i wanta fit a e36 rack on my non pas e30 m40 1.8
what parts do i require? as mine is non pas will i have too change ujs ect?
thanks
david
e36 rack on non pas
Moderator: martauto
-
Silverfang
- E30 Zone Regular
- Posts: 937
- Joined: Fri Dec 23, 2005 11:00 pm
- Location: Northampton
Will need the PS pump with mountings and belt from a 1.8 / 1.6 with PS combined with Danthe's kit to fit an E36 rack. Best put a wanted advert in the wanted section for the bits and go from there.
Whilst you're there, it's best to get new E30 inner and outer tie rod joints (basically completely new ones) and new gators whilst you're there and refresh the whole lot.
Whilst you're there, it's best to get new E30 inner and outer tie rod joints (basically completely new ones) and new gators whilst you're there and refresh the whole lot.
BMW and Opel, both RWD, both german, both good fun
http://www.clockservicing.co.uk/ For any clock repairs try here.
http://www.clockservicing.co.uk/ For any clock repairs try here.