Theres afew of us now tuning up these m10s

Yeah those in the last link are the ones that I have and if you can get them for a good price then maybe just get some other carbs. You might be able to use those carbs. I was advised to go for dcoe/dhla's because of the spec of the engine ive got.

[e21Jason]

Hi

I have sold a coupel of sets of m10 side draft manifolds normaly about 50-75 + 50 for a pair of used dellorto's £200 should get a manifold and a set of rebuilt carbs

Jason