Hi, Just taken posession of my 1987 320i from my father who has hung up his keys at 87yrs. Its in the process of a major refurb. The module failed some years ago and it was taken out and discarded by his local mechanic. I have got hold of a replacement but cant locate the 11 pin multi-plug that goes into it. The actuator in the door is connected up but the barrel micro-switch is just hanging unconnected(small round weather-proof plug with two pins)
Any body tell me whats supposed to be there and what goes into what. I have no schematics for the system
Any help most appreciated
Ps Have just signed up and think this could well be a great site to accompany my project. Do any of you get together, ie local meets etc
central locking
Moderator: martauto
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27978
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
Welcome to the zone,my dad,at 88 and still driving his E46 tells me I have to bury him with the gear knob in his left hand....
Start here with your c/l problems,it will give you an insight into how the systwm works and a few fixes;
http://www.e30zone.net/e30zonewiki/inde ... g_problems
Keep exploring the site,there's a meets section detailing where's and when's!
Start here with your c/l problems,it will give you an insight into how the systwm works and a few fixes;
http://www.e30zone.net/e30zonewiki/inde ... g_problems
Keep exploring the site,there's a meets section detailing where's and when's!
Youth is wasted on the young.
-
pud1
- E30 Zone Newbie

- Posts: 98
- Joined: Fri Aug 19, 2011 11:00 pm
- Location: Aberdare. UK
Thanks, Its probably by the accelerator then. The cars away having the body and paint done but when I get it back it will be the first job. Got new parts, locks etc off a touring. Its not rocket science but its been made harder by them pulling things out when no one was around to see where they came from!
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Schematics are here: http://www.autolib.diakom.ru/CAR/BMW/ No knowledge of Russian required.
Use 87 325e or 88 325i, depending on whether yours is pre or post facelift, although as far as I remember, the only difference is one different coloured wire.
Use 87 325e or 88 325i, depending on whether yours is pre or post facelift, although as far as I remember, the only difference is one different coloured wire.
-
pud1
- E30 Zone Newbie

- Posts: 98
- Joined: Fri Aug 19, 2011 11:00 pm
- Location: Aberdare. UK
thanks for that. Just had a look at 87 325e. Looks to be about right for my model. As soon as it comes back from the bodyshop I will be having a go.
