318is Exhaust need replacing, look here!

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

User avatar
Ian318IS
E30 Zone Newbie
E30 Zone Newbie
Posts: 81
Joined: Thu Aug 10, 2006 11:00 pm
Location: Northampton

Post Wed Nov 08, 2006 2:56 pm

My standard exhaust had had its day and was blowimg all over the place, and have been struggling to find an aftermarket one. Jetex want an order of 25 to even start making them, so I was pretty stuck.

Went to this place yeaterday.........

C.C. CUSTOMS LIMITED
UNIT 96
LEYLAND TRADING ESTATE
WELLINGBOROUGH
NN8 1RT
Tel: 01933 445255
info@cc-customs.com

for a quote, and ended up leaving the car there on the ramp. Had a Full stainless made from the front pipe back. After the down pipe, 4 into 2 into 1, it was cut and sleeved, and then made from scratch. 1 small silencer in middle, back box and you choose the tailpipe. I chose a simple rolled out, about 2 1/2 inch. The fit is perfect and sounds awesome!

The cost was Ԛ£350 all in, with a 24hr turn around.

Really helpfull guys :D

Well recommended! :D

Here are some pics!

Image

Image

Image

Image

Image

Ian.

PS, Thanks to Spadge for the loan car too!

Image
Last edited by Ian318IS on Wed Nov 08, 2006 3:05 pm, edited 2 times in total.
BMW 318IS Metalic Black.
60/40 kit.
Work in progress! lol!
User avatar
Jamesb318is
E30 Zone Regular
E30 Zone Regular
Posts: 620
Joined: Wed Jan 12, 2005 11:00 pm
Location: East Sussex

Post Wed Nov 08, 2006 3:01 pm

looks good mate, and they price isnt bad either.
Must be bloody noisy though, mine has two boxes in it and thats loud enough!
ImageImage
dark_sounds
E30 Zone Addict
E30 Zone Addict
Posts: 2458
Joined: Thu Dec 01, 2005 11:00 pm

Post Wed Nov 08, 2006 3:13 pm

mines got 3, 1 V big one, 2 medium size ones and its still pretty deep and loud!
Directed CompX's 12"... 2off. 1000 watts RMS, dual 2ohm VC. 90£ each!!
8600 Luna Phone 480 POSTED BNIB
M5pilot
E30 Zone Addict
E30 Zone Addict
Posts: 4968
Joined: Sun Jan 30, 2005 11:00 pm
Location: Luton

Post Wed Nov 08, 2006 4:09 pm

Very pretty!

I think for 318iS's it's a case of custom or Sebring only now.

Just sad how they don;t make much for these superb cars anymore.

Sal
SPADGE
Married to the E30 Zone
Married to the E30 Zone
Posts: 7373
Joined: Wed Aug 09, 2006 11:00 pm
Location: Milton Keynes, Bucks

Post Wed Nov 08, 2006 8:18 pm

Looking good mate 8)
No worries re the loan car its been nice to have 1 less car here for a day or two are you sure you don't want to borrow it for longer winkeye
Nice comparison between the ride heights on the last pic too :eek:
See you in the morning :D
User avatar
Ian318IS
E30 Zone Newbie
E30 Zone Newbie
Posts: 81
Joined: Thu Aug 10, 2006 11:00 pm
Location: Northampton

Post Thu Nov 09, 2006 12:07 am

Spadge, I could keep the car a bit longer, but you may have normal rear window in it when you get it back! :cry: :cry:
BMW 318IS Metalic Black.
60/40 kit.
Work in progress! lol!
User avatar
reggiegasket
E30 Zone Newbie
E30 Zone Newbie
Posts: 96
Joined: Fri Sep 29, 2006 11:00 pm
Location: Preston

Post Sat Nov 11, 2006 8:45 am

Nice exhaust; do sounds levels go up a lot with these specially made items? I don't really like the the big deep noises I hear son some modified cars.

Love those wheels on Jamesb's car - are those super expensive ones :eek:

G
User avatar
Jamesb318is
E30 Zone Regular
E30 Zone Regular
Posts: 620
Joined: Wed Jan 12, 2005 11:00 pm
Location: East Sussex

Post Sat Nov 11, 2006 11:54 am

Mine is pretty loud mate, but i think it suits the car if you know what i mean. With a lot of custom places you can specify the noise level though, they just add more or bigger boxes to reduce it.
Thanks for the comment on the wheels, put it this way, even with 20% discount they werent cheap!
ImageImage
spence_star
E30 Zone Regular
E30 Zone Regular
Posts: 512
Joined: Thu Nov 23, 2006 11:00 pm
Location: London

Post Sun Jan 07, 2007 10:35 pm

Thats a lovely system you got there and at a good price.
Returned after many years out.
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Sun Jan 07, 2007 10:44 pm

thats a real good price!! i might ring them when i need my full system for my IS
Image
SPADGE
Married to the E30 Zone
Married to the E30 Zone
Posts: 7373
Joined: Wed Aug 09, 2006 11:00 pm
Location: Milton Keynes, Bucks

Post Sun Jan 07, 2007 10:47 pm

stuartgallafant wrote:thats a real good price!! i might ring them when i need my full system for my IS
Mate have you seen my advert for this very exhaust in the for sale section?
I've bought the car back off Ian and am planning another M30 conversion with it so the exhaust will be of little or no use to me!
Engine conversions, Auto to manual conversions, parts, servicing etc etc... For anything e30 call 07718 901737
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Sun Jan 07, 2007 10:53 pm

hhmmm, its something to consider!

i want a full system though, inc. manifold so i can ensure on the right sound and the right performance gains, aswell as the way it looks!

but like i said, i will think about it
Image
Omi
Witty custom rank.
Posts: 1478
Joined: Sun Jan 09, 2005 11:00 pm
Location: Darlington, North East

Post Sun Jan 07, 2007 10:54 pm

Sorry to say, but that mandrel-bent nonsense isn't the way to go.

Blue Flame - only pre-bent pieces used, all collared, butted and welded.

There's pics of mine somewhere, will cost you well over £500 but worth every penny.

Just my 2p!
...or is it?
kam-325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 4851
Joined: Tue Sep 27, 2005 11:00 pm
Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!

Post Sun Jan 07, 2007 10:54 pm

Looks like a nice system, shame about the welding on the tailpipe !!!!
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
Image
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Sun Jan 07, 2007 10:55 pm

Omi, i'll have a word with you about yours the next time i speak to you fella
Image
GingerTim
E30 Zone Newbie
E30 Zone Newbie
Posts: 240
Joined: Mon Dec 18, 2006 11:00 pm
Location: Oxfordshire

Post Sun Jan 07, 2007 10:57 pm

£350 all in. Silly price's :mad: Bargin!
Image
SPADGE
Married to the E30 Zone
Married to the E30 Zone
Posts: 7373
Joined: Wed Aug 09, 2006 11:00 pm
Location: Milton Keynes, Bucks

Post Sun Jan 07, 2007 11:04 pm

Omi wrote:Sorry to say, but that mandrel-bent nonsense isn't the way to go.

Blue Flame - only pre-bent pieces used, all collared, butted and welded.

There's pics of mine somewhere, will cost you well over £500 but worth every penny.

Just my 2p!

Why?
How are these 'pre-bent' pieces bent?
Engine conversions, Auto to manual conversions, parts, servicing etc etc... For anything e30 call 07718 901737