I have managed to bag myself a pretty good diff carrier so i can get it powder coated and slam it on the car when i'm ready.
Trouble is the old mounts/bushes are still in the carrier. I've tried to get the bast####out but as yet i'm still struggling.
Can anyone point me in the right direction???
CIA
Jimbo
diff carrier bushes
Moderator: martauto
-
capri_rob
- Married to the E30 Zone
- Posts: 9678
- Joined: Tue Feb 19, 2008 11:00 pm
- Location: South Staffordshire
You can put a hacksaw blade through the middle and cut them out, or take them to a local garage on a saturday morning when the gaffers not around and give them a drink to press them out or if you want to be a proper hero get the blowlamp on them and burn the fookers out 
e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
-
scjimbo
- E30 Zone Camper
- Posts: 1249
- Joined: Thu Feb 09, 2012 11:00 pm
- Location: Gloucester
Ah cheers Rob. Thats what I thought. I'll get the gas axe out in the morning.
-
kipsy
- E30 Zone Regular
- Posts: 354
- Joined: Thu Feb 12, 2009 11:00 pm
- Location: South wales
Know anyone who works with liquid nitrogen? I dip the metal with the bush inside into nitrogen for about a minute. Then tap the rubber with a hammer and it shatters- removed in seconds then gently saw through the outer metal ring left and out she pops. Not easy if don't know anyone but just in case you wasn't aware of it