I need a new one of these for my car, I've found this one on ebay:
http://www.ebay.co.uk/itm/BMW-Flexiblle ... 3f1d999925
Am I right in saying Meyle parts are as good as OEM? I know Lemforder is, but not sure on Meyle?
Propshaft rubber donut
Moderator: martauto
-
jimbom30cab
- Tech 1 freak
- Posts: 7631
- Joined: Mon Oct 12, 2009 11:00 pm
- Location: in the garage
Hey Jer, i've got a decent one in the garage you can have for free if you like
I've gone down the M20 flange and prop route so don't need my M30 donut
It's in very good condiiton and genuine iirc
let me know
cheers
Jim
I've gone down the M20 flange and prop route so don't need my M30 donut
It's in very good condiiton and genuine iirc
let me know
cheers
Jim
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
Meyle's fine; I used plenty of their stuff on my car, including the bushes.
'89 325i Touring | Touring Resto Thread | In-Dash Screen install
-
Bristol_Jer
- E30 Zone Addict

- Posts: 2523
- Joined: Thu Sep 24, 2009 11:00 pm
- Location: Bristol, UK
Thanks for the offer Jim, but I'm going to put a new one on there just so I know it is sorted and won't have to replace it again as the car gets used hard
I've since found ECP do a Lemforder one cheaper than the one on ebay so gonna go for that one but handy to know Meyle are good
I've since found ECP do a Lemforder one cheaper than the one on ebay so gonna go for that one but handy to know Meyle are good
-
Andy325i
- E30 Zone Addict

- Posts: 4052
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Avon
Meyle products are excellent
Use their P bushes and engine mount bushes on any 306's I do 

M50B25NonVanos & M52B28Vanos Heads for sale. Pm Me.
