Hi guys I thought I'd share my good news.
I did a power run on my car a year ago on the standard cam and achieved 170bhp and 170lb torque @ 5553rpm, pretty good for semi standard 325i.
The other mods are: Big Bore Throttle Body, Pipercross Viper cold induction kit and a â€ËaZone chip'.
I then rebuilt my head during the summer and I put in a Shrick 284/272 cam, Shrick uprated valve springs plus a Kent vernier pulley. I then got the cam timed up by the guys at Bexley's.
So eventually got round to getting another power run done last week.
It managed 193bhp and 185lb torque @ 6660 rpm which is an increase 23bhp & 15lb/ft Torque not bad eh!! I'm pretty chuffed with that, especially when the car has done 130,000 miles!
The plots can be seen below:
Before:
http://img187.imageshack.us/img187/8140 ... oreyo4.jpg
After:
http://img148.imageshack.us/my.php?imag ... teraa0.jpg
Latest power run!
Moderator: martauto
-
Gouki
- E30 Zone Addict

- Posts: 2262
- Joined: Mon Jun 13, 2005 11:00 pm
top job mate, has it been a noticeable difference?

-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
That is a nice power curve imo! Great result 
-
325zimmer
- E30 Zone Newbie

- Posts: 98
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Ruislip, London
there is definately a change, lost bottom end torque, but pulls like a train at high revs!Gouki wrote:top job mate, has it been a noticeable difference?

-
snoops
- Major Helmet
- Posts: 2828
- Joined: Fri Nov 03, 2006 11:00 pm
- Location: Time running out for me on the Zone
good work mate!

