The problem here is that when i try to start the engine fuelpump doesn't go on and the engine doesn't get any fuel.
What do i have to do to get it work?
Also some asshol# have taken off fuelpump relay and its wires.
Motronic conversion problem
Moderator: martauto
So my E30 is original 316i -88, M40 motor with motronic 1.3 and now i have M20B25 high compression 85-87 model with motronic 1.0.
The problem here is that when i try to start the engine fuelpump doesn't go on and the engine doesn't get any fuel.
What do i have to do to get it work?
Also some asshol# have taken off fuelpump relay and its wires.
The problem here is that when i try to start the engine fuelpump doesn't go on and the engine doesn't get any fuel.
What do i have to do to get it work?
Also some asshol# have taken off fuelpump relay and its wires.
-
Ant
- Retired Team Member
- Posts: 10496
- Joined: Tue Dec 21, 2004 11:00 pm
- Location: PD+E dept :D
- Contact:
use a facelift harness and crankshaft sensor set on that engine, Plug it all in and away you go.
Your Tacho will work too- always useful
Your Tacho will work too- always useful
Product Development and Endurance for Delphi.
Original performance chips, original works not unlicensed copies
Email FTW
Original performance chips, original works not unlicensed copies
Email FTW-
Speedtouch
- Old Skooler
- Posts: 14060
- Joined: Tue Feb 14, 2006 11:00 pm
- Location: Canterbury
Also see the Zone Wiki:
http://www.e30zone.net/e30zonewiki/inde ... tronic_1.3
And mattyb's thread:
http://www.e30zone.net/modules.php?name ... 78&start=0
http://www.e30zone.net/e30zonewiki/inde ... tronic_1.3
And mattyb's thread:
http://www.e30zone.net/modules.php?name ... 78&start=0
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421