Anyone know where they go?
What pipes are these? IS Conversion Help--Please!!!
Moderator: martauto
-
SwirlyE30
- E30 Zone Squatter
- Posts: 1509
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Worthing-Brighton South Coast
- Contact:
Right guys, im trying to connect everything back up, but getting ocnfused by these three pipes,karan tried to help me, but i got a bit confused, and cut off.
Anyone know where they go?
Anyone know where they go?
1986 Chevrolet Corvette. 330ftlb torque....V8s rule!
-
bmw02rally
- E30 Zone Newbie
- Posts: 87
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Was Cardiff/ Now Gold Coast
Right mate,
The pipe on the left has a 90 degree elbow pipe and that fits to the brass outlet above it on the inlet manifold.
The pipe on right has a long pipe fitted on a plastic connector that then fits to an elbow connection that fits to the AFM pipe on the bottom.
Hope this helps!!
Regards
Mark
The pipe on the left has a 90 degree elbow pipe and that fits to the brass outlet above it on the inlet manifold.
The pipe on right has a long pipe fitted on a plastic connector that then fits to an elbow connection that fits to the AFM pipe on the bottom.
Hope this helps!!
Regards
Mark