rhd manifold for e30 320is/m3 engine

Need technical Q/A then you're in the right place

Moderator: martauto

eamo
E30 Zone Regular
E30 Zone Regular
Posts: 465
Joined: Tue Feb 22, 2005 11:00 pm
Location: Offaly, Ireland

Post Sun Jan 07, 2007 5:16 pm

lads

im dropping a 320is engine into my rhd standard e30. its my current project car.

however i need a rhd manifold for the engine as these were only available in lhd like the m3. And as you all know the 320is engine is a s14 engine the same as the m3 and they only came in lhd

i want info from someone who has already made one, that wont be down on performance and will match up to the standard m3 exhaust system ( i plan on putting on a superprint system at a later date)

can someone point me in the right direction???

thanks guys
eamo
E30 Zone Regular
E30 Zone Regular
Posts: 465
Joined: Tue Feb 22, 2005 11:00 pm
Location: Offaly, Ireland

Post Mon Jan 08, 2007 4:26 pm

anyone??
Bob_S
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5412
Joined: Sat Jun 11, 2005 11:00 pm
Location: chester, cheshire

Post Mon Jan 08, 2007 7:19 pm

i think demlotcrew might be able to help you with this mate
Bollocks to this 24v scrap!
e21Jason
E30 Zone Addict
E30 Zone Addict
Posts: 2040
Joined: Tue Jan 11, 2005 11:00 pm
Location: Dubai, UAE

Post Mon Jan 08, 2007 9:42 pm

Hi

There was a disscusion about this on the bme owners club last and i am in the same situation i paid attention. it would seem that the bairds rhd manifold was jsut the standard one with the down pipes splayed so the steering colounm can pass though

Jason
Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Post Mon Jan 08, 2007 9:58 pm

it's a custom manifold for you unless you can find a Hartge RHD one.................