If you test the resistor pack with an ohm meter, every pin should be connected by a very low resistance, with a maximum between any two pins of just a few ohms.
The cut out, and its contacts, can be plainly seen in your second pic.
Heater blower...
Moderator: martauto
-
Kedge
- Old Skooler

- Posts: 7698
- Joined: Thu Jan 13, 2005 11:00 pm
- Location: Leicestershire
Is the above resistor from an aircon car?
-
Hyperion
- E30 Zone Squatter

- Posts: 1727
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: JHB, South Africa
Yes it is.


